Is the Baodean lock cylinder good, and the Baodean lock cylinder can only be removed on the door

Baodean lock is also known as semi-circular lock, the lock is developed in 2001 by Baodean lock factory, it is converted from the general motors electric fire lock, the shrapnel is replaced by marbles, and by the combination of seven marbles (after 2003 changed to eight marbles), each marble has three different shades of gaps, supplemented by a square steel ingot or steel sheet inserted in the middle, that is, commonly known as three false marbles, because the general locksmith can only use a single hook to dial the mother beads one by one, so it is difficult to dial the false mouth to a straight line, Therefore, the anti-theft effect of Baodean lock is obvious, and many famous anti-theft door factories use Baodean (semi-circular lock), which sells well all over the world.

Harbin Sesame Open Door Intelligent Unlocking Co., Ltd. sells Baodean lock series products, including Baodean lock cylinder, Baodean lock body, Baodean handle, Baodean lock guard, etc.

Summary. Hello, the removal method of the lock cylinder of the Baodean anti-theft door is as follows:

The first tools used are rivet guns, riveting guns, Phillips screwdrivers, vises, needle-nose pliers, tweezers, flat chisels, and assorted files.

The steps to remove the lock cylinder of the anti-theft door are as follows:

1. Use a flat-mouth chisel to open the rivets of the inner panel;

2. Open the three connecting shafts of the linkage mechanism respectively (three spring bolts, three gaskets); Be careful not to lose parts.

3. Disassemble the three screws of the fixed linkage mechanism (triangular arrangement, of which the lower two are inside); Take out the entire linkage mechanism;

4. Take out the outer panel;

5. Remove the lock cylinder: remove the bayonet spring, remove the control lever, and unscrew the two screws;

6. Reloading the lock cylinder: reverse operation of step 5;

7. Reinstall the outer panel: if the core hole of the outer panel is small, the key cannot pass through, and the hole needs to be reamed (the original magnetic key is much smaller than the diameter of the tooth key);

8. a backloading linkage mechanism;

9. Debugging; You may find that the cylinder lever protrudes a lot, resulting in a whole bunch of inexplicable malfunctions. The linkage can be loosened appropriately.

The lock cylinder of Baodean can only be removed on the door.

Hello dear! I've seen your question and I'm trying to sort out the answer, and I'll get back to you in five minutes, so please wait a minute

Kiss! Hello, happy to answer for you! I hope to help you talk about it! If you want to remove the lock on the door, you can open it with the key.

If you are satisfied with my service, please give me a review.

Hello, the removal method of the lock cylinder of the Baodean anti-theft door is as follows:The first tools used are rivet guns, riveting guns, Phillips screwdrivers, vises, needle-nose pliers, tweezers, flat chisels, and assorted files. The steps to remove the lock cylinder of the anti-theft door are as follows:

1. Use a flat-mouth chisel to open the rivets of the inner panel; 2. Open the three connecting shafts of the linkage mechanism respectively (three spring bolts, three gaskets); Note: No Kai stuffy parts do not lose. 3. Disassemble and fix the three screws of the linkage bending mechanism (triangular arrangement, of which the lower two are inside); Take out the entire linkage mechanism; 4. Take out the outer panel; 5. Remove the lock cylinder: remove the bayonet spring, remove the control lever, and unscrew the two screws; 6. Reinstall the lock cylinder:

Reverse operation of step 5; 7. Reinstall the outer panel: if the core hole of the outer panel is small, the key cannot pass through, and the hole needs to be reamed (the original magnetic key is much smaller than the diameter of the tooth key); 8. a backloading linkage mechanism; 9. Debugging; You may find that the lock cylinder lever protrudes a lot, resulting in a lot of inexplicable old grandchild failures. The linkage can be loosened appropriately.

AB lock cylinder refers to the key divided into A key and B key (A key for decoration workers, B key for their own family). It doesn't refer to anti-theft performance.

Prudentian's lock cylinders are basically AB keys. To see the anti-theft performance, you have to look at the pattern of the key and the style of the keyhole.

The best anti-theft is the super B-level lock cylinder. The King Kong four-dimensional lock cylinder in Proudan is super B.

How to tell which ones are A-level, B-level, and super B-level see the figure below:

Look at the logo on the key, if it doesn't work, you can remove the lock cylinder, and the lock cylinder has a steel stamp. Then compare the ** of the Baodean manufacturer to know whether it is true or false.

Tell me what brand of door you use? The Star Moon God, the beauty heart is all used by Bao De'an, and the key should be able to be seen. It's hard to say if you change things later, because there are fake ones now.

Now the common brands of locks are Baodean, Wang Li, Wanjia, security, and many others are not listed.

Is Prudentian good? Buyang new multi-star moon gods are all used by Bao De'an. . . Don't look at it.

There is a steel seal on the lock body, you can remove it if you don't worry, and there is also a logo on the key