Solid wood furniture factory, how to put together the puzzle. Tell me ...

1 Preparation.

Before the rubber spelling of pine furniture, first of all, the secondary drying, rejection, cross-sectioning, pine furniture before the glue spelling, first of all, the second drying, rejection, cross-section, longitudinal and trimming and other processes. Above, cutting and trimming and other processes. Generally, the moisture content of the wood just purchased is more than 15%, if the processing and production are carried out directly, the pine furniture will produce cracking, bending, loose structure and paint gas processing and production, and the pine furniture will produce cracking, bending, blistering and other damage.

bubbles and other damage. The secondary drying of sawn timber should be about the same as the average annual moisture content of the product sales area, so that the average moisture content of the south is about 15%, and the average moisture content of the north is about 12%. Around.

In addition, some obvious defects of pine, such as cracking, decay, dead knots, knots, etc., should be further In addition, some obvious defects of pine, such as cracking, decay, dead knots, etc

row rejection, through cross-section, the plate is cut into a certain length of wool; The wool is removed by longitudinal section, and the plate is cut into a certain length of wool by cross-section; By longitudinal truncation of the wool, the side saw cut and trimmed, while removing defects such as knots, notches, etc., the wide wool saws are cut into suitable wide edge saws and trimmed, and defects such as knots and notches are removed at the same time. 1. In order to carry out cross-cutting processing on the pneumatic cross-cutting machine, the wool is for later glue assembly. Fig. 2 shows the trimming process on a single-piece stringer saw.

For trimming on a single-piece string saw.

Summary. Hello for your inquiries customers are always entangled in mahogany furniture puzzles at the time of each negotiation, it is best to make concessions at the time to obtain another kind of benefits and benefits. Otherwise, it will be too fast and too easy to make profits in sales.

In this way, the other party will feel that there is still a lot of room for profit.

Hello for your inquiries customers always know that the entanglement of mahogany furniture puzzles in each negotiation, it is best to make concessions when in order to obtain another benefit and advantage. Otherwise, in sales, it is too fast and too easy to make profits. In this way, the other party will feel that there is still a lot of room for profit.

Hello Household is a type of household registration in the ancient Chinese household registration system, which refers to non-indigenous households as opposed to the main household. It is not a uniform class or stratum, which includes landlords, yeoman farmers, urban peddlers, and vagrants. A client or customer may refer to a natural person or organization that offers money or something of value in exchange for the receipt of a property, service, product, or idea.

It is the purchaser of a commercial service or product that is late or, they may be the ultimate consumer, the person or the intermediary in the chain. The conventional wisdom is that customers and consumers are the same concept, and the meaning of the two can be indistinguishable. But for businesses, there should be a distinction between customers and consumers.

Customers are targeting a specific market segment, and their needs are more concentrated; Consumers, on the other hand, are individual, and their needs are more dispersed.

Think of a way for the landlord, build a thin wall on the exposed side of the cabinet and then make a cabinet, put the sliding door and see nothing, the new wall can fit the same wallpaper or latex paint as the room, it looks good and firm, and there is not much wasted space.

Yes, but the veneer should be pressed with hardware, and it is recommended to paste it directly with a veneer close to the sliding door, which is easier to operate.

1. Preparation of tools and materials: solid wood boards, saws, planers, planers, woodworking glues, fixtures.

2. Actual panel: material selection: material selection is related to the perfection of the board in the later stage, first of all, we must try to avoid some defects of wood, such as knots, cracks, notches, etc.

Then pay attention to the process requirements of the panel, whether it needs to be the same color, and note that even the same material color may be different.

3. Material treatment: a. Woodworking table saw cuts out the wool (note that it must be 2-3cm larger than the actual size of the piece, leaving a margin); b. The thickness of the material is processed through planing, planing, etc. Note:

For example, if you want to actually put a plate with a thickness of 25mm, you can process it to a plate thickness of 27-28mm.

4. Blank assembly: The impact of the blank on the quality of the finished furniture is very large, and unreasonable assembly of the blank may cause a series of problems such as serious deformation and even fracture of the finished furniture.

5. Puzzle process and basic requirements for wood surface treatment: the wood glued surface should be smooth, smooth, oil-free and not bent; Timber at right angles on two adjacent sides; The processing error of the wood glued surface is not greater than; Keep the glued surface of the wood fresh. Reason:

active groups on the surface of wood; Oleoresin oozing from the inside of the wood; Stress generated by wood under the action of external forces. Uniformity of pressure.

Yes, a lot of furniture is now assembled from plates, so it is more convenient to transport such furniture, and the assembly is also very fast. Such furniture is more convenient to use and more hygienic for the installation environment.

Yes. Because the furniture is very expensive nowadays, and the decoration is particularly time-consuming, it will be assembled with plates.

Yes, because such furniture is not very expensive and acceptable to ordinary families, but its practicality is also high.

Nowadays, most of the homes are assembled with boards, and many of them are logs, but the logs are more expensive, so the boards are more popular.

Yes, most of the furniture is now assembled from panels, and few people take the boards to the construction site and do it by the carpenter. Because of the different levels of craftsmanship of the workers, some people make the details of the cabinet are not good, such as the side of the cabinet to be sealed by hand, and nails and glue watermarks will appear. Moreover, if you do it on site, it will delay the construction period of other processes.

The plates are all in the factory, made by machine, and only assembled after being pulled to the site.

The single board is relative to the panel, and we also understand it well through the literal word, the so-called single board is a whole board that has not been spliced and repaired. Perhaps most people prefer the integrity of the single board, but often ignore the shortcomings of the single board, the whole large material has a high deformation rate, and through the splicing of small materials can overcome this shortcoming.

Advantages of puzzles. 1. Because the core board is made of wood with small anisotropy, the uneven surface of the board and the degree of warping are small, and the upper and lower surfaces are covered with thin wood thick veneer, which can better eliminate the uneven warping, cracking and deformation of the board surface, and can improve the physical strength of the board in all directions.

2. The overall sense of texture and color is very good, and the texture is more prominent after painting, and the whole set of furniture produced can create a harmonious and high-end sense of value.

3. After the solid wood panel is painted, there is no uneven glue seam and slats on the surface, and the physical properties are relatively stable in the process of long-term use.

4. The utilization rate of wood is high, which is in line with the principle of ecological utilization of raw materials. Therefore, in terms of use and texture color, solid wood panels are more suitable for the use and decoration function of furniture.

5. Although the amount of sizing of solid wood puzzle board is greater than that of solid wood wide panel, due to the protection of double-covered thick veneer, and the edge sealing of thick veneer on four sides is actually only 8 glue seams on both sides and four sides, so the chemical substances volatilized by the adhesive through the glue seam in the solid wood puzzle are far lower than the volatilization of solid wood wide puzzle board and solid wood laminated lumber, which is more environmentally friendly and healthier.

Shortcoming. The two-component adhesive does not have the desired effect on the bonding of hardwoods.

A good multi-layer solid wood board company is not only to look at, but also to consider many factors. It is suggested that you can find a few more comparisons. You can go to Shenzhen Xilin Decoration Materials Technology **** to understand.

Shenzhen Xilin Decorative Materials Technology Co., Ltd. has been focusing on the ecological board industry for many years, with modern standard workshops and fully automatic production equipment, a huge technical and customer service team to provide customers with 24-hour service, one-to-one response to customer needs, antibacterial, anti-ant, waterproof, acid and alkali resistance, anti-pollution and easy to clean. If you want to know more, please call us and look forward to cooperating with you!