How to solve the problem of condensation at the tuyere? Why is there condensation at the air outlet?

Changing to another air outlet can solve your problem.

Reason for condensation at the air conditioning outlet:

1. **The air humidity in the air conditioning tuyere area is large;

2. Due to the unreasonable setting of the fresh air system in the air-conditioning area, excessive negative pressure is generated, which makes the unorganized outdoor air enter the room and improves the humidity and condensation temperature of the air;

3. **The air conditioner itself adopts a large temperature difference to supply air, and the air supply volume and cooling capacity of the machine itself are not equipped, resulting in too large cooling capacity and too small air volume;

4. **The air supply outlet of the air conditioner is made of aluminum, which makes the surface temperature of the air outlet material too low and condenses due to good thermal conductivity.

The tuyere drips, most of the reason is because when the air conditioner is turned on, the window is opened to let the hot and cold air meet and the water vapor in the hot air is condensed, and the material of the tuyere is generally made of aluminum alloy, which has strong thermal conductivity, so it is more likely to occur this phenomenon.

If possible, set the set temperature a little higher, e.g. 26.

When the air conditioner is refrigerated, there are the following reasons for the condensation phenomenon in the window of the internal unit:

1) The remote control setting temperature is low;

2) High humidity of ambient air;

3) Set low wind speed in the indoor wind speed;

4) When the angle of the wind deflector is not adjusted properly and blows downward or swings downward for a long time, the temperature difference between the inside and outside of the wind deflector is large, resulting in condensation.

If the above phenomenon occurs, please adjust the set temperature so that the temperature difference is lower than 5 degrees, if your indoor humidity is high, please set the air conditioner to the dehumidification function, if there is no such function, you need to keep ventilation; At the same time, please set the wind speed to medium and high wind speed to effectively reduce condensation.

As far as the traditional treatment method is concerned, the general way to solve the problem of condensation is to install an electric heater, fan, desiccant or seal the cabinet body, which can solve the problem of moisture and condensation in the cabinet in a short time, but can not solve the problem of moisture in the cabinet.

Because: 1) with an electric heater, the inside of the equipment is heated to solve the condensation phenomenon, but this method can not fundamentally eliminate the condensation, the reason is that this method only increases the degree of unsaturation of water vapor in the air, and does not discharge the water vapor in the cabinet.

2) Use moisture repellent to hang silicone bags or other water-absorbing materials in the cabinet, but in fact, because its water absorption effect is limited, and the absorbed water is difficult to discharge, the effect is often not obvious, and the maintenance workload increases.

3) Use a fan to reduce the humidity in the electrical cabinet through the convection of the air and the dry air outside, and it does not work when the ambient humidity is large, which is easy to cause dust and dirt to enter and cannot achieve the purpose of moisture-proof.

1. Choose a professional air-conditioning installation company. This is the most effective way to avoid dripping water at the air outlet of the air conditioner, the quality of the insulation effect, whether the air outlet installation is smooth, and whether the drainage pipe installation is smooth are the key factors for the air conditioning outlet to drip water.

2. Choose a better material for the air outlet. For example, ABS material or wooden tuyere can be used, ABS material tuyere has the characteristics of anti-condensation, acid and alkali resistance, anti-aging, uniform airflow distribution, adjustable airflow blowing angle, etc., or plant some anti-condensation things on the air conditioning air conditioning tuyere, such as sponge.

3. Reasonable operation of ** air conditioning. If the air conditioner air vent is a side outlet, adjust the horizontal louver to blow upwards as much as possible to prevent the louver from flowing out after condensation; Appropriately increase the air supply temperature, increase the air supply volume of the air conditioner, and try to adjust the wind speed to the highest gear or open the regulating valve as much as possible; Minimize the number of times you open the door and check that the room is not sealed enough from the outside world.

It should be determined according to the type of indoor unit of household ** air conditioner; Under normal circumstances, the setting temperature of the indoor unit is increased, the air gear is opened at the same time, and the air guide strip of the air outlet is opened to the maximum position, which can solve most of the problems of condensation dripping;

If the dripping water is not caused by condensation at the air outlet, it is necessary to find the manufacturer to report for repair, which may be caused by poor internal condensate drainage or air leakage.

