-
Hello, generally speaking, according to the intensity of the collision, the explosion of the airbag will also be divided into two poles, I hope mine will satisfy you, I wish you a happy car, [If you have a problem with the car, ask the car master. 4S shop professional technician, 10 minutes to solve. 】
-
How it works. Although airbags will differ in structure, their working principle is basically the same. During the driving of the car, the sensor system continuously sends speed change (or acceleration) information to the control device, and the control device (** controller) analyzes and judges this information, if the measured acceleration, speed change or other indicators exceed the predetermined value (that is, the collision really occurred), the control device sends an ignition command to the gas generator or the sensor directly controls the ignition, and the ** reaction occurs after ignition, generating N2 or releasing the compressed nitrogen in the gas storage tank to fill the collision air bag.
When the occupants are in contact with the airbag, the collision energy is absorbed through the damping of the exhaust hole on the airbag, so as to protect the occupant.
To put it bluntly, it is actually a small **,** gas burst open the airbag.
The firing of the bullet is also a principle, ** hit the primer, the primer quickly ignites the gunpowder, produces a violent **, produces a large amount of gas, the gas expands but is limited by the shell, the direction of expansion is against the warhead, and pushes the warhead forward movement, and the warhead relies on inertia to shoot out of the chamber.
The difference between airbags and bullets is that there is no warhead, and the ** gas is not limited by a hard cartridge case, but is wrapped in an air bag. As a result, the rapid expansion of the gas causes the pockets to expand, which acts as a protective effect.
In fact, airbags** are actually dangerous, but they are far less dangerous than the injuries caused by car crashes. The lesser of two evils. If you detonate the airbag alone, the airbag can knock the person into the brain**.
Intuitively, it can definitely make your nose bleed or even break a bone. But it's better than hitting your head and dying.
-
Two SRS (Auxiliary Protection System) front airbags, the driver airbag is located on the steering wheel**, the front passenger airbag is located in the dashboard, the passenger airbag is located above the passenger glove compartment, and the position where the airbag is written above the glove compartment is where the passenger airbag is located.
Airbags are a must-have passive safety feature in modern cars. In the event of a serious collision, the airbags can be deployed, which can reduce the damage to the occupants of the vehicle.
The position of the airbag distribution is relatively fixed, generally there are airbags in the steering wheel, there are airbags above the co-pilot glove box, there are airbags in the A-pillar and B-pillar interior panels, and some cars also have knee airbags.
When buying a car, you can look at the number of airbags in the car and the location of the airbags, so that you can have a general judgment on the safety performance of the vehicle.
Where there are airbags, there will be air bag markings, and there will also be a detonation port. In the event of a collision, the airbag can be deployed through the detonator.
When driving, be sure to fasten your seatbelt, otherwise the airbag will cause serious secondary injury to the occupants of the car. The airbag must be used in conjunction with the use of the seat belt in order to function, otherwise the lead will seriously injure the members of the car fluid party.
Usually do not place some accessories in the car, if it happens to be placed on the airbag detonation port, it will affect the smooth deployment of the airbag.
Photo by Q&A) Xingrui Ideal One Model Y Model X Hiphi X Leap T03 @2019
-
10th generation Civic ( check price |How many airbags are thereAuto Network: I'll answer for you.
The 10th generation Civic is affected by the angle and severity of the collision front, front and side curtain airbags. The airbag system includes:
Two SRS (Auxiliary Protection System) front airbags. The driver airbag is located on the steering wheel** and the front passenger airbag is located in the instrument panel. Both airbags are markedsrs airbag
Two side airbags, one for the driver and the other for the front passenger. The Kai airbag is located on the outer edge of the seat back. Both airbags are markedside airbag
Two side curtain airbags acting on both sides of the vehicle. The airbags are located on the roof, above the side windows. The front and rear columns are markedside curtain airbag
When the vehicle is started, the electronic control unit continuously monitors the use of various collision sensors, seat and lock sensors, airbag triggers, and seat belt tensioners. In the event of a collision, the cell will record this information.
Automatic tensioner for front seat belts.
Crash sensors that detect moderate to severe frontal or side impacts.
