Start studying now, and pass the exam as a construction and cost engineer in a year, is it possible?

It is recommended that you choose to take one of them, otherwise it will be a bit stressful to prepare for the exam

A cost engineer four-year rolling refers to a cost engineer examination for four years for an examination cycle, candidates' results are valid in an examination cycle, for example, candidates in the first year of the examination only pass 2, then in the next three years through the other two examination subjects can obtain a cost engineer professional qualification certificate, but if in an examination cycle (4 consecutive years), did not pass all the subject examinations, the previous test results are invalid. Personnel who have obtained a professional vocational qualification certificate for cost engineers and register for other professional subject examinations can be exempted from basic subjects. After passing the examination, the corresponding professional examination certificate uniformly printed by the human resources and social security department will be issued.

This certificate serves as the basis for adding the category of practicing profession at the time of registration. [Click to inquire about the application conditions for cost engineers].

If you want to know more details about the cost engineer, it is recommended to consult Zhong'an Jianpei, which focuses on the important and difficult content and exercises of the course, and uses micro-courses for in-depth analysis to help students use fragmented time to overcome problems and maximize learning efficiency. In view of the fact that cases are the most difficult subjects in the exam, in order to greatly improve students' ability to answer questions, special case training courses are set up to help students check and fill in the gaps and quickly improve their answering ability. According to the important and difficult content and exercises of the course, the in-depth analysis of micro-courses is used to help students use fragmented time to overcome problems and maximize learning efficiency.

Click here to access the cost engineer training and learning materials

The first-level cost engineer needs to meet certain working years and educational requirements.

The results of the first-class cost engineer examination are managed on a rolling basis for a period of 4 years, and all four examinations are passed in 4 consecutive examination years.

The results of the professional qualification examination for a cost engineer shall be implemented for a period of 4 years and the rolling management method shall be carried out in 4 consecutive examination years to obtain the professional qualification certificate of a cost engineer. Exemption from the examination results of the basic subjects is valid for 2 years.

According to the "Cost Engineer Professional Qualification Examination Implementation Measures" and "Cost Engineer Professional Qualification System Regulations", it can be seen that the results of the first-level cost engineer examination are managed on a rolling basis, and the personnel who participate in the 4 subject examinations (the level is the whole subject) must pass all the examination subjects in 4 consecutive examination years.

Those who take the 2 subject examinations (the level is exempt from 2 subjects) and meet the basic subjects of exemption must pass the corresponding examination subjects within 2 consecutive examination years in order to obtain the qualification certificate.

Those who participate in the additional professional examination can be exempted from the basic subjects and pass the corresponding examination subjects within two consecutive examination years in order to obtain the corresponding professional examination certificate.

The rolling management of the results of a cost engineer refers to all the test subjects in the effective cycle of the results, that is, qualified, do not need to pass all the examination subjects within one year, and the rolling management cycle of the results of a cost engineer is different according to the different examination levels. The first-level cost engineer examination level is divided into all subjects and two exemptions.

The rolling management cycle of the results of all subjects is 4 years, and candidates only need to pass 4 subjects in 4 consecutive examination years to pass. The rolling management period of the results of the two exemptions is 2 years, and candidates only need to pass 4 subjects in 2 consecutive examination years to pass.

Those who take the 4 subject examinations (the level is all subjects) must pass the examination subjects within 4 consecutive examination years; Those who take the examination of 2 subjects (the level is exempted from 2 subjects) must pass the examination subjects within 2 examination years; If you register for the examination of other professional subjects (the level is an additional major), you only need to take the professional subjects and pass them within 2 examination years to obtain the corresponding professional examination certificate.

The first-class cost engineer professional qualification examination is divided into 4 half-days. The examination time of "Construction Project Cost Management", "Construction Engineering Technology and Measurement" and "Construction Project Valuation" are all hours, and the examination time of "Construction Project Cost Case Analysis" is 4 hours.

Candidates who meet the registration conditions for the cost engineer professional qualification examination shall bring relevant documents and materials to the designated place for registration qualification review according to the regulations. When registering, the local human resources and social security departments, together with the relevant industry authorities, will review the qualifications of the applicants. After passing the examination, the admission ticket will be issued, and the candidates will take the examination on the specified date, time and place with the admission ticket and valid certificates.

