How to remove the old paint layer from the surface of the paint

Updated on Car 2024-05-19
17 answers
  1. Anonymous users2024-02-10

    There are three ways to strip paint:

    1. Use 240 or 320 sandpaper to sand.

    2. Buy paint thinner, dip it with a rag and apply it on the façade.

    3. Buy paint remover, spray it on the surface of the door and apply it with a rag.

    It is not easy to completely remove the white paint, because the white paint has completely penetrated into the brown eye of the wood. If this is not successful, the color change can only be sprayed with an oil-mixed primer and topcoat, not a clear paint.

    Of course, if the brown eye of the substrate itself is relatively small, or if a transparent primer is added to the bottom of the paint when making paint in the past, you can remove the paint first, and then use sandpaper to polish it, which is still very promising to completely remove the paint successfully.

  2. Anonymous users2024-02-09

    Tools Raw materials.

    Scrapers, wire brushes, coarse, medium and fine sandpaper, chemical paint removers.

    Method: Inspect the surface for cracking, peeling, flaking and loose paint film. Depending on the severity of the damage, you may choose to use one or more of the following methods for surface treatment before applying a new coating.

    Scrape. Whether it's plaster and wall panels or wood and ferrous metals, this is the traditional and effective method for most flat finishes. Triangular or oval blades are suitable for scraping corners and circular contours.

    Be careful not to chisel or damage the surface. Sand all the burrs with medium garnet sandpaper first, then again with fine sandpaper.

    Clean with a wire brush.

    With a hard wire brush, care must be taken not to damage the substrate. Once all loose paint has been removed, sand the surface with medium garnet sandpaper and then fine sandpaper.

    Burnish. If the paint film is only slightly peeling, you can simply sand it in the order of coarse, medium and fine sandpaper.

    Chemical paint strippers.

    Choose a paint stripper that is suitable for coating and substrate treatment. Since paint strippers are likely to damage brushes, use an old or cheap natural bristle paint brush to apply paint stripper. According to the manufacturer's recommendations, give the paint stripper sufficient reaction time, usually 15-20 minutes or more, depending on the thickness of the old paint film.

    Carefully remove the softened paint film with a spatula or wooden scraper and scrape it into the double glove bag of the carton. If needed, apply another layer of paint remover, then wipe the surface clean with a paper towel, newspaper or special scrubbing pad. Remove children and pets from the work area before using these products.

    Cover floors and steps, and remove plants, carpets, and furniture. When finished, dispose of the waste carefully following the manufacturer's instructions. There are some low-odor alternatives to strong solvent paint strippers, but they can take hours to do the same job.

    Once the paint remover has taken effect, the surface is thoroughly sanded with garnet fine sandpaper and dust removed before applying the primer, colorant or varnish.

    Precautions. Protect your eyes with goggles or a face shield;

    Protect with chemical-resistant gloves, long-sleeved shirts and pants**;

    Protect the respiratory system with a special respirator that resists chemical solvents.

  3. Anonymous users2024-02-08

    1. You can use paint remover to brush directly on the surface of the furniture, about 3 times;After brushing with a thick layer of paint remover, cover its surface with aluminum foil;After about 30 cents, remove the aluminum foil, the old paint layer will automatically wrinkle, you can use a brush dipped in hot water to clean it up. If there is any residual piece of paint, we can wipe it repeatedly with a cloth dipped in alcohol.

    2. Or you can use boiling water to soak the caustic soda, and use a brush to apply it to the paint surface of the furniture while the water is hotIn about 5 minutes or so, the old paint will wrinkle, and it will be enough to wipe it off with a rag. You can also adjust the developer powder into a liquid according to the instructions, or use an ammonium bicarbonate solution, apply them evenly on the furniture, and wait until the paint surface of the old furniture is soft and wrinkled, and wipe it clean with a cloth.

    3. When you use paint remover, you need to cover the surrounding floor with thick kraft paper, plastic, etc., and maintain good ventilation indoors.

