How to set Sony mobile phone to automatically turn on the screen without pressing buttons when playi

Hello, let's first compare the configurations of the two phones:

Samsung S4 Reviews:

Advantages: 1. The appearance is relatively beautiful, not perfect;

The core CPU, 2Gram (the minimum requirement after the Android system), the graphics card is strong, and the configuration is strong.

0 inches (maximum acceptable limit);

p is clearly displayed;

Disadvantages: 1. The most important thing is that it is too high and cost-effective;

2. The shell is plastic, the texture is poor, and the weight of 130g is light;

3. The battery capacity of 2600 is too little, and the Samsung battery is not resistant;

4. There are too few innovative experiences and low practicability;

5. Android system optimization is not good, and it has been promoting higher hardware configuration and low security.

Sony Z2 Reviews:

Advantages: The perfect upgraded version, powerful configuration;

2.The appearance design is exquisite, and the craftsmanship is exquisite;

3.The camera has high pixels and good imaging results.

Cons: 1The battery capacity is small and the battery life is poor;

2.Low cost performance, too high.

Summary: These two mobile phones are not products of the same period, Samsung S4 is the flagship machine in 2013, and now**It is reduced to the minimum, and the cost performance is definitely higher,**The difference is thousands. The Sony Z2 has a more powerful configuration, a better camera and exterior design than the S4, and the Z2 still has a lot of room for price reduction.

Comparing these two phones, I personally prefer the Sony Z2.

Find the display in the phone settings and it's OK.

My l36h does this. Set --- display --- sleep, the longest time in this is half an hour, so as to ensure that the phone will not lock the screen for half an hour.

Some mobile phones can, in the mobile phone settings, the bright screen setting, you can set it, there is no bright screen setting, you can't, you can achieve it through the bright screen software, but some mobile phones can't.

On some mobile phones, you can open the screen by tapping the screen twice and look for it in the settings.

The mobile phone is set to raise your hand to turn on the screen, and you can turn on the screen without pressing the power button, which will be much more convenient to see the time, and bring you the method of setting. First of all, we click to open the mobile phone desktop of Huawei Enjoy MAX, click to enter [Settings], find and click to open [Smart Assist] on the settings page, click to enter [Gesture Operation] after entering the Smart Assistance page, click to open [Pick up phone] under the gesture operation menu, and finally we click to turn on the switch of [Lift up the bright screen] to turn on this function, and pick up the phone when the phone screen is black to turn on the screen.

Here's how:

1. Under the main menu interface, enter Settings;

3. Select the button;

4. Duration of the button light: Select the appropriate time to turn on the button light.

1. Go to the "General" settings of your iPhone6.

2. Find the "Accessibility" settings, and then you can find the "AssistiveTouch Settings" in the accessibility settings, which is the gesture function of the iPhone6 dot, which is off by default, and we can turn it on.

3. After entering the assistivetouch gesture setting for the first time, we will first turn on the function.

It depends on your model, iPhone6 and above can be lifted to wake up Setting method: Settings Display & Brightness Lift to wake up.

You may not have set up automatic screen off, so you can set it up.

The purpose of turning off the screen of the mobile phone is to save the power of the mobile phone, reduce the wear and tear of the mobile phone, protect the screen, prolong the service life of the mobile phone, and make it more humane.

Setup steps. 1.Find Settings and click Enter.

2.Find the lock screen password fingerprint and click to enter.

3.Find the auto-lock screen.

4.Click Set time.

Here's how:

1. Turn on your phone, find "Settings" and click to enter the settings page.

2. In the settings page, as shown below, click "Display & Brightness" indicated by the arrow.

3. On the Display & Brightness page, click the "Auto Screen" option to enter the settings page.

4. If you want to turn off the screen quickly, click to select 15 seconds.

5. After the selection is completed, as shown in the figure below, the system will automatically return to the previous page, and the phone will automatically turn off the screen after 15 seconds without operation.

Hello, please go to the phone settings to display the backlight time, adjust it to 30 seconds or 15 seconds, in the case of no operation of the phone, the screen will automatically turn off after 15 or 30 seconds. You try it.

If you have any other questions, you can enter the OPPO enterprise platform to ask customer service questions!

If it's vivoy67, some of them don't have key settings in the display and brightness, and then click on other settings to find automatic breath-holding.

1.First of all, turn on the mobile phone QQ, here is a reminder to friends, if QQ is not the latest version, there is no need to set it up like this.

2.After entering QQ, swipe right on the screen, and a function main menu will be displayed on the left, and click the [Settings] command at the bottom.

3.Next, in the interface that appears, click to select the [Message Notification] item to enter the message settings screen.

4.At this time, when you see the [lock screen display message pop-up box] option turned on, click the button on the right to switch to the gray off state.

5.You can also click the button on the right side of [Notification Display Message Content] above to turn off this message notification function.

6.After the setting is completed, after the phone enters the lock screen state, QQ will not pop up the received messages by itself.

Scenario 1: You can set the terminal to automatically disconnect the mobile data WLAN network connection when the screen is locked. WLAN Settings:

Go to [Settings] - [Wi-Fi] - [Advanced Settings] -[Keep Wi-Fi Connection in Hibernation State] switch off. Mobile data: Go to [Settings] - [Mobile Network] - [Always connect to data] switch off.

Scenario 2: You can set the lock screen notification permissions for specific apps through the settings menu or the [Notification Management] function of the built-in butler category.

QQ Open Settings - Message Notification - Lock Screen Display Message Pop-up Box Closed.

The phone's built-in system settings - notifications and status bar - lock screen, turn on the screen for new notifications Turn off [The phone settings may be different, my Meizu settings are like this].

Set --- notifications--- lock screen notifications --- don't show notifications.

Set up Message Management to turn off the pop-up message when the screen is locked.

I want to make it turn on the screen, but I tried it and it didn't work.

Wouldn't it be nice if you turned off the background, if there is no message, it won't be like this.

Open QQ, dial to the right, and press the settings below to set up. Are I satisfied with my answer?

In the settings, there will be a lock screen or something.

Apple mobile phone can light up the screen without buttonsRecommended method:

Use another phone to dial the number of the iPhone.

Use another phone to text the number of the iPhone.

Plug in the data cable to charge.

Set an alarm. iPhone is a smartphone developed by Apple, which is equipped with the iOS operating system developed by Apple. The first iPhone was released on January 9, 2007 by former Apple CEO Steve Jobs, and was officially released on June 29 of the same year. The seventh-generation iPhone 5S and iPhone 5C were released on September 10, 2013, and officially went on sale on September 20 of the same year.

The eighth-generation iPhone 6 and iPhone 6 Plus were released on September 10, 2014, and the sales date in Chinese mainland is set for October 17.

On September 10, 2015, iPhone6S iPhone6S Plus was released, which will be accepted for reservation at 3 pm on September 12, 2015, and officially launched on the 25th.

Then you can change the settings of the phone in the settings, and change it to the kind of screen that turns on when you pick up the phone, so that you can achieve the purpose of lighting up the screen without pressing the buttons. It's in the settings of the Apple phone.,General.,And then there's a setting in it that monitors the option to turn on the screen when you lift the screen.。

You mean double tap to wake up.,That one wants to flash the machine.,You can try to have a light unlock.,It's okay.,No root.

It's usually both.