About Dental Scaling Surgery 200, About Scaling Surgery

That's not surgery, it's just cosmetic.

Teeth cleaning is generally 100-200 at a time, and it can be maintained for about a month.

Laser whitening is more expensive, at 2000-3000, and it is maintained for a long time.

Of course, it mainly depends on your daily maintenance.

I wish you a good appetite.

Basically, they are cleaning their teeth with lasers.

It will be washed very white, and there will be no sequelae.

The price varies from place to place, and it is basically the same as a minor surgery.

It's up to you how much you take care of it. It doesn't hurt.

I had a tooth the other day, and it wasn't a laser. It's just a water gun, okay. Some say this is good and some say bad, but I think it's easier to get tartar after cleaning, so it's better to wash it twice a year, and if you have dental disease, you can wash it four times a year.

About 200, wash about half a point, depending on how much tartar you have If there is more tartar, it will hurt and acceptable, and a little blood will come out.

Sandblasting and scaling, which can be removed, is about 300-500 yuan, and will not leave sequelae, ranging from 30-60 minutes.

Scaling uses advanced physical ultrasound to remove tartar and plaque from the surface of your teeth. In strict accordance with international standards, our hospital uses disposable oral appliances to avoid cross-infection. We are responsible for you and we are responsible for ourselves.

Regular teeth cleaning can maintain your teeth and gums and prevent periodontal disease from forming. This is because new plaque forms within half an hour of a thorough brushing, reaching its maximum within 30 days, and over time it becomes calculus (just like the dirt in a kettle, which is a build-up of bacteria). It may cause bleeding in your teeth, and regular teeth cleaning for adults about a year is better for your oral health.

Teeth cleaning takes about 30-40 minutes, and the price is 150 for a full mouth.

Supragingival scaling is the use of supragingival instruments to remove tartar and plaque and polish the tooth surface to prevent plaque and tartar from redepositing. Cleaning instruments are divided into ultrasonic scalers and hand scalers. Ultrasonic scaler cleans teeth, which is efficient, time-saving, labor-saving, and has a good effect on removing large pieces of tartar.

When operating, first turn on the power of the host; Adjust the power knob, press the foot switch, and gently touch the working head to the tartar at an angle of 15°; For thick and hard tartar, use high power to achieve the purpose of rapid stone crushing, but for small residual tartar, high power will cause damage to the dentin, so ultrasonic vibration can only vibrate on the tartar and plaque, and the small and medium power is also suitable for the small tartar or smoke spots remaining on the tooth surface, and clean the tartar and flatten the root surface with a short vertical or horizontal back and forth technique; It should be noted that the working head should not be vibrated at one point, so as not to cause coarse lines, depressions and holes on the surface of the tooth.

Ultrasound cleaning should not be used for patients with pacemakers, and it is generally necessary to use hand cleaners to complete the cleaning. When using, there should be a stable fulcrum, use the pen grip method, or improve the pen grip method, or palm thumb method to control the instrument. The stem of the instrument should be consistent with the direction of the long axis of the tooth, and the blade of the working end should be placed at the lower edge of the tartar, so that the fingers holding the instrument can feel the calculus, and then make the cutting edge close to the tooth surface and make the cutting edge at an angle of 80 ° with the tooth surface, and use the push and pull action or vertical, or horizontal, or oblique to make the pulling and scraping action.

When using a hoe, it mainly relies on the pull of the fingers. When using a sickle, the wrist rotation force of the hand is relied upon to remove tartar from the adjacent surface.

Jiezhi, a professional term in stomatology. Also known as teeth cleaning, commonly known as teeth cleaning. Periodontal cleansing is an important part of periodontal disease.

It can remove plaque, tartar and other major pathogens of periodontal disease. Tartar is formed after calcification of plaque, and the initial sediment is loose, and gradually thickens and hardens. Once the tartar has formed, it must be cleaned in time.

Periodontal scaling is divided into supragingival and subgingival scaling.

Ultrasonic scaler and hand instrument cleaning. 1.Ultrasonic scaler (1) Instruments: Ultrasonic scaler (2) Operation steps.

1) Start-up: Adjust the power after start-up, the power should be determined according to the thickness and hardness of the tartar, and after stepping on the foot switch, there is a water mist splash on the working head, indicating that the ultrasonic vibration has occurred.

2) Scraping and calculus: Gently move the front part of the working head at an angle of less than 15° to the bottom of the tartar when cleaning. Ultrasonic vibration is used to break up and shake the tartar.

Ultrasonic vibration can only vibrate on tartar or smoke spots, and should not be operated directly on the enamel or cementum surface repeatedly; When removing large and hard supragingival calculus, a segmentation technique can be used, that is, the large calculus is divided into several pieces with a working head to break it down, or the T head is placed on the edge of the junction between the tartar and the tooth surface to vibrate, so that the tartar and the tooth surface are separated and fragmented. Light force should be applied to move the head back and forth, and the head should not be shaken at a point, which will cause damage to the tooth surface.

3) Inspection and supplementary curettage: due to the light force, it is not conducive to the tactile sense of tartar, so after the completion of cleaning, the probe should be carefully used to check whether there is any omission, and some small or adjacent tartar should be supplemented and scraped with hand instruments.

4) Polishing: Because the tooth surface is rough or scratched after cleaning, it must be polished. You can use a polisher, such as a rubber cup wheel, to place it on the mobile phone bend head and rotate it at low speed, and dip it in polishing paste or toothpaste to polish the tooth surface.

Slight pressure can be applied to make the thin edge of the rubber cup protrude under the gingival margin, so that the tooth surface is smooth and free of nicks.