GB50340 2016 why it was abolished

With the same question, GB50340-2016 was implemented in July 2017 and abolished in October 1018.

Core tip: The announcement of the Ministry of Housing and Urban-Rural Development on the national standard "Code for the Design of Residential Buildings for the Elderly" is hereby approved as the national standard, numbered GB50340-2016, which will be implemented from July 1, 2017. Among them, the

This is a mandatory provision and must be strictly enforced. The original "Code for Acceptance of Construction Quality of Ventilation and Air Conditioning Engineering" GB50243-2003 shall be repealed at the same time. This code is organized by the Institute of Standards and Quotas of the Ministry of China, published by the China Planning Press, and the announcement of the Ministry of Housing and Urban-Rural Development on the national standard "Code for the Design of Residential Buildings for the Elderly" is hereby approved as the national standard, numbered GB50340-2016, which will be implemented from July 1, 2017.

Among them, theThis is a mandatory provision and must be strictly enforced. The original "Code for Acceptance of Construction Quality of Ventilation and Air Conditioning Engineering" GB50243-2003 shall be repealed at the same time.

This specification is published and distributed by the China Planning Press organized by the Institute of Standards and Quotas of our ministry. Ministry of Housing and Urban-Rural Development, October 25, 2016.

Whether GB50310-2002 is repealed.

GB50310-2002 project cost management code is a document issued by the state in 2002, and the validity period of this document has passed, and it is no longer valid. According to the "Regulations on the Management of Engineering Cost" issued in 2018, which abolished GB50310-2002, the alternative standard is "GB 50311-2016 Project Cost Management Code". And GB50310-2002 is still in the state of the document, which can be used for reference or reference.

Summary. The "applicability" required by the standard is to emphasize the consistency of the system configuration and the functional application requirements, and the synchronization of the technical methods and the development of science and technology that keeps pace with the times.

The "openness" required by the standard is the continuity of the selection of intelligent technology methods and the adaptation of functional expansion and technological development trends, which requires the designer's engineering design experience precipitation and insight into future development.

The "maintainability" required by the standard is a clear requirement that after the completion of the construction of the intelligent system project, the continuous improvement of the intelligent comprehensive technical efficacy in the life cycle of the building and the continuous excavation of making it play a more effective supporting role, therefore, to meet the operation and maintenance of the building intelligent system engineering after delivery, should also be used as one of the basic requirements for the application function of the building intelligent engineering design function.

The "scalability" required by the standard is one of the significant technical characteristics corresponding to the development of the scientific and technological connotation of intelligent building engineering in modern buildings with the times, so the intelligent technology that embodies the progress and innovation of engineering science and technology will become one of the important engines to promote the development of modern construction engineering.

The difference between GB50314-2015 version and 2019 version.

The "applicability" required by the standard is to emphasize the consistency of the system configuration and the functional application requirements, and the technical methods adopted such as shouting and accepting and the synchronization of scientific and technological development that keep pace with the times. The "openness" required by the "Standards" is the continuity of the selection of smart technology methods and the adaptation of functional expansion and technology development trends, which requires the designer's engineering design experience precipitation and insight into future development. The "maintainability" required by the "seepage cluster standard" is a clear requirement that after the completion of the construction of the intelligent system project, the continuous improvement of the intelligent comprehensive technical efficacy in the life cycle of the building and the continuous excavation of making it play a more effective supporting role, therefore, to meet the operation and maintenance of the building intelligent system engineering after delivery, it should also be used as one of the basic requirements for the application function of building intelligent engineering design.

The "scalability" required by the standard is one of the significant technical characteristics corresponding to the development of the scientific and technological connotation of intelligent building engineering in modern buildings with the times, so the intelligent technology that embodies the progress and innovation of engineering science and technology will become one of the important engines to promote the development of modern construction engineering.

Hello, in fact, this standard rules and regulations are held and we are intelligent design, not as a reference object for the focus of God's attention, there are only two mandatory provisions, and the others can be used as design references. Dear, I hope it can help you!

1. GB T50344-2004 has not been replaced by GB T50784, and the detection content and scope of application of the two are different.

2. GB T 50344-2004 "Technical Standard for Building Structure Testing" is applicable to the testing of the quality of various structural engineering in construction engineering and the testing of the performance of existing building structures. The GB T50784-2013 "Technical Standard for On-site Testing of Concrete Structures" is applicable to the detection of concrete structures in construction projects, mainly including concrete mechanical properties testing, concrete long-term performance and durability testing, hazardous substance content and its effect testing, concrete component defect detection, component size deviation and deformation detection, concrete reinforcement detection in concrete, concrete component damage detection, presumption of remaining service life under environmental action, structural component performance inspection, etc.

GBT 50344-2004 Technical Standard for Inspection of Building Structures.

GBT 50784-2013 Technical Standard for On-site Inspection of Concrete Structures.

These two are separate standards, and the latter does not replace the former.

The standard text is attached to the annex.

Summary. Dear questioning users, the latest version of GB50243 is 2017. July 1, 2017.

GB50243-2017 will be implemented on July 1, 2017. GB50243-2017 is the "Code for Construction Quality Acceptance of Ventilation and Air Conditioning Engineering" (GB50243-2017). In 2017, China Architecture & Building Press published the book "Implementation Guide of GB50243-2016 Code for Acceptance of Construction Quality of Ventilation and Air Conditioning Engineering" which was published by China Architecture & Building Press in 2017.

Dear question: Brother Qi Chi Hello users, the latest version of GB50243 is 2017. July 1, 2017. GB50243-2017 will be implemented on July 1, 2017.

GB50243-2017 is the "Code for Construction Quality Acceptance of Ventilation and Air Conditioning Engineering" (GB50243-2017). In 2017, China Architecture & Building Press published the book "GB50243-2016 Implementation Guide for Construction Quality Acceptance Code for Ventilation and Air Conditioning Engineering", which was published by China Architecture & Building Press in 2017.

Summary. Code for Acceptance of Construction Quality of Ventilation and Air Conditioning Engineering" is a national standard, numbered GB50243. The latest version of this standard is 2016, but it is important to note that some specific content may change due to policy changes.

Code for Acceptance of Construction Quality of Ventilation and Air Conditioning Engineering" is a national standard, numbered GB50243. The latest version of this standard is 2016, but it should be noted that some specific content may change due to the adjustment of the policy.

Ventilation and air conditioning engineering construction quality acceptance code" is the national standard for the burial of the company, numbered orange reputation GB50243-2016, effective from July 1, 2017. Among them, theReed Ant

This is a mandatory provision and must be strictly enforced. The original "Code for Acceptance of Construction Quality of Ventilation and Air Conditioning Engineering" GB50243-2002 shall be repealed at the same time.

Legal Analysis: Indoor Environmental Pollution Control Standards for Civil Construction Projects GB 50325-2020 was approved and issued by the Ministry of Housing and Urban-Rural Development of the People's Republic of China on January 16, 2020.

Legal basis: The standard for the control of indoor environmental pollution of civil construction projects in Qinpai is GB 50325-2020, which will be implemented from August 1, 2020. Among them, theThis article is a mandatory provision and must be strictly enforced.

According to the official inquiry of the national standard, GB50303-2002 is the current standard, and there is no new standard.

See screenshot below