What is Super Wear Resistant Floor Paint? The floor is super wear resistant, why is it not good to p

Super wear-resistant floor paint, also known as epoxy resin floor paint, is a two-component floor coating material with epoxy resin and water-based curing agent as the main raw materials, with ultra-high wear resistance in one molding, up to more than 7h. And it has smooth and beautiful, excellent corrosion resistance and wear resistance.

Wear-resistant floor paint refers to the ground coating that has been coated with multiple coatings to form a thick surface coating. The main functions are decorative, moisture-proof, dust-proof, seepage-proof, wear-resistant, etc.

Epoxy floor paint is a floor paint produced using a mixture of epoxy resin and hardener.

Epoxy resin floor paint has the characteristics of strong acid and alkali resistance, wear resistance, pressure resistance, impact resistance, mildew resistance, waterproof, dustproof, anti-slip, anti-static, electromagnetic wave and so on, with bright and diverse colors and easy cleaning. It adopts a one-time coating process, no matter how large the area, there is no connecting joint, and it is also a dust-free material, with strong adhesion, abrasion resistance, strong hardness and other characteristics.

Epoxy resin floor paint is widely used in electronics factories, machinery manufacturing plants, hardware factories, pharmaceutical factories, automobile factories, hospitals, aviation, aerospace bases, laboratories, offices, supermarkets, paper mills, chemical plants, plastic processing plants, textile factories, tobacco factories, candy factories, wineries, beverage factories, meat processing plants, parking lots and other surface coatings. At present, it has been accepted and used by many domestic manufacturers.

Precautions: Avoid construction under low temperature and high humidity conditions; After the two-component material is mixed, it should be applied in a short time; After the coating is completed, it should be fully passed before it can be put into use; According to the flatness condition of the substrate and the requirements of use, the coating thickness is determined. The worse the flatness of the ground, the thicker the coating system is used, the greater the coating load, the thicker the coating should be, if the coating is too thin, it is easy to be damaged during use, such as the ground on the first floor also needs to do a good job of waterproof treatment.

Dear, hello, I am glad to answer for you what is the reason for not painting on the floor paint A1, the air humidity is too high, if the temperature is too low or the water vapor content in the air is large, it cannot reach the condition of drying the coating, which will cause the paint layer on the surface of the coated object to dry not dry or dry too slowly. Solution: The best conditions for coating film formation are about 25 degrees of temperature and 65% of the air humidity, the minimum temperature of construction can not be lower than 5 degrees, if the temperature causes the paint is not dry or dry slowly, you can use heating to increase the temperature and speed up the drying of the paint.

2. If there is moisture on the surface of the coated object, if the surface of the painted object contains moisture, it will lead to the problem that the surface coating does not dry. Solution: If there is no drying phenomenon after painting, you can only shovel off the original paint layer, and completely wipe the moisture on the surface of the painted object when there is no debris in the county, and re-paint.

3. If the coating is too thick, if too many layers of surface paint are painted, it will cause the coating to be too thick, and it will also dry slowly. Solution: You can turn on the heater to increase the temperature and speed up the drying of the paint4, the paint is mixed with water, oil or other acids and alkaline substances, if the paint is accidentally doped with water or other oily substances, it may destroy the internal structure of the paint because of a chemical reaction, resulting in the problem that the paint is not drySolution:

The only way to deal with the cause of this trace is to repaint, because the original paint properties have been destroyed and can no longer be repaired. When adjusting the new paint, the acidic and alkaline colors should be carefully selected to avoid being stained by oil again.

If it is the base material of epoxy flooring, resin is generally used, and the common ratio ratio is 2:1, 4:1 and 5:

1. It varies according to the ground conditions and the construction environment. You only need to mix the two parts of the ingredients in the corresponding proportions. 2. If it is epoxy coating, it is also divided into several situations, among which the ratio of mortar and putty is 3:

1. If the ground environment is different from the on-site construction environment, a ratio of 2:1 can be used. However, it must be convenient to scrape the soil on site, and if it is not convenient to scrape and coat the soil on site after proportioning, it needs to be re-proportioned.