Share the candidate's experience of successfully passing the cost engineer and first-class constructor in one year.

Here are a few personal feelings:

We must follow the plan, (we are all adults, socialization is essential, we must set aside time for maneuver, otherwise the plan will definitely not be completed) to manage the PDCA inside, which is also useful for us to learn, start to read, initially set a public course per month, and practice the rest of the time. During the implementation process, the public class is usually completed in about 20 days, and the practical time required is much longer than I imagined.

Usually the wrong questions should be collected, and if you look at the wrong question set every once in a while, there will often be mistakes 3 or 4 times or mistakes, so you must pay attention to it.

Regulations: In addition to memorization, it is also necessary to understand the jurisprudence. After understanding, it is not difficult to remember, the most obvious one is who is at fault and who is responsible.

Whoever defaults, bears. It's best to do exercises to consolidate every chapter you read. Practice with the 100 chapters of the exam and remember to collect the mistakes.

Take a test after one course, and do one test paper a week to keep it familiar, otherwise, after the second book is finished, the first book should also be forgotten.

Regulations: In addition to memorization, it is also necessary to understand the jurisprudence. After understanding, it is not difficult to remember, the most obvious one is who is at fault and who is responsible.

Whoever defaults, bears. It's best to do exercises to consolidate every chapter you read. Practice with the 100 chapters of the exam and remember to collect the mistakes.

Take a test after one course, and do one test paper a week to keep it familiar, otherwise, after the second book is finished, the first book should also be forgotten.

Economy: Listen to more lectures, as long as you understand the first chapter, it is very simple, as long as you remember one formula, everything else can be deduced. As with the regulations, do a set of test questions every week, otherwise the formula will be forgotten quickly.

Practice: It takes the most effort and is also the most difficult. The practice is more complicated, and the questions must be done more, and the real questions over the years have been done.

The cost learning time is too short, 20 days to get a course, and from the end of the management, every day to see the case.

Compared with the engineering economy of a construction, the valuation is more difficult, and the knowledge points of listening to measurement are too fragmented, and grasping the last chapter is half the success.

The case, because it is unpretentious, listens to Zhu Junwen, the main reason is that he will put it when he lectures.

Betting on the topic, betting on the topic is not omnipotent, it can only be icing on the cake, without a good foundation, you can't get by.

Generally speaking, if there is a foundation, half a year for a first-level constructor and half a year for a first-class cost engineer, and review for five hours a day. That's more than enough time, and I personally think it's pretty much enough. Five hours, only five hours a day, insist on a year, half a year to see the builder and half a year to see the cost engineer is completely enough.

If you plan to take the exam next year, there is still a year and a half to study carefully, and there is a lot of hope. If it's too late for the exam this year, it would be nice to pass one.

You think too much, you can live one a year, you are both NB or two.

The Level 1 Cost Engineer exam requires candidates to pass all subjects within four years to obtain the Level 1 Cost Engineer certificate.

Knowledge Expansion: Round Liquid Shirt

The first-level cost engineer applies for the orange cavity conditions

1. Have a college degree (or higher vocational education) in engineering cost, and have been engaged in engineering cost and engineering management business for 4 years. He has a college degree (or higher vocational education) in civil engineering, water conservancy, equipment manufacturing, transportation, electronic information, finance and commerce, and has been engaged in engineering cost and engineering management business for 5 years.

2. Have a bachelor's degree or degree in engineering management with engineering cost and pass the professional evaluation (certification) of engineering education, and have been engaged in engineering cost and engineering management business for 3 years; Have a bachelor's degree or degree in engineering, management and economics, and have been engaged in engineering cost and engineering management business for 4 years.

3. Have a master's degree or a second bachelor's degree in engineering, management and economics, and have been engaged in engineering cost and engineering management for more than 2 years.

4. Doctoral degree in engineering, management and economics.

5. Personnel with corresponding academic qualifications or degrees in other majors shall be engaged in engineering cost and engineering management business for 1 year.