Indicators on the dashboard alert you that there may be a problem with the airbag system or seatbelt tensioner.
Summary: In the past, the Honda Fit was the sporty model of choice among Honda fans, but now it has become the new Honda Civic, which not only has a combative shape, but also has a good acceleration performance. The most important thing is that the Civic has more than 20,000 sales per month, which proves that it has a huge fan base including Sun Kai, which is very rare for a model that focuses on sports control.
-
Hello, it is a pleasure to serve you and provide you with the following answer: The 10th generation Civic airbag module is located under the front seats of the vehicle, it is a safety device that can release the airbag in time in the event of a collision to reduce the possibility of passenger injury. Causes of the problem:
1.The airbag module may be damaged due to prolonged exposure to moisture, preventing the airbag from releasing properly. 2.
The airbag module may be damaged due to long-term use, resulting in the airbag not being released properly. 3.The airbag module may be damaged in a car crash, preventing the airbag from releasing properly.
Workaround:1Inspect the airbag module regularly, and replace it with a new one if it is damaged.
2.The airbag module is installed in a dry environment to prevent damage to it in a humid environment. 3.
Regularly inspect the airbag module, and replace the module with a new one if it is found to be damaged. Steps:1
Open the front seats of the vehicle and inspect the airbag module for damage. 2.If damage is found, replace the module with a new one in time.
3.The new airbag module is installed in a dry environment to prevent damage to it in a humid environment. 4.
Check the airbag module regularly to make sure it is working properly. Personal Tips:1
The airbag module is an important part of vehicle safety and should be checked regularly to ensure that it is working properly. 2.Install the airbag module in dry.
-
Hello, in this case, the airbag reports the internal fault, then there are several situations, one is that the chip inside the airbag control module causes burning, there is an internal fault, and there is a short circuit phenomenon in the internal diode and capacitor circuit, which we can repair first, and deal with the other situation is that our airbag control module is installed under the gear that is most prone to water ingress, so check whether there is water ingress, if there is a loss, We can clean up the water. In this case, if it is just a diode chip that is burned, then we can replace it, deal with it and then it can be installed and used, if it is the internal chip CPU burned, then we need to replace the new airbag control module, and then the module can be programmed and learned.
-
The 10th-generation Civic has only 4 airbags in front of the main and co-pilot, steering wheel and co-pilot.
The model has 8 airbags. Including the 4 mentioned above, plus the main and co-pilot A-pillar airbags, the main and co-pilot head airbags.
Hope it helps.
Airbags are generally composed of sensors, electronic control units (ECUs), inflators, bags, clocksprings, etc., and usually the inflators and airbags are made together to form an airbag module. The sensor feels the intensity of the car collision and transmits the felt signal to the controller, the controller receives the signal of the sensor and processes it, when it judges that it is necessary to open the airbag, it immediately sends out an ignition signal to trigger the gas generator, and after the gas generator receives the ignition signal, it quickly ignition well produces a large amount of gas to inflate the air bag. When a car has a frontal collision accident, when the airbag control system detects that the impact force (vehicle deceleration) exceeds the set value by the collision sensor, the airbag computer immediately turns on the electric squib circuit in the inflatable element, ignites the ignition medium in the electric squib, and the flame ignites the ignition powder and the gas generator, produces a large amount of gas, inflates the airbag just in it, makes the airbag expand sharply, breaks through the decorative cover plate on the steering wheel and drums to the driver, makes the driver's head and chest press on the airbag that is full of gas, buffers the opposite driving The impact of the driver and then the gas in the airbag is released.
Composition of an airbag system.
The airbag system mainly includes collision sensors, airbag computers, system indicators, airbag components and connection lines, and the airbag components mainly include airbags, inflators and igniters. >>>More
The fuel tanks are all designed to be 50 liters, and there is no question of how much fuel to drink. >>>More
Right! Because the reaction time of the general airbag is enough to kill a person twice (100km h). >>>More
The car only uses seat belts at low speed to protect the safety of the driver and passengers If the car crashes when it is fast driving, it is necessary to use the airbag So what is the working principle of the airbag.