How to cut the bevel of the top line of the wardrobe, and when to decorate the wardrobe

Cutting method: The chamfering of the wall corner of the gypsum line is determined according to the size of the plaster line and the height of the paste. Stand the plaster line against the corner of the wall, draw two marking lines with a marker pen on both sides of the plaster line, and then measure the size of both sides with a steel tape measure.

Installation method: Nailing line method: Drill 2 10 mm holes in the place where there is a wire in the gypsum wire mold. The corner of the wall is fixed with the wooden square first, and the wooden square needs to be processed into a slope type according to the size and shape of the gypsum line, and the gypsum line is drilled and then fixed with self-tapping nails.

Sticking line method: Remove the putty of the base layer, expose the cement mortar plastering layer, and use glue to adjust the sticky powder. Apply the squeezed instant adhesive powder with your fingers to fill in the gaps that can be seen.

Corner line: that is, the shadow corner line, it is a building material that is designed to cover the boundary between the wall and the ceiling, and at the same time play a decorative role.

Precautions for installing the top corner:

When purchasing, you should choose one that matches the height of the house and the color and decoration of the wall.

When installing, the top corner line should be avoided by pressing and deforming, the joint should be smooth, the slim body should be clean, and the lines should be straight.

It is best to have a sandpaper sanding process and repair the completion, the effect should not be visible joints, and the defects are integrated with the indoor environment.

I've used it before, and I've had this problem, you can re-tighten the connectors, then put the wardrobe against the wall (about 2 cm away), and put two planks 3 to 4 cm under the foot in front of you, so that the cabinet is not so easy to tilt, and you can also find something like bricks to press the bottom.

There is no fixed formula or angle – as the angle of the apex varies from the angle of the riser. According to the actual situation, you need to do some experiments and find a suitable angle.

In terms of furniture selection, wardrobe is an indispensable piece of furniture in our daily life. So what should you pay attention to when choosing a wardrobe? Is it better to have a swing door or a sliding door, let's look down together.

1. Start from practicality.

The sliding door wardrobe has less space available; The wardrobe with swing doors has a lot of space to use. For the wardrobe with swing doors, you can also install hooks on the door of the wardrobe, hang some small items, and it is very convenient to use.

2. Start from tightness.

Let's look at the tightness, in comparison, it is better to have a wardrobe with swing doors. The wardrobe with sliding doors is often pushed and pulled when used, and the reserved space of the cabinet door is large, and the clothes in the wardrobe are easy to get wet in the rainy season in the south. The sealing of the cabinet door with hinged doors after closing is very good, and this will not be the case.

3. Start from the actual operation.

In the process of ordinary use, after the wardrobe with the swing door is opened, it is clear at a glance, and it is very convenient to find clothes. The wardrobe with sliding doors is only half visible, and it is slow to find clothes to wear.

4. Start from **.

When choosing a wardrobe, in addition to the style, ** is also very important. After comparing the two, in fact, the wardrobe with swing doors is cost-effective, **low. Due to the production process, the swing door is relatively simple, so the ** is relatively low.

For a lower budget, choose a wardrobe with swing doors.

5. Start from the choice of style.

In terms of style, there are many swing doors and strong optionality; The wardrobe style of the sliding door is relatively simple.

It can be seen that through the comparison of the above five aspects, it is recommended that you choose a wardrobe with swing doors. It should be noted here that in a small house, the space in the bedroom is small, or choose a sliding door wardrobe to save space.

1. It depends on the user, whether it is done on-site or outside, if the site is to change the water and electricity, pave the floor tiles, and then start the woodworking project. If it is custom-made outside, it can communicate with the on-site supervision of the decoration company, and it can be customized and installed in advance.

2. The wardrobe consists of a cabinet, a door panel (sliding door or a swing door), hardware (tie clips, drawers, pull baskets, clothes rails, shelves, trouser racks, mirrors, hinges, etc.). Generally, the wardrobe cabinet body is made of 18mm thick materials (particleboard, MDF, solid wood board, composite multi-layer board, finger joint board); The door panel (sliding door is made of 9mm wood material "UV panel, double veneer, corrugated panel, louver board, painted version" or 5mm glass sliding door; Swing doors are generally made of 16mm or 18mm materials); In general, hardware is matched for wardrobe manufacturers, and they do not produce it. There are also a few businesses that produce their own hardware for wardrobes.

Are you looking for a carpenter? Or do you want to make it in the store? of the former.

Wait until the bricklayer work is done and the carpentry work is done. In the latter, you can find the store to help you look at it before you start to decorate, you have to design the drawing, and there are many details of the problem, it is best to consider it before the decoration, and then get it troublesome after the decoration is completed.

It is also best to make a wardrobe after the primer putty is done again.

