What does the wheat harvester feed amount mean

The wheat harvester feed amount refers to the thickness of the crop when the harvester passes through the field during work, and the continuous harvest amount, if exceeded, it may be blocked. The harvester recommends Zoomlion Harvesting 4LZ-9L self-propelled wheeled grain combine harvester.

The 2022 Zoomlion Harvesting 4LZ-9L self-propelled full-feed grain combine harvester adopts the threshing and separation technology of tangential flow + longitudinal axial flow drum, with strong threshing capacity and complete material separation; The whole machine is compact in structure, practical and beautiful, and is widely suitable for efficient harvesting of all regions, all times and all crops. The cutting flow + longitudinal axial flow threshing system is adopted to increase and lengthen the longitudinal axial flow drum, and the drum can be adjusted in three gears; The harvesting efficiency is high, the harvesting speed is fast, and one machine is multi-purpose, and wheat, rice, and millet are harvested at the same time. Different crops such as sorghum, corn kernels, soybeans, etc.

If you want to know more about harvesters, it is recommended to consult Zhengzhou Zoomlion. Zhengzhou Zoomlion is a combine harvester manufacturing company integrating product research and development, parts production, machine assembly and sales service. The company's main products are:

Grain combine harvester, peanut harvester, corn harvester, soybean harvester, silage machine, straw baler and other agricultural harvesting machinery. The company adopts an advanced "OEM" operation model.

It has a complete harvester outsourcing.

Supporting system and marketing service network. The company's marketing service outlets cover more than 300 countries across the country, and there are more than 150 outsourcing and supporting parts cooperation units.

The amount of feed refers to the harvester.

When I pass through a field while working, the thickness of the crop is instantaneous and the maximum brightness of continuous harvesting is 5 catties, and it may be jammed if it is exceeded.

The combination is mainly reflected in the following mechanisms using hydraulic transmission: click to see the details 1, the transmission system, because of the harvest operation in the field, put the large resistance, hydraulic steering to make the steering wheel.

Easier time; 2, Front Harvester Technology, Hydraulic Lift, Scissor Lift can be adjusted according to the changes and undulations.

The larger the amount of feeding, the faster the harvest, and generally 5-6 kg in rural areas is fine. Such as Lovol GE50 and GE60, Valley King's.

Hello dear, generally according to the "catty seedlings and ten thousand seedlings" and then according to the basic number of scattered seedlings required per mu to calculate the sowing amount. The length of one rotation of the planter wheel, multiplied by the width of the planter, is the amount of seeds per square meter. The old method is to calculate 10,000 seedlings according to 1 kg of seeds, according to the target yield.

According to the number of wheat plants per mu sown by machine, the number of plants per mu is calculated, the number of plants per square meter is calculated, the circumference of the walking wheel of the seeder is measured, the sowing area of ten circles is measured, the area is multiplied by the number of plants per square meter, divided by the number of rows, that is, the number of seeds under the ten circles of a single row, and then the seeder is suspended, bagged under the seed tube, the walking wheel is turned ten times, the groove wheel is adjusted according to the amount of seeds, and the reasonable number of grains is repeatedly adjusted. If you use a thousand-grain weight, it is simpler to weigh the weight without counting the number of grains. Hope it helps.

1. The half-fed combine harvester meets the agronomic requirements and is conducive to the protection of the environment. Semi-fed combine harvesting hole machine, to adapt to the agronomic requirements of rice farming, the minimum stubble height can be controlled to 35mm, which is convenient for planting ripe crops before planting; The straw can be neatly laid in spring, which is easy to use and can be chopped and returned to the field to increase soil fertility. The full-feed harvester is not as high as this requirement in terms of stubble height.

Generally, the height of crops is between 1100-1300mm, even if the stubble can be left to 35mm, the length of the upper stem will reach about 125mm, the stem is connected end to end, and a large number of telescopic rods will be wrapped around the telescopic rod of the header drum, and the machine can not work. Then a large number of stems enter the threshing drum, greatly consume the engine power, affect the harvesting speed, so generally speaking, the stubble height of the full feeding harvester is more than 200mm, affect the next crop planting, a large number of unchopped straw, discard in the field, the current hand-dragged cultivator can not bury it in the soil, and most of the farmers set fire to it, that is, it affects the environment, and wastes resources.

Summary. Hello dear, the half-fed harvester harvests wheat very well. The half-feed harvester has high operating efficiency, low fuel consumption and energy saving.

