Hengxin refueling machine warranty and replacement time, his reputation? 15

I use the S1 enhanced version,I have a friend who uses P800,In terms of price,The two machines are not too much different,I'm talking about parallel prices,Both are between 2300-2400。

Choose a mobile phone,I think the first is the appearance,The appearance of these two mobile phones is very different,S1Round and concise,P800Sharp edges and corners,This involves personal aesthetics,It's up to you to like it。

In terms of technical indicators, the P800 is not as good as the S1 Enhanced Edition, the difference between software memory and running memory is doubled, the P800 is 128M and 64M, and the S1 Enhanced Edition is 256M and 128M. However, the European version of the P800 improved version, that is, the O2 XDA Orbit 2 Communicator has been listed in Europe last year, the O2 XDA Orbit model in China is the P800, the storage capacity has been the same as the S1 enhanced version, CUP has risen to 400M, I believe it will comprehensively surpass the current S1 enhanced version, but the domestic upgraded P800 has not yet been listed.

In fact, the biggest difference between the two is with or without GPS navigation,S1There is no GPS navigation function,Of course, if you really like the appearance of S1,There is a need for navigation function,Then you have to give S1 an external GPS module,It's best to be Bluetooth,It doesn't cost a few dollars,But it requires strong hands-on ability。 However, I personally think that if it is used for driving navigation, the GPS function of the mobile phone is basically a fancy shelf, because in most cases, you need to turn on this function all the time, put the mobile phone in front of you, at this time to a**, to a text message, it is inevitable to be in a hurry, unsafe. And the battery capacity of the mobile phone is limited, it is difficult to run for a long time, and the main reason for buying a mobile phone is to communicate, and most of the power is consumed on GPS.

In terms of operability,P800There are two more buttons,There are also trackballs and navigation rings,It's definitely better than S1's operability,I think the problem of operability,It's basically a matter of benevolence,No matter how bad the mobile phone,Get used to it,It's also a good mobile phone,Do you say yes?

For software operating systems, both can be run, basically there is not much difference, you can install software to achieve various functions, the expansion ability is basically the same, it is difficult to distinguish each other.

Press the Set button twice, enter the 123456 press the Confirm button, enter the unit price value, and press the Confirm button again.

Zibo Changying Petrochemical Equipment****. 0533--7320267,-7312277

Turn off the power, shut down the fire, extinguish the fire with dry powder or foam fire extinguisher, sand, etc., and call the police.

2. Report: 1. Report to the commander when the person hears the call for help. 2. The commander starts the emergency plan. 3. According to the instructions of the commander, the biller shall report urgently to the company in the area. When the stationmaster is not at the station, he reports to the stationmaster and the area company.

4. Extinguishing and isolating: 1. Concentrate on standing upwind to extinguish the initial fire. (Extinguishing from the outside in, when opening the cover, wear protective gloves, and the other person should hold a fire extinguisher on the side to prevent people from hurting outside the fire).

2. Notify other positions for reinforcements as appropriate. 3. Isolate and protect adjacent equipment with asbestos blankets and move flammable materials according to the situation.

5. Vigilance and evacuation: 1. Place warning signs, delineate the warning scope according to the situation and be responsible for on-site vigilance. 2. Evacuate people and vehicles unrelated to the rescue at the scene.

6. Report the fire alarm: The biller shall call the police to 119 according to the instructions of the commander.

7. Rescue the wounded: In the event of an injury, the commander and rescuers shall immediately organize personnel to carry out on-site rescue, dial 120 for assistance** or immediately go to the nearest hospital for rescue.

8. Rescue and rescue: ensure that the access to and from the fire is unblocked, respond to firefighting, first aid and external emergency reinforcements, and cooperate with fire fighting.

9. Protect the scene: Organize personnel to protect the scene, wait for the confirmation of the insurance company, take pictures if possible, and save the image data.

It is usually through an adjustment screw or a regulating handwheel. These are just small range adjustments.

2. The digital disk of the hand dial counter. Some gas stations remove the glass and counter baffle on the inside side of the dispenser, but do not remove it on the customer-facing side. When refueling, one person stands next to the refueling machine and toggles the counter digital disk, and when the refueling volume is large, it toggles the ten digits, and the less dials the single digits.

3. Adjust the displacement adjustment device of the meter. Some gas stations remove or pry loose the lead seal on the displacement adjustment cover on the fuel dispenser gauge without authorization, and after the line is pulled out and adjusted, the line is threaded into the clamping; There are also those who leave the line too long, and the displacement adjustment cover can be removed and adjusted without moving the seal, which can reduce the fuel consumption of the fuel dispenser by 1 to 5 percentage points.

4. Replace the bevel gear on the counter spindle. The geometric size and modulus of the bevel gear on the counter spindle of various types of fuel dispensers are also different, generally 20 teeth and 25 teeth. After the bevel gear is replaced, the miscellaneous person will pay the customer 4 5 percentage points less oil for each additional tooth.

5. Install the shunt back tubing device. Some gas stations install a diversion return pipe device on the output pipeline of the fuel dispenser meter, and a part of the oil output through the meter is controlled by the valve to flow back to the oil suction pipeline in front of the oil pump, the valve is closed, no oil is diverted, and the measurement is accurate.

There are various ways for cheaters to install divert back tubing. Some of them are perforated in the metal pipe from the oil outlet of the fuel dispenser meter to the oil seeker, and a diversion return oil pipe device is installed; Some cut off the oil seeker and the oil pump hose of the oil gun, and install a three-way diversion.

6. Adjust the cumulative number mechanism of the counter. Some gas station staff, taking advantage of their work, opened the door of the gas dispenser, removed the counter baffle, and pulled back the cylindrical spur gear of the counting mechanism with their hands to steal the oil from the gas station.

The upstairs said that the accuracy of the oil and the accuracy of the oil supply are the problems of the technical supervision department to deal with the seal. It is illegal to regulate privately.

When the refueling machine is just started for refueling, the oil output speed will have a process from slow to fast. This is similar to car acceleration, there is a process from low speed to high speed, and it takes a few seconds to reach a steady flow rate.

In addition, according to national regulations, the refueling measurement of slow, medium and fast flow rates of fuel dispensers must comply with the measurement regulations. The refueling machines of this station are all carried out by the legal metrology verification agency to carry out compulsory verification, all of which are within the effective verification cycle, and the verification agency has carried out special numbering seals for the key parts of the refueling machine. Therefore, the refueling of this station, regardless of slow gun or fast gun, is in line with the national measurement requirements.

Mainly the problem of computer chips,