6. If you have one of the following conditions, you can be exempted from the basic subjects for participating in the first-level cost engineer examination

1) has obtained the highway engineering cost personnel qualification certificate (grade A).

2) has obtained the qualification certificate of water transportation engineering cost engineer.

3) has obtained the qualification certificate of water conservancy engineering cost engineer.

The 2021 first-class cost engineer exam will be held in October, and the registration time will be around mid-August, which is over! If you want to take the first-level cost engineer exam, you can only wait for 2022!

Registration conditions for the first-level cost engineer examination:

A) who abide by the Constitution of the People's Republic of China, laws and regulations, with good professional quality and moral character, with one of the following conditions, can apply to participate in the professional qualification examination of a cost engineer:

1. Have a college degree (or higher vocational education) in engineering cost, and have been engaged in engineering cost business for 5 years; He has a college degree (or higher vocational education) in civil engineering, water conservancy, equipment manufacturing, transportation, electronic information, finance and commerce, and has been engaged in engineering cost business for 6 years.

2. Have a bachelor's degree or degree in engineering management and engineering cost that has passed the professional evaluation (certification) of engineering education, and have been engaged in engineering cost business for 4 years; Have a bachelor's degree or degree in engineering, management and economics, and have been engaged in engineering cost business for 5 years.

3. Have a master's degree or a second bachelor's degree in engineering, management and economics, and have been engaged in engineering cost business for 3 years.

4. Have a doctorate degree in engineering, management and economics, and have been engaged in engineering cost business for 1 year.

5. Personnel with corresponding academic qualifications or degrees in other majors shall be engaged in engineering cost business for 1 year.

The 2021 first-class cost engineer exam will be held in October. I can take the exam.

You can take the test, but due to epidemic prevention and control, some provinces have suspended the test.

Suspension provinces: Ningxia, Guizhou, Gansu, Inner Mongolia, Rizhao, Shandong.

This should be OK, there is no notice of cancellation of the exam at present, and the admission ticket can already be printed.

At present, the new local sailing new crown epidemic cases in the country have not shown an explosive growth trend, and my country has rich experience in epidemic prevention and control, and all localities should be able to quickly and effectively control the development of the epidemic. At the same time, judging from the latest epidemic prevention and control instructions issued by various regions, among them, Hunan only requires candidates with a history of travel and residence in relevant risk areas not to go to the test center to take the test. At present, no region has issued a notice to cancel the 2021 first-level cost Daxian engineer examinationHowever, during the period before the exam, everyone must strictly abide by the requirements of each region and do a good job in epidemic prevention and control.

I can't take the first-class constructor exam this year, so let's wait for next year.

Beijing's 2021 first-level cost Dongbei town exam time is on October 30-31, which has been successfully ended, and individual provinces have suspended the exam, but just received the news that the Beijing first-level fire protection exam has been suspended.

You can also take the test, but it seems that there is only one chance to register once a year, and you can go to the local area to learn about it

1. The cost engineer exam can be applied for one exam a year, but it is necessary to ensure that it can be passed within one year, and if the exam results are invalid if they do not pass, they need to be retaken. There are four subjects in the first-level cost engineer examination, and the examination results are implemented on a rolling management method for a cycle of 4 years.

2. The subjects of the first-level cost engineer qualification examination are "Construction Project Valuation", "Construction Project Cost Case Analysis", "Construction Project Cost Management" and "Construction Engineering Technology and Measurement" (this subject is divided into four professional categories: civil engineering and construction engineering, installation engineering, transportation engineering and water conservancy engineering, choose one of them).

3. Examination results are managed on a rolling basis. Those who take the 4 subject examinations (the level is all subjects) must pass all the subjects in 4 consecutive examination years, and those who take the 2 subject examinations (the level is exempt from 2 subjects) must pass the corresponding examination subjects in 2 consecutive examination years in order to obtain the qualification certificate.

Personnel who have obtained a professional vocational qualification certificate for a cost engineer and register for the examination of other professional subjects (the level is an additional specialty) must pass the corresponding examination subjects in 2 consecutive examination years in order to obtain the corresponding professional examination certificate.