Is living on the first floor susceptible to moisture, and will it also affect the decoration?

The first floor is generally easy to regain moisture, especially in the rainy season, there are water droplets on the walls on the first floor, and the decoration wants to change, which is a little difficult. High-rise, there are garages underneath, generally not damp,) If the old house in the past, there is no ventilation hole in the low ground, the floor is not separated from the ground, the ground is easy to be damp, when decorating, the ground is made a layer of waterproof, the wall is also waterproof to half the height of the room, the wall is painted with latex paint, do not decorate too much, the putty wall can also absorb a little moisture, it is best to install ** air conditioning, when the humidity is severe, you can turn on the air conditioner to dehumidify, decorate less tiles, reduce the moisture in the house condensation into water droplets.

Yes. First of all, the humid environment will have an impact on the storage of decoration materials, which is self-evident, not only that, the new house after decoration will be polluted, and the difficulty of humid environmental pollution control will become greater. Generally speaking, it only takes about two months to deodorize a new house, but if you live on the first floor, it is not surprising that it will take more time or even a year and a half.

Living on the first floor is definitely very susceptible to moisture, but if you do a good job of moisture-proof layer when decorating, the impact will not be great.

Normally, the house on the first floor is more susceptible to moisture, because there is a lot of moisture in the soil, whether it is from the cracks such as doors and windows or from the floor to infiltrate, it will cause the first floor to be more damp.

The first floor is easily affected by moisture due to its low floor, short shade exposure time, and large ventilation, which is directly affected by the external surface. If you want to decorate, it is best not to use materials such as wood.

Yes, the first floor is more susceptible to moisture, and it will not affect the decoration, as long as your floor is well insulated in the early stage, there will generally be no major problems later.

Yes, the first floor is generally more prone to moisture, and the sunlight is not very good, if it is the kind of basement above the ground, it is better to buy a building with better lighting.

See if there is an overhead floor below, or an underground garage. If there is one, it is fine, if there is none, it is indeed a little damp. It must also have a certain impact on the decoration, but it can be treated with moisture.

To be honest, the first floor is basically the second floor now, and it feels like there is a basement below, so there will be no dampness, and the decoration has no effect, so don't worry.

If you live in a house with only one floor, consider partitioning the ceiling at the top. If the ceiling height is sufficient, a suspended ceiling can be erected indoors. If the house has a second floor, you don't need to use it, the design windows are larger, and the whole wall is used as a curtain, and the visual effect is also very good.

I like it in the bedroom, it's very comfortable.

The floor is raised and then the floor tiles are high-grade. This is the same as the floor decoration practice of the store, and the height is to try not to let the ground gas come up, and do not pave the floor, which is easy to penetrate. Poor floor tiles can also grow moss.

The exterior wall is separated from the solid wall by 3-5 cm, and the air-to-air gypsum board wall is erected with a steel bar keel, (do not use a wooden keel, otherwise the moisture-proof effect will be gone.) It can effectively prevent penetration and sound insulation.

Anyway, when I used to live on the first floor, the biggest drawback was that it was easy to get damp in summer, especially during the rainy season, and you could see that the corners of the walls would get damp and moldy. No matter how good the decoration is, there will be different degrees of mildew, which is very bad, and there are too many mosquitoes in summer, which is already humid and heavy, and it will really be maddening if the hygiene is not good, but the advantage is that you don't have to climb the stairs, there are pros and cons, depending on your choice.

If people buy a house on the first floor, the first floor is very damp and has a great impact on people. If you live in a very humid environment for a long time, you are prone to diseases such as rheumatism. Items placed on the first floor will continue to mold due to the humid environment, and some foods will spoil due to excessive moisture in the environment.

In addition, if the environment on the first floor is in direct contact with the ground, and the plumbing pipes are laid directly underground, then there will be a problem of moisture regain.

On the whole, the impact of humidity on people is still quite large. First, life is inconvenient. Living in a relatively humid room with serious moisture regain for a long time will greatly affect people's health.

