The computer is bandwidth limited. 20

Give this one a try! The shortcut windows+r brings up the run dialog box. Enter it and click OK.

Bring up the Local Group Policyr, then select the Management module in the Computer Configuration, select Network in the Management module, then double-click on the QoS Packet Scheduler, select Limit to Reserve Bandwidth in the options bar on the right, double-click. In the pop-up screen, select Enabled to change the bandwidth that can be retained. OK on it.

Determines the percentage of connection bandwidth that the system can retain. This value limits the combined bandwidth reservation for all programs running on the system.

By default, the packet scheduler limits the system to 20% of the connection bandwidth, but you can use this setting to override the default.

If you enable this setting, you can use the Bandwidth limit box to adjust the amount of bandwidth that the system can keep.

If this setting is disabled or not configured, the system uses the default value of 20% of the connection bandwidth.

Important: If you set a bandwidth limit for a specific network adapter in the registry, this setting is ignored when you configure that network adapter.

Have you changed the cat?,4 trillion need 4 trillion cats to use Oh,No,You just hit 10,000 and splash it.,Telecom is the most "cow".。

If not, the easiest way is to reinstall the system and you're good to go.

If your computer is throttled, your network administrator may have set the limit. If you're using the internet at school, work, or in a public place, throttling speeds is a way to balance bandwidth usage and ensure the stable operation of the entire network. In this case, you should first contact your network administrator to find out why and how to remove the restriction.

If you're using internet sprambling at home and you're sure you don't have home network management software or tools that are throttling your internet speed, here are some things you can try:

1.Restarting your router and computer can sometimes fix the problem.

2.Update your NIC drivers and operating system to make sure you're using the latest version of the software and drivers.

3.Check if there are other devices that are slowing down the network, and if so, you can disconnect them or optimize their use.

4.If you're using a Wi-Fi network, check the signal strength and distance, and if the signal quality is poor, try moving the device location or resetting the router.

If none of the above solutions solve the problem, then you can fight or contact your Internet Service Provider (ISP) for a solution.

1.After clicking Start Run, typing:, and clicking the OK button, you can see the Group Policy window.

2.Under the "Computer Configuration" item, click on the following items: Management Template - Network - QoS Packet Scheduler; Then on the right side of the window, find the item "Limit Reservable Bandwidth" and right-click on it. In the pop-up menu, click "Properties" and you will see the "Limit Reservable Bandwidth Properties" window.

3.In the "Settings" tab, we can see that the value of the "Bandwidth Limit" of the Windows XP system is the throttled speed, for example, 20%.

Change it to a lower number such as 0 or 5% and click the "Enabled" radio button; Then click the OK button to save the new settings to your computer.

Once you've completed the above three steps, restart your computer. Hope.

Go to the router page, generally. After that, there is an IP bandwidth control inside, just turn it off.

Click Start-> Run or Win + R and press Enter to open Group Policy.

Computer Configuration -> Management Templates -> Network ->QoS Packet Scheduler", double-click "Limit Reservable Bandwidth" in the right setting bar, set "Limit Reservable Bandwidth" to "Enabled" in the "Settings" tab of the properties dialog box that opens, and then set the bandwidth value to "0" in the "Bandwidth Limit" ( ) column below.

How to remove wifi speed restrictions on your wireless router:

1.The system is connected to a WiFi network.

2.Open a computer browser and enter the gateway IP address of the nameplate on the back of the router (generally, enter the gateway configuration interface.

3.Go to the bandwidth control settings interface in the router advanced, uncheck the enable buttons for all bandwidth control items, save it, or directly uncheck the bandwidth control function.