In the hot summer, the temperature is very high both indoors and outdoors, which is unbearable. We have installed air conditioning in every house, and now there will be ** air conditioning in public places as well. Air conditioning not only brings coolness to the hot summer days, but also improves work efficiency.

So attentive users will observe that the air conditioning outlet will drip water? What's going on here? So, what is the reason for the dripping water at the air outlet of the air conditioner?

**How to solve the problem of dripping water at the air outlet of the air conditioner? Next, we will introduce in detail the causes and solutions of dripping water at the air outlet of the air conditioner.

**What is the cause of dripping water at the air outlet of the air conditioner

1. **The air humidity in the air conditioning tuyere area is large;

2. The insulation is not done well. Due to factors such as high cost performance, moderate and other factors, many families are using aluminum alloy material tuyere, but it should be noted that in the summer refrigeration, the air supply temperature is too low, the insulation is not done well during construction, and the aluminum alloy material tuyere is prone to condensation.

3. **The installation of the air conditioning installation company is not in place. If the air conditioner is not in place during installation, the connection of the four walls of the vent is uneven and unsealed, causing dripping, and it is easy to cause a series of other problems.

4. Poor drainage pipes. Poor drainage due to age, slack or bending of the drain pipe into a wavy shape. Alternatively, the drain pipe leading out of the exterior is artificially blocked or the drain is blocked by stolen goods, so that the condensation cannot be discharged.

Resolution

1. Change the material of the air outlet, the material of the air outlet is wooden tuyere, aluminum alloy tuyere and ABS tuyere. Among them, the wooden tuyere is the least prone to condensation, but the cost is high and it is also easy to mold; Aluminum alloy tuyere is the most prone to condensation, but it is cost-effective and durable; ABS tuyere is also not easy to condense, but it is easy to turn yellow after a long time; Therefore, there is no perfect tuyere, and the choice of which material tuyere needs to be considered by the user.

2. When using the air conditioner, close the doors and windows tightly to keep the room dry. Because when the air conditioner is turned on indoors, opening the door too often will allow the outdoor humid air to mix, and the temperature of the air conditioner outlet is low, which is easy to produce condensation.

3. When the air conditioner tuyere drips, the user can adjust the air outlet temperature of the air conditioner, the air outlet temperature is high, the temperature difference is small, the water vapor in the air is not easy to condense, and it can also reduce condensation, but the comfort is reduced.

4. If the temperature of the air conditioner is increased, when the air conditioning tuyere is still dripping, the air conditioning outlet air speed can be adjusted to the highest, and the high air velocity of the tuyere can speed up the evaporation of condensation dew, so that the condensation and evaporation can reach a dynamic balance, so as to reduce the condensation dripping of the tuyere.

If the air conditioner is used for a long time, it is inevitable that it will break down. Some faults we need to call ** to the maintenance center, but more often we only need to learn some theoretical knowledge, and some simple faults we can solve by ourselves. We know that we can only apply something better when we learn the theoretical knowledge of something.

The air outlet of the air conditioner is always dripping, teach you three tricks to get it!

Dusty air conditioners tend to absorb dust in the air when used. If you don't pay attention to cleaning at home, dust will accumulate inside the filter and machine, and the water droplets that accumulate on the evaporator will become blocked by dirt and cannot flow into the sink, and there is a high risk of water leakage.

The most thorough solution to this situation is to clean the air conditioner as a whole, so that the condensate inside can flow into the sink normally and will not leak.

The internal galvanized sheet is offset or deformed. The air conditioner has a galvanized sheet inside for diversion. If this thing is not installed in place, or if it is offset or deformed in the future, the condensate will not flow smoothly to the sink. Then it will leak.

This kind of galvanized sheet should be reassembled or replaced with a new one. If it is caused by a design flaw in the product itself, it can be solved by installing a water baffle.