People with a lot of water in the body will get rheumatism due to the influence of a humid environment, and the items at home will also become moldy, which is very inconvenient to use, and it is difficult to meet the requirements of comfort in the living environment. Although the first floor is convenient, the biggest problem is the lighting. If people choose to live on the first floor, and there are many high-rise buildings around, the lighting will be very poor, especially the windows are not too sunny, which will aggravate the damp and dark phenomenon.

Buying a house is a very important thing, and people are worried when choosing the location and various factors of the house. If you're afraid of anything that doesn't fit in, you'll regret it for the rest of your life.

Second, older people don't like humid environments. In large cities, especially in many residential areas with many buildings, buildings are getting taller and taller. At the same time, the ** on the first floor is also cheaper than many high-rises, so many people choose to live on the first floor for convenience.

According to many people from property management service companies, the older the owners, the more they prefer to live on the first floor for the convenience of travel, because there are no stairs and no need to take the elevator, and it is more convenient to go up and down the stairs. However, although the first floor is easy to get in and out, if the lighting is not good and causes dampness, try not to live on the first floor, especially for the elderly.

It is very convenient for the elderly to go out and exercise. Because of calcium deficiency, the elderly are not in good health and have loose bones, so they cannot walk or exercise more. With this intention, many elderly people and their children will choose a low-floor environment, especially the first floor, when buying a house for the elderly.

However, if the lighting on the first floor is not good and it will be very humid, it will cause harm to the elderly body, and the gains outweigh the losses.

I bought a house on the first floor, and the dampness on the first floor has an impact on people, but the current building design is more reasonable, even if it is the first floor, it will not be damp to **, and it is completely safe to buy.

Living in the humid space on the first floor for a long time can lead to serious joint diseases or rheumatic diseases, which will affect people's health.

It doesn't have much impact, but remember to ventilate more, the light may not be good, and when the sun is good, take out your own bedding to dry.

The house on the first floor is closest to the earth, so it is very easy to get wet, so let's talk about how to decorate the first floor without getting wet.

01 When we are decorating, we should open the windows and keep the air circulation on the first floor, so that the decoration on the first floor will not be damp.

02 When we are decorating, we can make a layer of waterproofing on the floor surface of the house, so that the ground can reduce the moisture on the ground, and it will not be so humid when decorating.

03 We should also carefully inspect the house for obvious cracks and cracks, and if we find cracks on the ground or walls, we must repair them in time, otherwise moisture will seep out of the cracks.

04 When we are decorating, we can add a layer of linoleum under the floor when laying the floor, so that we can isolate the moisture on the ground, so that the decoration will not be damp.

If it is a high-rise, the first floor is likely to be damp and a little more humid than the other floors. So if you buy a house, try not to buy the first floor and the top floor. Individuals should choose on a case-by-case basis.

There is a possibility of back-tide, which is related to the local environment, and some of the more humid environments may indeed occur.

The first floor is raised above the horizon and is not overhead, if you want the ground not to return to moisture, the experienced mason master will tell you: when the new house is built and selected, it is generally a ground circle beam structure, before filling the floor in each small room, a layer of plastic mulch film is laid on the ground level, and the concrete is paved, so that the moisture in the ground will be blocked by the plastic mulch, and the ground in the room will not return to moisture.

Staying on the ground floor will definitely be damp.

Precautions for the renovation of the first floor.

The balcony is best waterproofed and tiled. The 1st floor will be very damp, and many of the 1st floor balconies have peeling paint and are very unsightly. Therefore, it is best to do waterproofing on the first floor, and tile the walls, window sills and floors.

How to deal with the first floor if it is too damp.

1) You can use desiccant and activated carbon, activated carbon has the effect of deodorizing, removing formaldehyde and other harmful substances, and can be moisture-proof and hygroscopic. If you want to have a better effect, it is recommended to buy more than one instead of going to the supermarket to buy the already packaged ones, as long as you buy them in bulk.

There are many desiccants in supermarkets that are specially designed for moisture-proof and dehumidification. The most common are the two types of dehumidifiers and dehumidifier kits.

In addition, dehumidification bags made of absorbent resin and charcoal are more suitable for placing in small spaces, such as wardrobes, shoe cabinets and other confined spaces, where you can hang a bag of dehumidification bags to expel moisture.