    You can also ask a professional to renovate the old furniture, usually they will remove the paint from the old furniture and then refresh the paint, so that the paint will have better adsorption. In addition to this, it is also possible to apply furniture refurbishment stickers directly to old furniture by purchasing them online, which is a simple and convenient way to renovate.

    Extended Information: Care Considerations.

    1. Avoid direct sunlight. Although the winter sun is not as intense as in summer, the long sun exposure combined with the already dry climate makes the wood too dry and prone to cracks and partial fading.

    2. Regular maintenance should be carried out. Under normal circumstances, waxing only once a quarter is sufficient, so that the furniture looks shiny and the surface does not vacuum, making it easier to clean.

    3. Keep it moisturized. The moisture of wooden furniture can not be provided by water, that is to say, it can not be simply wiped with a wet rag, but should choose professional furniture care essential oil, which contains natural orange oil that is easily absorbed by wood fibers, which can lock the moisture in the wood, prevent the wood from drying out and deforming, and nourish the wood at the same time, so that the wooden furniture can regain its brilliance from the inside out and prolong the service life of the furniture.

  4. Anonymous users2024-02-07

    If the furniture is used for a long time, the paint film will age, the color will become darker, the luster will be lost, and even the phenomenon of partial peeling will occur, which will shorten the service life of the furniture and be unsightly. It is necessary to remove the old paint and refresh the paint, and here are a few easy ways to remove the old paint

    1.Paint strippers.

    Brush the paint surface directly on the paint surface of the old furniture with paint remover, brush it 3 times in a row, the old paint layer will automatically wrinkle, scrape off and clean it with a brush dipped in hot water. If there are still residual paint pieces eaten into the seam of the wood after stripping the paint, you can wipe it repeatedly with a cloth dipped in a little alcohol until the old paint is all off. In this way, there is no corrosive effect on wood.

    2.Caustic soda. Soak the caustic soda with boiling water, smear the paint surface of the old furniture with a brush while the water is hot, the old paint will wrinkle quickly, scrape off, and then scrub it repeatedly with clean water to reduce the damage of caustic soda to the wood and ensure that the new paint is firmly attached. This paint stripping method is economical and practical, but the corrosiveness of caustic soda is strong, and the water should not be too concentrated when distributing.

    3.Developer.

    After buying a bag of developing powder for washing ** according to the instructions, add an appropriate amount of water and apply it to the furniture, the original paint film will soon become soft, and it can be removed by rinsing with water or wiping with a cloth.

    4.Ammonium bicarbonate.

    Apply the ammonium bicarbonate solution evenly to the furniture, and after 10-20 minutes, thoroughly brush it with water, and the old paint will fall off.

  5. Anonymous users2024-02-06

    It is necessary to remove the varnish from the surface of the old furniture. You can't use a heater to soften the varnish on the surface and then use a knife to remove the relative? Or just use an angle grinder to sand it off.

  6. Anonymous users2024-02-05

    The old furniture surface paint can be removed by soaking in thinner material or banana water for a period of time, and then removed with a shoulder board, after the surface paint and thinner material or banana water are diluted, it will fall off with the surface of the furniture, and only in this way can the paint be removed.

  7. Anonymous users2024-02-04

    You can first use sandpaper to polish off the old paint on the surface of the original furniture. If the sanding is not clean, rub it with sandpaper, and now use an electric brush to polish. It's easy and clean.

  8. Anonymous users2024-02-03

    If you want to get rid of this old paint, it's really hard to get tired of it, so you can only wipe it off with sandpaper, or apply a layer of other base colors first, and then apply paint.

  9. Anonymous users2024-02-02

    How to remove the old paint on the surface of the furniture: first use coarse sandpaper [180-320 mesh] to polish, and then use fine sandpaper [400-600]. If you can't polish it yourself, you can hire a carpenter and use a sander to polish it.

  10. Anonymous users2024-02-01

    Ingredients: Alcohol, water.