Refrigerant ProblemIf there is not enough refrigerant inside the machine, in which case the machine will start to freeze. Ice encounters hot air outside that forms water, which can also cause water leaks. If it is a newly bought machine, it is recommended to contact the after-sales company first and let them come to inspect it.

If it's a machine that's been in use for many years, it needs to be replenished with refrigerant so that it doesn't leak anymore.

Sometimes we set the wind speed to be low when we turn it on. If the temperature difference in the home is relatively large at this time, there will be some water droplets outside the machine. At this time, the wind of the machine can be adjusted to medium and high grade, so that the problem of dripping water can be solved.

You see if there is a solution to your problem, if you don't understand, I will continue to analyze it for you, if you have any questions, just say Oh, I will do my best to answer for you

1. The air supply speed is low.

2. The doors and windows are not closed, and the humidity inside the room is high.

3. The air supply temperature is too low.

4. The return air filter is blocked, and water accumulates in the water tray. Second, the solution.

1. Check whether the equipment has smooth air supply, 2. Increase the air speed and volume of air supply.

3. Adjust the air supply temperature of Sen Zhenqing (adjust the air supply temperature according to humidity).

4. Close the windows.

Regarding how to deal with the condensation dripping water at the air outlet, the suggestions are as follows:

1.The use of ABS material tuyere, wooden tuyere, etc., the tuyere front lifting condensation is generally too large indoor humidity, can appropriately increase the air supply temperature, the new ABS tuyere can effectively prevent the problem of condensation.

2.**Pay attention to the doors and windows of the air-conditioned room and close them tightly, so as not to let the hot and humid air from the outside penetrate into the room. Since the air conditioner itself has a certain dehumidification capacity, as the air conditioner operates, the humidity in the air in the room will gradually decrease, and the condensation will gradually decrease until it no longer condenses.

3.Choose a larger size tuyere, or adjust the wind speed to a lower point, and you can plant some anti-condensation things on the tuyere, such as a sponge.

4.When the air conditioner is just started, the temperature can be set to 26°-28°, and then adjusted to the desired temperature after a period of time.

5.If it is a louver tuyere, you can adjust the blade angle of the edge to produce a large turbulence at the outlet, and increase the induced wind at the edge, which will also help to solve the problem of condensation.

As soon as the air conditioner is turned on, the air outlet has been dripping, it should be a drain pipe problem, check it first.

The drip of the internal machine generally has the following possibilities:

1. If the internal machine is not properly installed, usually the internal machine should be installed horizontally or tilted towards the condensate drain outlet. If it is tilted in the opposite direction, it will cause the condensate to overflow and drip, which can be solved by adjusting the tilt angle.

2. The condensate pipe is blocked, resulting in the condensate water cannot be discharged and the overflow phenomenon occurs. It can be cleaned and dredged to solve the problem.

3. The fan is faulty or the filter screen is blocked, resulting in the cold energy cannot be taken away, resulting in condensation (or even freezing) in the evaporator, which usually has a small air volume in the internal machine. If it is a filter problem, you can try cleaning the filter; If it is a problem with the fan, you need to find a professional to repair it.

4. The set temperature is too low, which makes a large amount of water condense, resulting in dripping. Try to increase the temperature (according to national regulations, the temperature of the indoor air conditioner should not be higher than 26 degrees).

5. The last possibility is that the air conditioner lacks fluoride. Because of long-term use, the fluorine in the machine leaks out, and the internal pressure drops. As the evaporation pressure decreases, the evaporation temperature decreases.

There is a large amount of condensation (or even frost) in the indoor unit, and this situation needs to be solved by finding a refrigeration company to come and add some potion.

The air outlet of the air conditioner is always dripping, teach you three tricks to get it!

That is, the workload of your home's air conditioner is too much.

The filter is too dirty and the dust is blocked, so just remove it, wash it and put it on.

If you want to solve it yourself, what else do you need the master to do?

It's very simple to call someone who repairs the air conditioner to fix that, and you don't need to rmb