I don't know if you are paint-free or paint-free, anyway, the high-speed decoration personnel pay attention to protection. After the decoration is done, the cleaning will be ok k.

The decoration package is a contractor, that is, the decoration company purchases all the materials and construction required in the decoration project according to the requirements put forward by the user.

This contracting method is suitable for users who are extremely unfamiliar with decoration materials, and do not have the time and energy to purchase materials, and at the same time, the decoration company can purchase various decoration materials according to the user's requirements.

Decoration all-inclusive refers to the hard decoration is included, such as home water and electricity renovation, wall and floor tile laying, latex paint, ceramic tiles, flooring, cabinets, wardrobes, wardrobe sliding doors, shoe cabinets, sanitary ware, finished set doors, ceilings, background walls, labor costs, hardware door locks, hardware pendants, switches, etc.

1.Design phase.

The design stage includes the designer going to the house site to inspect the house, measuring the house, accurately measuring the size of the house and measuring the structure of the house, communicating with the owner about the general needs and ideas on the spot, making a reasonable functional plan for the house, making a floor plan first, and then selecting the style, color and product with the owner, and making a decoration design plan, including decoration renderings, decoration construction drawings, decoration budget, etc.

2.Construction phase.

The construction stage naturally includes the decoration materials used and labor costs, decoration materials include the main materials and auxiliary materials, auxiliary materials refer to water pipes, wires, cement mortar, putty powder, porcelain powder, hardware, decoration ceilings, etc., the main materials refer to floors, tiles, sanitary ware, bathrooms, switches and sockets, doors and windows, cabinets, wardrobes, etc., labor costs naturally refer to the decoration process of the plumber master, mason master, bricklayer master, carpentry master, oiler master, art master salary.

3.Main material installation.

The main material selected by the decoration company, the decoration company will arrange the business to install, and the installation stage of the floor tiles is synchronized with the basic decoration stage, so the main material should be selected in the construction stage, the cabinet and wardrobe should be measured in size, and the appropriate size should be reserved in the construction stage to facilitate the later installation.

3.Soft furnishings.

Soft decoration is the last stage in the decoration process, of course, it is also the top priority, "people rely on clothing, room depends on soft decoration", a high-quality soft decoration products can make your home more tasteful, soft decoration includes soft decoration design, procurement of soft decoration products, soft furnishings, so that your home is more fashionable, more exquisite.

The contents of the full package repair are as follows:

1. Materials include water pipes, halters, wires, switches and sockets, lamps, wood, wooden boards, floors, wooden doors, curtain frames, ceilings, kitchen counters, wall cabinets, wall and floor tiles, paints, hardware, accessories, etc.;

2. The decoration project includes: demolishing the old wall, building a new wall, cutting the trunking, and wrapping the downpipe isomer; Provide water pipes (cold and hot water pipes), wires (strong and weak electricity), gas pipe materials and installation and laying; Toilets are laid with drainage pipes, and lightweight materials are backfilled and leveled; Kitchen, bathroom, balcony wall (not less than 1 8 meters), ground waterproofing; Ground leveling treatment in each room; Bathroom, kitchen, living balcony floor tiles, wall tiles paving; scrape putty on the wall and top base, and brush latex paint on the surface; hardware installation; Installation of all room luminaires.

Wardrobe is an indispensable part of the family, in the home decoration wardrobe, some people choose to play the wardrobe, some people choose to customize the wardrobe. What we want to talk about today is what to pay attention to in the wardrobe of home decoration wardrobe, pay attention to the following five points, let's study it together!

1. It is not good to stick the large wardrobe directly against the wall at home, and the stability of the large wardrobe made without the back panel is not good, it is not easy to fix, and the wardrobe is deformed, and the installation and use of the cabinet door are problematic.

2. The pattern of the wardrobe should be reasonable, not just good-looking, after all, the storage and absorption functions of the wardrobe are more important.

3. The choice of wardrobe style should be considered well, many people go to choose the door after the wardrobe, and find that the wardrobe pattern is unreasonable, and the proportion of the door selected is not good-looking. For example, some wardrobes are old-fashioned, with a row of small doors above, sliding doors below, generally indoor shelves 2700mm, cabinets up 200mm back 100, small cabinet doors 650mm high, and more than 1750mm sliding doors high The proportion is ugly, which is crowded and stingy. The modern home decoration wardrobe door can reach about 2400, the internal pattern remains unchanged, and the overall atmosphere is beautiful.

In appearance, there is no difference from the overall wardrobe.

4. Choice of wardrobe doors.

Wardrobe selection is particular, there are elderly and children at home try not to choose glass sliding doors, if you choose glass sliding doors, it depends on whether the frame of the sliding door is strong, whether the sliding is smooth, if the sliding is not smooth, it is estimated that it will not take a few months to pull can not be moved, because the choice is a low-grade sliding door, it will be very troublesome at that time. When choosing the door, go a few more, compare more, everyone try whether the sliding door is smooth, a good sliding door is noiseless, has a certain texture, does not float or jump.

