Which big brother can help My computer won t turn on 15

You should have plugged the memory upside down, the socket should be burned, in order to reduce the loss, please do the following tests, a handful of memory, find a place to test it, see if it is not easy to use, the general burning time is short, it may be able to be used, if the time is long, then there is no way to say.

The second is to test the other ports of the motherboard to see if there are any problems.

None of these questions are 100 percent accurate, and it's impossible to say that it doesn't work without testing.

You try it, if the mouth doesn't work, then change the motherboard.

If the memory is not good to use, then change the memory.

It's better to repair the child than to change it to another one, and sell it in disguise. Ha ha.

Dizzy, your motherboard should be burning.

The memory of RAMOS is different from the memory of DDR now, and you can't mix them in terms of working mode and working voltage.

You take the new memory and try again. Hopefully the memory burns or you'll have to change the motherboard.

Dizzy, wangxyi said it very well, master, I have nothing to say, wangxyi, let's make friends, okay. It's mine.

Take it out.,Try another slot.,I hope one of the slots can still be used after burning one of the slots.。。

What was said upstairs makes sense.

I also burned it once. Ha ha.

Big brother's memory is burned.,I think that memory slot won't work.

Khan, you're not operating with electricity, are you?

There are many reasons for the blue screen of the computer, and they need to be eliminated one by one.

1. Software. The reason for the software may be that there is a virus, which causes the system to run abnormally, and the solution to this problem is to thoroughly check and kill the virus, and there is no special shortcut; In addition, due to the incompatibility of the hardware driver resulting in a blue screen, the solution is to find out the incompatible hardware driver, delete it, and then replace the original driver; System instability may also cause a blue screen, which means that the installed system version itself has a bug, and the system is originally unstable, so it will cause a blue screen; Incompatibilities between different software can also lead to blue screens. In terms of software, the biggest possibility is that viruses and drivers are incompatible.

2. Hardware. Hardware failures of the motherboard, memory, power supply, and hard disk can all cause a blue screen.

The blue screen in terms of hardware is more difficult to eliminate, can only be judged based on experience, one by one hardware exclusion, and finally determine which component is the problem, the solution to the blue screen is to reinstall the system first, after the installation is completed, do not open any hard disk partitions, install antivirus software to upgrade to the latest version, thoroughly check and kill the hard disk to see if there is a virus, see if there are any abnormal files that look like viruses, etc. After installing the system, try to install the original driver, if there is still a blue screen fault after the above steps are completed, then it is likely to be a hardware reason, it is recommended to find a professional maintenance place to do a test, and ask them to check what the reason is. In addition, factors such as dust, as well as loose interfaces of the motherboard are also possible causes of blue screens.

You can check if the CPU has too little silicone, and plug in the various parts on the motherboard tightly. Generally, the blue screen is related to memory and hard disk, focusing on detecting these two.

This can't be called can't be turned on, it should not be called into the system, there is a problem with the system.

In this case, you can only take the chassis to the electronic city to see. See if it's a problem with the chassis, or if it's a problem with the display.

See if you can fix the system? If you can't, you'll have to reinstall the system.

First, check the connection issue with the keyboard.

Plug the keyboard back in and out to see if the problem is solved.

If nothing happens when plugging and unplugging the keyboard, it could be a memory or motherboard issue.

Unplug the memory and start it to see if you can enter the system self-test.

If you unplug the memory system and still can't start, then you have to unplug all the boards, the motherboard only has the graphics card, start to see if there is a problem, if there is still a problem, and the motherboard is in the protection, find a seller to change a motherboard.

If only one of the individual boards has an impact on the machine, change that board separately.

Try to remove the CMOS battery and put it down, and it can be solved if the hardware is fine.

It must be that the inner strip is loose, or the inner strip interface is oxidized for a long time, and the contact is not good, wipe it with hydrogen peroxide and then install it.