What should I do if my internet speed is pulled by someone, how to solve the problem that my compute

If your home and others are sharing the Internet, their home occupies a little more, your home will be less, and your home will occupy a little more bandwidth, and his home will naturally have a slower network speed, so they turn off the computer, and your network speed will be faster.

Under normal circumstances, on the web page, play a game, chat about QQ, etc., 2-3 home 1M bandwidth is no problem, unless someone Thunderbolt BT and other P2P** or QQLilive (over-occupied bandwidth) to watch movies, according to the analysis of the situation you said, there must be a P2P occupied bandwidth problem, the solution is as follows:

1. Call ** to contact Telecom, apply for a separate bandwidth at home, and use it as you want, and no one can interfere.

2, everyone try not to use P2P software** or QQlive to watch movies, and don't use it during the peak period of the network** (such as 7 o'clock in the evening-10 o'clock) to know that there is no one at home or no Internet access, or you can turn on the computer before going to bed at night and use Thunder**, get up in the morning to harvest. You can use P2P Terminators, and of course he can use them, so you have to limit others yourself and follow the rules yourself. Otherwise, they all restrict each other, and they can't get on, and it becomes a death network.

--- same bandwidth, the speed depends on the following factors:

1.The bandwidth of the route you use to access the Internet. The trillions that people often talk about refer to it.

2.The configuration of your computer or the quality of your computer's operating system. Generally, the configuration of the computer does not affect the network speed, if the configuration is too low, too many programs or software will be affected.

3.The rate at which your data port allows. Some may limit the port rate in order for everyone to be in a timely manner. At this time, no matter how large your bandwidth and high computer configuration are, it is useless.

5.The number of users connected to the network by local nodes means that everyone is slow when they are using the network, and fast when there are few people. Generally slower from late to o'clock.

6.The computer is infected with a virus.

7.The server is overloaded.

The peak time for internet access is generally after 9 p.m. But the impact will not be great. How many computers are connected to the 4M network?

If you only have one or a few of them, but they don't have Internet access and they slow down, then you may be hacked by someone else. 10 kb may be limited, you can ** 2p2 terminator can see how many computers your router is connected to. If you see a slow internet connection, you can change your IP address, and if it is restricted, you can change your IP address to undo it.

The reason for computer maintenance is also not ruled out. In some places the resources are not very good. The peak period will be slow, or the line will be stretched for too long.

The copper wire is aging. If you can't solve it, you can call telecom directly. Any problem is generally around 100 fast.

Except for changing things)

If you don't have a wireless router, you can look for Telecom.

No, it was the telecommunications bureau.

That's because some people use the network as a judge, P2P terminator and other software to restrict, as long as you install a firewall with ARP defense, 360 and Rising firewalls have this function.

Another reason is that the landlord has made restrictions on the router.

That's the case.,Even if you use software to control.,But it's still not good.,I used to be like this.,Can't just find a good neighbor to pull a line.,But now it's good to use wireless.,You go and pull one and then ask them if they want it.,You also come to charge so that even the monthly network fee is recovered.。

The network cable that is independently pulled needs to be dialed up to go to the Internet café, and others don't know how to use your account? However, the quality of the line is not good enough to possibly, so call the personnel who install the network to check the line for you.

This one is not like **. Connect your line and you're ready to go. This is a username and password. If you don't have any wireless router installed. Something. Maybe it's the operator's problem.

Probably he installed Cyber Enforcement Officer with similar software.

You also pretend to be one, if he pretends to be a cyber law enforcement officer, and you also pretend to be, it will be invalid for you, and if you pretend that he is not pretending, you can also make him unable to access the Internet.

It's okay without software, you can:

Click Start --- run--- enter cmd--- enter a black box to enter the command.

You can enter it if you have access to the Internet.

arp -a

You're connected to the router, and there should be a line of content.

xx-xx-xx-xx-xx-xx-xx

Write down that xx-xx thing.

In the future, when you can't access the Internet, enter it in this place.

arp -a to see if the latter one is different.

If it's not the same.

Just type arp -s xx-xx-xx-xx-xx-xx-xx, where xx is what you wrote down.

If you find it troublesome, you can type arp -d in that box when you can't access the internet

Then go online, but in this case, you may still be unable to access the Internet.

Presumably, ARP spoofing is used, and you bind the gateway address statically.

It's useless, you just change the mac.

You just go straight to him and tell him that we bought it together, and that there is no speed limit. Or directly tell him that the network speed is very slow, see if he is fast, if he is fast, he will say to check what is going on with you, if he wants to say no, you will call the telecom to check.

Find the one that limits the internet speed, and turn it up a little bit.

Log in to manage and take a look.

Manage IPI don't know if the password has been changed.

Our unit is set by the network speed limit, and I still don't know what to do. I had to go to our administrator every time, and only he had the permission

You may not be able to access the Internet or some network resources. This failure is caused by the network not assigning a network address to the computer.

If it is a better route with allocated network speed, there is no way to limit it to you from the source of the route.

If it's through software to give you restrictions, you can use p2pover network scissorhands and other software to compete with him for internet speed.

That's all there is to it.

This, or learning how to set up a router, is actually very simple; Or talk to them about speed limits.

No way, unless it's a P2P terminator, but it will be discovered.

It's better to say it's open. Coming and going is not the way to go.

Does your AR firewall have any hints about ARP attacks? Is this the case 24 hours a day If so, it is the opponent's land game that limits your network speed If there is an ARP attack prompt, it is recommended that you next color shadow ARP firewall Color shadow is very strong specifically for ARP attacks You boot up and run arp -a to see if it is the MAC address of the gateway If it is not or there is more than one It is determined that it is an ARP attack You can also run arp-d and arp-s to delete the arp cache and mac binding If the land game limits your network speed, you try to enter the land game to see The username and password are default admin as long as he has not changed the password.