-
The reasons for not being able to enter the system and being able to enter safe mode are complex, but they are often caused by the installation of conflicting software or drivers, as well as malicious programs. You can press the F8 key at boot time, and when the startup list appears, select the [Last Correct Configuration] method to start or enter safe mode, uninstall the recently installed suspected program, or perform malicious program detection and killing, and try to solve it!
Being able to enter safe mode means that the basic system is still normal. This situation only indicates that there are less secure items in your startup items. After entering the safe mode, start--run, enter msconfig to confirm, and remove the checkmark before the unfamiliar items in the startup.
Or simply leave only the antivirus firewall and the input method startup items (CTFMON). After restarting, see if you can enter normal mode.
To enter safe mode, 1) Close all programs. 2) On the Windows taskbar, click Start - Run. 3) In the Open box, type the following:
msconfig, 4) click OK. 5) Open the "System Configuration Utility", in the "System Configuration Utility" tab, uncheck and click "OK". 7) Close all programs and restart your computer.
Use the system disk to repair the installation
Methods and steps to repair the installation: The first method: 1) Click on the "Start" menu and click "Run" 2) Enter cmd Enter 3) Enter the command sfc scannow4) Insert the system disc The system will automatically compare the system files in the hard disk with the files in the system disk and repair them.
-
How to enter safe mode in win7.
-
1. Win7 can enter safe mode, but it can't start normally due to the following three reasons:
1. Virus, after being infected by the virus, it will often cause the installation to fail, or you can only enter the safe mode, kill the virus first, and then reinstall the system.
2. The quality of hardware such as memory, graphics card, and hard disk is not good, and it is more likely to cause problems after overclocking. At this time, don't overclock, jump back and say, if it doesn't work, then replace the hardware in turn.
3. Installing some incompatible or problematic drivers, such as installing some graphics card or motherboard drivers that are not doing well, will often cause boot failure.
It may be that there is a problem with your system disk, try another one.
Second, win7 can enter the safe mode, but can not start normally solution:
1. Press F8 immediately after booting to the advanced option appears in the hand, select "The latest correct configuration" Enter to repair, and press F8 to enter the safe mode to restore the system or reinstall the system.
If such a problem occurs due to software conflicts, inappropriate drivers, or system problems, you can restore the system in safe mode.
2. Reinstall the operating system, do not install software, patches, drivers, etc.
3. Hardware: whether there is a problem with the hard disk, memory, etc., whether the temperature of the CPU and other hardware is high, if it is caused by hardware problems, it is recommended to overhaul it.
-
1. Press F8 to enter the safe mode after booting up, and select the latest correct configuration.
2. Reinstall the system if it is invalid.
Introduction: Computer (computer), commonly known as computer, is an electronic computer used for high-speed calculation, which can perform numerical calculations, logical calculations, and also has the function of storage and memory. It is a modern intelligent electronic device that can operate according to the program and process massive amounts of data automatically and at high speed.
A computer that consists of a hardware system and a software system without any software installed is called bare metal. It can be divided into five categories: supercomputers, industrial control computers, network computers, personal computers, and embedded computers, and the more advanced computers include biological computers, photonic computers, quantum computers, etc.
Main features: 1. Fast operation speed.
2. High calculation accuracy.
3. Have the ability to make logical judgments.
4. It has the ability of automatic control.
The panacea is to reinstall the system.
Is it caused by hardware overheating? Try to clean the ash and add some thermal grease to the graphics card and CPU.
Simple,Write a driver wizard to update the necessary driver to try.,The driver on the disc is no longer good.,You can try.,But it's not guaranteed.,Good luck!
Click on "Control Panel" - "System & Security" - "Check WindOS Index" - "Adjust Visual Effects", and then check the box in front of "Show translucent selection rectangle". Just in case, to avoid the problem of not being able to use other similar software in the future, it is recommended that you do not select "Custom" in the dialog box that comes out after clicking "Adjust Visual Effects", but "Best Appearance", so that Win7 will also look better. >>>More
Method steps.
On the desktop of the computer, click [Start], and in the right sidebar, find [Control Panel], as shown in the following figure: >>>More