Which coating is good for water based thermal insulation?

Have you ever used the coatings of Beijing Nimei Coating Technology Co., Ltd., its water-based industrial thermal insulation coatings and water-based building thermal insulation coatings are very good.

1. S111 thermal insulation coating has low thermal conductivity, low density, low thermal conductivity, no water absorption, good flexibility, aging resistance, corrosion resistance, water and liquid insulation, vapor resistance and other characteristics.

2. The thermal conductivity of ZS-111 waterproof, anticorrosive and thermal insulation coating coating is measured in time), which greatly ensures the thermal insulation effect of the coating, reduces the conduction and loss of heat of the object, improves the heat utilization rate of the equipment, and the energy-saving rate of thermal insulation of high-temperature objects can reach more than 80%.

3. Thermal insulation coating has good thermal insulation performance, and has good waterproof and moisture-proof, anti-corrosion, acid and alkali resistance, insulation pressure resistance and wear resistance, organic and inorganic materials can be painted, so as to overcome the application of water-based thermal insulation coating can not be applied in liquid, steam, underground, acid and alkali solution or corrosive volatiles or contact penetration, and ZS-111 waterproof, anti-corrosion and thermal insulation coating coating has good flexibility, can be brushed in temperature change frequently, The surface of the object with a large coefficient of thermal expansion or frequent vibration is insulated to avoid cracks and falling off when the object expands, contracts or shakes for a long time.

Napin thermal insulation coating is not bad, can block 91% of solar infrared rays and 100% of thermal radiation, completely ban the traditional insulation layer, the aging of more than 10 years, you can learn about it.

Indoor thermal insulation coating is divided into roof and interior wall, the roof is anti-radiation thermal insulation coating, the interior wall is water-based nano insulating glass bead coating, the interior wall thermal insulation coating is more commonly used is the water-based nano insulating glass bead insulation coating, Shuanghong water-based nano insulating glass bead insulation coating by primer, insulating glass beads middle layer and top coating group.

into a system material with thermal insulation properties.

Product Description: Water-based nano insulating glass beads thermal insulation coating is a one-component water-based paste material, the product is based on ultra-micro closed cell, outer open structure of nano silicon oxide, high optical refractive index of nano titanium dioxide, ultra-fine hollow glass beads, thermal radiation materials and fireproof and flame retardant materials through micro-nano macro structure design, and water-based film-forming base materials together to form an integrated, intelligent thermal insulation material. The product does not contain mercury, lead, cadmium, chromium, formaldehyde and other toxic and harmful substances that are harmful to the human body, and is an environmentally friendly product.

Product. Features::

1. Stable physical and chemical properties.

2. The thermal conductivity is small.

3. Large temperature resistance.

4. Easy construction.

5. Reduce building energy consumption.

6. Safety and environmental protection.

Construction dosage: The general construction dosage is 1mm per square area, and the dosage is about 1 kg.

It is recommended that the thickness of a single layer should not exceed 2mm.

It is recommended that the coating thickness of the standard application is not less than 2mm.

Thermal insulation coatings are divided into three types: barrier thermal insulation coatings, reflective thermal insulation coatings and radiant thermal insulation coatings, which are also very many on the market, and you need to determine the environment you use when purchasing, for example, it is recommended to use Ripham thermal insulation coatings for building interior and exterior wall thermal insulation, which is much more cost-effective.

1. Thermal insulation coating It is a water-based coating that has the functions of flame retardant, environmental protection coating and thermal insulation. Thermal insulation coating can effectively inhibit the radiation heat of infrared rays and the sun, its thermal insulation effect can reach about 90%, and at the same time, it can also inhibit the thermal radiation of low-temperature objects and the dissipation of nano objects and heat, and the indoor thermal insulation effect can reach 70% without loss. In addition, the construction of thermal insulation coating is also very simple, you only need to apply thermal insulation coating directly to the surface of the object with a brush.

2. The thermal insulation coating is relatively simple, and there are no volatile substances produced at room temperature or high temperature, and there is no odor. Thermal insulation coating also has the advantages of high temperature resistance, good hardness, dense coating, etc., and will not cause any pollution to the materials to be processed. In this way, it can protect high-end precision products, and can also be used in precision equipment, high-purity graphite crucibles, refining high-purity silicon, pharmaceutical refining equipment, advanced electronic processing equipment, etc.

3. When the heat insulation coating is applied to the kiln, the unique performance of wear resistance and anti-corrosion improves the uniformity of the temperature in the furnace through the infrared reflection of the coating. At the same time, the fuel can be burned more fully, so as to increase the thermal efficiency, and greatly improve the thermal efficiency of the refractory, so as to save energy, reduce energy consumption and prolong the service life of the furnace lining.

1. Waterproof and heat-insulating elastic exterior wall paint is a high-grade silicone water-based paint developed according to elastic silicon acrylic technology, which has excellent room temperature and low temperature elasticity of Qiaopai oak, which has a reflectivity up to 3 times higher than that of traditional paint, which can reduce the temperature of the exterior wall in the hot season, and then reduce the energy consumption of indoor refrigeration to achieve the effect of energy saving and emission reduction. The insulation of the house cannot be just the roof, but the entire perimeter (such as the roof, floor, facades, windows), and if you do the roof alone, the effect will not be very ideal.

2. Waterproof and heat-insulating coating is a new type of cooling coating that integrates reflection, radiation and hollow beads and heat insulation. As a means of thermal insulation, thermal insulation coatings play a role in heat reflection insulation, thermal radiation insulation or thermal insulation and energy-saving effects, which has extraordinary social and economic significance for industry and civil use, and can be said to be a four-to-two effect.

How to use waterproof and thermal insulation materials

1. Air circulation and heat insulation

It is to cover a hollow interlayer of about 30 cm on the roof, when the summer sun is exposed, because there is flowing air underneath, it can effectively isolate the heat transfer effect.

2. Water insulation method

This method has relatively high requirements for the quality of the roof, and now many residents use this insulation method, the roof is usually a shallow puddle, about 15 cm deep, and this roof insulation method can effectively and reasonably reduce the indoor temperature is relatively simple.

3. White light paper reflection method

The white light paper reflection method is to lay a layer of white light paper with a smooth surface on the roof, this material is tin foil, which is not easy to get oily stains, and can strongly reflect light and heat insulation.

What are the waterproof and thermal insulation coatings?

1. Polyurethane rigid foam is a low-density foam material with closed-cell structure, which has very low thermal conductivity and water absorption, good thermal insulation performance, convenient construction, and is suitable for any roof.

2. Polystyrene board is a roof panel made of cement and crushed polystyrene foam, which not only has the effect of heat insulation and waterproofing, but also has the role of an isolation layer, which can effectively prevent the cracking of concrete when it expands and contracts.

3. FS type insulation material is made of fly ash, sulfoaluminate cement, etc. poured and foamed under high pressure at room temperature, and the environmental protection and health performance is very good, because the density of the material is small, so the thermal conductivity is very low, and the waterproof effect is also very good.