According to the viscosity of the main material, the ratio of the main material and putty can be or slightly higher, but it cannot exceed 1:1 at most, and it must be convenient for on-site construction. 3. Finally, the topcoat ratio of epoxy flooring, generally speaking, the curing agent should be according to 4:

1 or 5:1 ratio of the two evenly stirred and stared at the congratulatory before construction. The ratio is different, and the construction methods used are also different.

In fact, if Kaixiao Party has an understanding of epoxy flooring, it should know that the proportion of materials is not absolute, but needs to be distinguished according to the environment and viscosity of the site.

Corrosion-resistant floor paints are not corroded by common chemicals. This type of floor paint is specially formulated and treated to resist the corrosive effects of a range of chemicals and substances. Here are some common corrosive substances that do not have a significant effect on corrosive abrasion resistant floor paints:

1.Acids: Many strong acids, such as sulfuric acid, hydrochloric acid and acetic acid, cannot corrode wear-resistant floor paints. This is because the floor paint uses an acid corrosion resistance or anhydride curing agent, which makes it resistant to acids.

2.Alkalis: strong alkalis, such as sodium hydroxide and potassium hydroxide, will not cause damage to corrosive and wear-resistant floor paints. This is because acid-base neutralizers are often added to floor paints to protect the paint film from the attack of alkaline substances.

3.Solvents: Some common solvents, such as alcohols, ketones and ethers, etc., cannot corrode wear-resistant floor paints. This is because the floor paint Hongbo will use solvent-resistant resin as the main ingredient.

Although corrosive and wear-resistant floor paint can resist many common corrosive substances, it still causes some damage to floor paint due to special chemicals or strong corrosive substances. Therefore, during use, contact with these corrosive substances should be avoided as much as possible to keep the floor paint in good condition.

The main use of corrosion-resistant and abrasion-resistant floor paints is in places where high abrasion and corrosion resistance are required, such as factory floors, logistics centers, parking lots, and hospitals. This floor paint is made of corrosion-resistant resins such as epoxy, polyurethane or acrylate, which are highly resistant to corrosion and are durable and chemically resistant.

In addition to improving corrosion resistance, corrosion-resistant and wear-resistant floor paints can also provide anti-slip, dust-proof, anti-static, and aesthetic features. It provides complete protection for the floor, making it resistant to abrasion, impact and chemical attack, while being easy to clean and maintain.

The selection of corrosion-resistant and wear-resistant floor paint should be carried out according to the specific use environment and requirements. Different industries and burn-out sites are exposed to different types of chemicals, so it is necessary to choose the appropriate floor paint to suit the specific environment. When choosing a floor paint, you should first understand the corrosion resistance and scope of application of the floor paint, and install and maintain it under the guidance of professionals.

There are several substances that can corrode wear-resistant floor paints:

Strong acids and alkalis, oils, alcohols, esters and other chemicals, these substances will destroy the cross-linked sock bond structure and adhesion of floor paint, resulting in floor paint peeling or discoloration.

High or low temperatures, these temperatures can affect the curing and hardness of the floor paint, causing the floor paint to crack or soften.

Physical forces such as heavy pressure, impact, friction, etc., which can cause wear, scratches or shelling of floor paint.

If you want to protect your floor paint, here are some things you can do:

Choose the type of floor paint that suits your use environment and requirements, such as anti-corrosion, high-temperature resistant, anti-static, anti-slip, etc.

Apply the floor paint according to the correct application process and conditions, such as base surface treatment, coating thickness, curing time, etc.

Clean and maintain the floor paint regularly, such as using a soft mop or vacuum cleaner, avoiding the use of strong alkaline or acidic detergents, and repairing small areas of damage in a timely manner.

Hope this information is helpful to you.