    In the case of paint on clothing, for example, the removal method is as follows:

    1. Add water and alcohol to the basin and stir well.

    2. Soak the clothes with paint in an alcohol solution.

    3. The time is 15 minutes.

    4. Take out the clothes after the time is up, and gently scrub them with your hands for about 1 minute.

    6. After rinsing with water, you can see that the paint on the clothes has been removed.

  11. Anonymous users2024-01-31

    First of all, look at the nature of the paint, if it is a water-based latex paint, such as interior wall paint, then moisten it with water, and then wipe it slowly;

    If it is an oil-based coating, it is difficult to do, and it depends on what surface it is painted on, metal, wood, this kind of paint has good adhesion, if it is baked, it is generally not removed, there is a special paint remover, you can go to the paint market to ask.

  12. Anonymous users2024-01-30

    To be clear, the paint should first be moistened with water, and then brushed with a wire brush.

  13. Anonymous users2024-01-29

    The old house decoration paint needs to be replaced regularly, and with the growth of time, the paint will fade, age, and fall off. In order for the new round of renovation to go smoothly, it is necessary to remove the paint from the old house. So how do you remove paint from an old house?

    1.Eraser method.

    For small areas of paint stains, you can use an eraser to gently wipe them, which can achieve a good stain removal effect.

    2.Grinding method.

    Pick the right sandpaper and sand the darker parts of the paint until the paint is scraped clean.

    3.Chemical shell-breaking agent.

    There are many chemical shell breakers on the market that can be applied to the surface of the paint and wait for a while before wiping the fankai with a scraper.

    4.High pressure water cannon.

    For the paint on the exterior wall of the old house, you can use a high-pressure water gun to spray it to wash the paint clean.

    5.Paint stripper.

    A paint stripper is a special solvent that softens the paint and helps us scrape it off.

    It should be noted that after the paint is removed, it may cause scratches and unevenness on the wall, and it needs to be repaired and sanded to ensure that the wall surface is flat and smooth. In addition, it is recommended to be safe when removing paint, avoid direct contact with the skin and respiratory tract with chemicals, work in a well-ventilated environment, and wear appropriate protective equipment.

  14. Anonymous users2024-01-28

    Kiss! Hello, happy to answer your <>

    Dear, the old paint wall removal method: the method is very simple, you only need to use the putty grinder to directly call the grinding to clean up. Of course, you can also use a utility knife to cut through the wall, then brush the wall with hot water twice, and finally remove it by hand.

    The wall surface that is more chalverized must be removed, and after being removed, it should be applied again with white cement. Of course, because the original wall surface is relatively smooth, after the paint is removed, it needs to be sanded, such as: the unglued skin is removed, so that the new paint can be bonded to the old god of the wall.

    2. Primer is indispensable: the reason why the wall should be painted with primer is mainly to prevent moisture, protect the topcoat and enhance the texture of the topcoat. Especially for the renovation of old houses, the wall must be primed, if it is directly painted, the wall is prone to mildew and discoloration after a long time.

    Hope mine can help you <>

    If you have any other questions, you can ask me again<>

  15. Anonymous users2024-01-27

    Hello dear, when removing the old painted wall, you need to use the corresponding tools and agents, the steps are as follows:1Prepare the tool:

    Buy scrapers, gloves, goggles, and buckets filled with hot water and detergent. 2.Prepare the potion:

    Paint removers can be used on walls with a large coating area, which can be purchased in large building materials markets. For small areas of old paint treatment, soda ash powder + water can be used to make a solution. 3.

    Apply paint remover: Use a brush to evenly apply the paint remover to the surface of the old paint and leave it on for 20-30 minutes. 4.

    Scrape off the old paint: Use a scraper to scrape off the loose oil balance paint, and the sock thickness can be repeated by applying remover several times until it is completely removed. 5.

    Cleaning the surface: Wash the scraped off wall surface with a mixture of water and cleaning agent. 6.

    Cleaning up the garbage: Put scraped waste material in a plastic bag and throw it away. 7.

    Finally, sandpaper sanding is fine. Special attention should be paid to the removal of old painted wall surfaces with attention to safety. Be sure to wear protective equipment such as gloves and goggles to avoid damage to the body.