5. Most of the finished wardrobes can not make reasonable use of space, and there will be a very monotonous feeling after a long time, and the painted panel will be dark and lose its freshness after grinding for a long time.

Carpentry wardrobes are usually made of ordinary particleboard, which is filled with materials of different materials such as wheat straw, flax and bagasse, and a large amount of glue is added, which can easily lead to excessive armor. Nowadays, people are more and more attached to custom wardrobes.

1. What kind of board is good for making cabinets - MDF (fiberboard).

MDF, also known as fiberboard, is mainly made of finely crushed wood fibers that are pressed at high temperatures. The surface of MDF is smooth and flat, the material is fine, the performance is stable, the impact is resistant, easy to process, and the application is wide. However, MDF is not moisture-proof, and it is easy to expand and deform when exposed to water, so it is not suitable for cabinets in kitchens and bathrooms.

2. What kind of board is good for making cabinets - solid wood particle board.

Solid wood particle board is now a relatively new environmentally friendly substrate, produced according to the process of particleboard, with the essence of natural wood, relatively high-end environmental protection. At the same time, the processing performance is not bad with particleboard, and it has the characteristics of heat insulation and sound absorption. However, its process is relatively simple, so the quality difference is large, it is difficult to distinguish the good and bad products, and its bending and tensile resistance are poor, which is not suitable for making large cabinets.

3. What kind of board is good for making cabinets - solid wood multi-layer boards.

Solid wood multi-layer board is mainly made of three layers or more than one millimeter solid wood veneer or thin board by glue hot pressing, the core material is mainly poplar, miscellaneous wood and amine wood, etc., it has high strength and good stability. Solid wood multi-layer board has a large glue content, and it is necessary to do a good job of edge sealing treatment during construction to reduce pollution.

4. What kind of board is good for making cabinets - blockboard.

Blockboard is also a large core board, which has the characteristics of good nail holding force, firm quality, high strength, sound absorption, and heat insulation. Moreover, its moisture content is not high, the surface is flat, no warping, no deformation, and will not blister, which is an ideal material for interior decoration and high-end furniture production.

5. What kind of board is good for making cabinets - fir boards.

This is a kind of laminated timber, mainly made of large-diameter logs, which have been deeply processed and shaped like fingers. It can be painted and painted directly, saving a process compared to blockboard.

6. What kind of board is good for making cabinets - ecological paint-free boards.

Ecological paint-free board, also known as melamine board, has good stability, strong anti-deformation ability and strong nail holding force. Because the paint-free board has the characteristics of environmental protection and paint-free, it can meet the requirements of modern people for fast, environmentally friendly and convenient decoration, and can be used in cloakrooms, closets, wardrobes, cabinets and other decoration furniture.

7. What kind of board is used to make cabinets - fireproof board.

The fireproof board is made of siliceous material or calcareous material as the main raw material, mixed with a certain proportion of fiber materials, light aggregates, adhesives and chemical additives, and the thickness of the decorative board made by autoclaving technology is generally. Fireproof board is a very economical board, with high strength, fire resistance, moisture resistance, widely used in interior decoration, cabinets, laboratory countertops and other fields.

1. Solid wood.

When it comes to wardrobe materials, it is naturally the best of solid wood, avoiding the excessive use of adhesives, more healthy and environmentally friendly, strong load-bearing, safe and stable, and has a long service life, up to more than 500 ordinary board wood wardrobes, durable, but the cost of solid wood wardrobes is higher, so most of the wardrobes on the market use boards or boards to make wardrobes.

1. What's in the barbecue material list?

Answer: 1. Meat: mutton (lamb skewers), beef, chicken wings, chicken hearts, chicken gizzards, grilled sausages (ham sausages).

2. Squid, shrimp, fresh shellfish, fish, 4. Vegetables: green peppers, bell peppers, potatoes, cauliflower, eggplant, mushrooms, corn. Cucumber. Tomatoes, sweet potatoes. Onions.

5. Fruits: vegetable salad, watermelon, glaze, banana, apple, orange, etc. (there are a lot of fruits in Guangdong, you can consider what you want to eat).

6. Snacks: French bread, biscuits, dried tofu.

7. Assistive devices: paper towels, disposable tablecloths, tin foil. Small brushes, disposable drinking glasses, newspapers, disposable gloves.

8. Condiments: lemon. oil, salt, cumin, paprika, pepper. Peanut butter, ketchup. Honey, barbecue sauce. Lemon.

9. Necessary supplies: water, Mentholatan mint balm.