Hello dear, the half-fed harvester harvests wheat very well. The half-feed harvester has high operating efficiency, low fuel consumption and energy saving.

However, due to the special weeding mechanism of the semi-feeding machine, it has certain requirements for the height of harvesting crops, and the loss rate is relatively high when harvesting wheat, especially when the height of wheat is not neat and the wheat ear drop is large, the low wheat ear will not enter the threshing bin, and it will be lost from the trembling wax and building the service hole. For example, due to the small height difference of rice, the loss rate is not high, and the half-feed harvester was originally developed for the old rice.

Therefore, when harvesting, you should pay attention to how to use it.

Hello, landlord:

According to the classification of feeding methods, combine harvesters can be divided into full feed and half feed type.

A full-feed combine harvester is a combine harvester in which all the grain cut from the header goes into the drum for threshing. Most combine harvesters that harvest wheat crops use this feeding method. Its disadvantages: when the stubble is sluggish, the Yangtze River is incomplete in stalks, and the power consumption is large.

Semi-feed combine harvester refers to a combine harvester in which the crop cut by the header only enters the threshing drum with only the head of the ear into the threshing drum. This model maintains the integrity of the stalk and reduces power consumption for threshing and cleaning. At present, combine harvesters with this feeding method are mostly used in the southern rice producing areas.

However, the conveying stalk transmission mechanism is complex and the manufacturing cost is high.

Harvester feed volume 7 kg"This means that the harvester can handle and feed up to 7 kg of material or crops per run. This indicator is usually used to evaluate the efficiency and productivity of the harvester.

The amount of feed a harvester is how much material or crops it is able to feed into a handling unit or collector in a single run. The size of this indicator will be affected by a variety of factors, including the design of the harvester's bench, mechanical structure, the size and performance of the cutter, the density of the material, and so on.

The size of the feed amount usually varies depending on the specific crop or material. Therefore, when evaluating the performance and efficiency of a harvester, the feed rate is an important indicator that can help the farmer or operator understand the processing capacity of the harvester and plan and adjust it in production.

In a specific context, when referring to harvester feed volume, it is also necessary to understand whether there are other relevant specifications or conditions, such as time units, processing speeds, etc., in order to understand and explain the meaning of this indicator more fully.

Harvester feed volume of 7 kg refers to the input of 7 kg of crop to the harvester at a time when harvesting crops.

This indicator is used to control the efficiency of the harvester and ensure the quality of the crop. If the amount of feed is too small, the efficiency of the harvester will decrease, wasting time and energy; If the amount is too much, it may affect the quality of the crop and lose the income of the farmer. Therefore, the right amount of feed can improve the efficiency of the harvester and the quality of the crop.

In order to ensure the accuracy and stability of the feed rate, some modern harvesters are equipped with load cells and intelligent control systems, which can automatically adjust the feed amount according to the nature of the crop and the working condition of the harvester.

If the farmer is using an old-fashioned harvester, it is recommended to pay attention to whether the feeding amount is too much or too little when operating to ensure the harvesting efficiency and crop quality.

In conclusion, the harvester feeding amount of 7 kg is an effective control method that can improve harvesting efficiency and crop quality.

The harvester feed volume of 7 metric pounds" means that the harvester can handle 7 kg of fiber bend crops per second when working. This metric is often used to measure the efficiency and productivity of a harvester, and can also be used to evaluate the difference in performance between different harvester brands and models.

Specifically, the amount of feed a harvester with a smirk depends on a variety of factors, including the variety of crops, the density of crops, the blades and feeding devices of the harvester, and more. In practice, harvester operators need to adjust to crop conditions and machine performance to achieve optimal efficiency and harvest quality.

In short, "7 kg of harvester feeding" is an important technical indicator, for farmers and harvester manufacturers, understanding and mastering this indicator can help them better select, use and maintain harvester equipment.

Harvester feed of 7 kg means that the harvester is able to handle and harvest a hail crop weight of 7 kg per second. In the actual operation, the efficiency and feeding amount of the harvester will be affected by a variety of factors, such as the type, density, humidity and so on of the lead crops. As a result, the amount of feed to the harvester may vary.

Understanding and grasping the amount of harvester feeding can help farmers or agricultural workers better use and adjust the working status of harvesters, and improve harvesting efficiency and harvesting quality.