    If you are not sure how to complete the above steps, it is recommended to find a professional worker or decorator to do it.

  16. Anonymous users2024-01-26

    Hello, there are usually several ways to remove old painted walls:1Hand scrub:

    Use tools such as sandpaper or grinding stones to grind off the old paint. This method is suitable for small area walls, but it requires a lot of effort and time. 2.

    Scratching: Use a scraper or blade to hang up the old paint. This method is suitable for small areas or for scraping off loose outer layers of paint, but there will be a lot of paint chips.

    3.Chemical removal: Use paint remover or chemical cleaners to dissolve old paint.

    This method is fast and does not rely too much on physical strength, but it requires attention to safe operation and environmental pollution. 4.Hot air blows the rest of the stool to clean the ashes:

    Use an electric heat gun or other coarse tool to heat up the old paint and then scrape it off. This method is faster, but you need to be aware of the fire risk of glue and household items. Which method to use depends on considerations such as wall area, paint quality, time consumption, etc.

    Please pay attention to protect your eyes, mouth and nose during the construction process to avoid personal injury.

  17. Anonymous users2024-01-25

    Summary. Hello dear, you can use the following methods.

    1. How to wash off peanut oil and salad oil: peanut oil or salad oil can be used to remove paint paint, add some dish soap to rub it in the position of the paint, and then rub it twice with a rag, and the paint will always be removed.

    How to remove the paint from the paint.

    Dear, you have a good spine, you can use the following methods 1, how to wash off the peanut oil and salad oil of the paint of Chaoji Xun paint: remove the paint with peanut oil or salad oil, rub it in the position of the paint and then add some dish soap to rub it, and then rub it twice with a rag, and the paint will always be removed.

    2. How to wash off the banana oil: If the smell is relatively large, you can use banana oil to wash it on the position where it is stained with paint. Because there is no smell when using rotten banana oil. Or the former mu can go directly to the paint shop to buy some turpentine for cleaning.

    3. How to wash off the paint, take a small amount of wind oil and apply it to the paint stain, and rub it a few times until the paint falls off. Zhou Chi Wei then washed it with clean water and cleaned it, compared to gasoline, the effect of removing paint with wind oil essence will be better, after all, the taste of wind oil essence is not as big as Danyu.

    4. How to wash off the paint beam and cover the paint of the rubber disturbance state immediately with a cloth or cotton ball dipped in gasoline, kerosene or thinner material to scrub, and then wash with a detergent solution. If it is stained with water-soluble paint (such as water-soluble paint, latex paint) and household interior wall paint, wash it off with water in time.

    5. How to wash off the lead and nylon fabrics that are stained with paint, you can first apply the lard of Huaiji and rub it, then soak it with detergent and rinse it with water. Wash with wild omen gasoline or other thinnersNail polish remover is also available, it works well, and it has a fragrance.

    If the dirt is not contaminated for a long time and the dirt has not solidified, it can be washed with turpentine. Old stains (which have solidified limbs) can be soaked in a mixture of acethyl ether and turpentine lifting oil (1:1) to see that the stains become soft (about 10min), and then washed with gasoline or benzene, and then rinsed with water.

    Dear, this is the answer I made for you, I hope mine is helpful to you.

    Have a great day! Than the heart

    I hope you can give it a thumbs up.

Related questions
11 answers2024-05-19

Common methods for removing old paint from the surface of steel are flame treatment, manual or mechanical methods, and chemical methods. >>>More

9 answers2024-05-19

Add some salt when washing clothes to remove sweat stains.

12 answers2024-05-19

1. Cool oil or lard: first identify what kind of paint is stained under it. If it is a general water-soluble paint, it can be removed directly with water, and the clothes are more valuable to prevent the texture from being affected, and the non-water-soluble paint can be directly coated with the cool oil used to repel mosquitoes to the direction of the paint. >>>More

24 answers2024-05-19

The easy way is to squeeze it out. However, it may cause local infections View original post

14 answers2024-05-19

If it's not completely white, you can't wash it with bleach or 84, it will fade. >>>More