2) Use a small cloth bag to fill an appropriate amount of lime, tie it into a small bag and place it in all corners of the room, the lime itself has the effect of moisture absorption, and can also slow down the indoor dampness, or find a carton to load quicklime, put it in an inconspicuous place in the room It is OK, both to remove moisture and disinfection, killing two birds with one stone.

3) Buy an air dehydrating breather, the principle is very simple, just like a vacuum cleaner, it has a bottle that can concentrate the wet air together, and wait until the moisture will turn into water many times.

The most important period of moisture prevention is in the morning and evening every day, when the air humidity is higher than at noon, and if the doors and windows are not closed in time, the moisture will seriously penetrate into every corner of the home. In addition, if you feel that the doors and windows are closed and the indoor air cannot circulate, it is recommended to open the windows for ventilation for a short time at noon.

Nowadays, air conditioners used in general homes have the function of dehumidification. However, the use of air conditioners to regulate the humidity of indoor air is slower, usually takes two or three hours, and can make people feel cold indoors. If you are not satisfied with the dehumidification effect of the air conditioner, you may wish to buy a special dehumidifier in the shopping mall, which has a faster effect but consumes relatively more electricity.

Nowadays, in the decoration, water, electricity, waterproofing and other hidden projects that are recognized by everyone usually get our attention and are not easy to ignore. However, the rarely mentioned sound insulation, the problem of moisture-proof ground and wall is easy to be ignored. These problems have a direct impact on the comfort of the living environment.

If it is planned before the decoration, it is easier to carry out the construction during the decoration, and it is basically impossible to remedy it after the construction is completed, and if it must be done, it will often pay a great price.

Usually the ground on the first floor, the wall is 1 meter high, the basement, the warehouse floor, etc. must be moisture-proof, if it is a house above the second floor, you can choose to do it, such as the bathroom, the floor and wall between the kitchen to do moisture-proof treatment.

The general owner is very easy to confuse the concept of moisture-proof and waterproof, and often treat moisture-proof and waterproof as the same, thinking that waterproof is moisture-proof. This is a comparative misconception. Moisture-proof: What we need to protect against is moisture (i.e., water vapor), while waterproofing is mainly against liquid water.

The molecular density of the waterproof layer has no way to stop water vapor. Therefore, moisture-proof cannot be done in a waterproof way. Especially on the ground floor, or in a house with a basement, moisture protection is still very important.

Moisture can cause us these troubles:

1. Underground moisture will corrode our floors;

2. In the ground moisture return season, the moisture content of the indoor air will be seriously exceeded, and living in this humid environment will have an impact on our health.

Moisture-proof must be done on the cement base of the ground and wall, otherwise it will have no effect. And moisture protection needs to be done before waterproofing. In this way, the waterproof layer can be prevented from falling off and blistering. Moisture-proof requires the use of professional moisture-proof materials, not waterproof materials.

Moisture-proof materials must have these characteristics: First, there is a permanent moisture-proof effect, this is a concealed project, if it is used for a few years and fails, then there is no way to remedy. Second, it must be an environmentally friendly material, without any volatiles, and the moisture-proof is made of the entire ground at home, so products with volatile substances cannot be used, and the volatile area is too large.

First, it has a permanent moisture-proof function, it has the ability to resist groundwater pressure and air pressure, and the 20-30mm moisture-proof layer that it will form is permanent, and it is integrated with the cement base surface, and it will not.

Shedding, blistering, damage.

Second, it is all inorganic, without any volatiles, and it is non-toxic.

Third, the construction is simple, as long as the original cement floor, the wall can be sprayed twice. The construction period is short, you can walk an hour after construction, and you can carry out the next process in 72 hours.

Fourth, the cost is low, the cost per square meter is about 20 yuan.

Living on the first floor is damp that is certain, generally speaking, you can specialize in coating waterproof paint under the floor before repairing, and then install the floor, the highest air is a little higher, so that the ground can be less, the boss you have money to install floor heating for the whole family, and then you must pay attention to the choice of floor materials!