How do I use the mask I wear? The correct way to apply the mask

Using the applicator** is a great way to nourish and repair your skin. Below I will introduce you to the correct use from multiple perspectives such as preparation, application, maintenance, and cleaning.

Before using, make sure your face is thoroughly cleansed so that you can better absorb the nutrients in it. Choose a gentle cleanser to cleanse and rinse thoroughly with warm water. If desired, a toner can also be used to further cleanse the face.

Then, open the **package and remove ** the tablet. Before applying, gently massage the pouch so that the essence inside is evenly distributed over the slab. Then place ** and lay flat on the palm of a clean hand.

Now, you can start applying ** evenly over the entire face. It can start on the forehead and work its way down to areas such as the nose, cheeks, and chin. Be careful to avoid sensitive areas such as eyes and lips. Gently press with your fingertips to make ** fit well with the skin.

After applying, you can apply a proper massage to help you absorb better. You can gently massage your face with circular motions with your fingertips, or gently pat with your fingertips to boost blood circulation and metabolism of your facial skin.

Next, you need to keep ** for a long time. According to the instructions of the **product, it is generally recommended to leave it on for 15-20 minutes. While you wait, you can choose to sit still or lie down and relax and enjoy the moment of pampering your skin.

When the time is up, you can gently remove the ** from the bottom to the top. If there is any remaining serum on it, you can use your fingers to massage it evenly into the skin. Next, rinse your face with water and gently pat dry with a soft washcloth.

Apply skincare products such as moisturizing lotions or toners to lock in moisture and provide extra nourishment to the skin. This helps the skin absorb nutrients better and stays moisturized and supple.

There are a few key steps to proper application**: prepare your skin, apply evenly, leave it on for a certain amount of time, cleanse your skin, and moisturize it. Give your skin proper nourishment and repair during your twice-weekly treatments, and you'll notice that your skin becomes healthier and smoother.

Give it a try and let ** be a good helper for your beautiful skin care.

Total word count: 802 words.

Its practical hands can be, apply a layer on the face, that is, you can see that there is a layer ** on the face, basically you can't see the original skin tone is the best, cover the face **, wait for 15-20 minutes and wash it with water.

You can apply it by hand after washing your face and hands, or you can rub it on your face with a cotton pad. But it is recommended to love you with your hands. The hand has a temperature, and it is easy to grasp.

Push it open with your hand There are also tools to buy **, with small spoons, small bowls, and small brushes.

**I usually do it once every 3 days, and I do it like this.

Our skin problems are increasing day by day, and it is difficult to solve them simply by skin care products. You may know how to do it once every two or three days, but do you know the correct way to apply it? Only the right way to shout the limbs will work best.

The correct time is 15-20 minutes to saturate. Your misconception is that the longer you apply it, the better the absorption effect? Not so, ** for the absorption of nutrients is limited, too long to apply the phenomenon of upside down, normal about 15 minutes, **can be absorbed has been absorbed, can not be absorbed even if it is applied for a long time is useless.

Wash your face with warm water before applying **, which is conducive to absorption after opening the pores. If you don't clean these nutrient solutions, the longer the stay, the easier it is to produce a burden, because the excess nutrients of the skin will cause more problems. Finally, it is recommended to rinse off with warm water.

The frequency of applying ** is 1-2 times a week in summer and 2-3 times a week in winter, because it is relatively dry in weather. Applying it after bathing** can also have a certain doubling effect.

1. Test sensitivity. Before using, be sure to do an allergy test, which is a step that many mm ignore. First apply a small ** dressing on the back of your hand, wash it off after 30 minutes, and if there is no redness and itching reaction at the application site, you can wipe it on your face.

Especially for DIY**, you should stick to the habit of doing an allergy test first.

2. Cleaning. Before applying, you should remove makeup, wash your face, and if necessary, you can also exfoliate first. A clean face is conducive to the absorption of **, and also prevents dirt and dust from entering the pores.

3. Warm compress. In order to get the best results, you can apply a hot towel to your face for three minutes before applying ** after washing your face, and then massage it all over your face for three to five minutes to open pores and facilitate absorption.

4. Applying order. The order of applying ** should be from the neck, jaw, cheeks, nose, lips, and forehead, from bottom to top; Around the eyes, eyebrows, and upper and lower lips, it should not be applied**. It's best to start with the T-shaped area, which is prone to drying, and then the U-zone.

5. Remove. After about 15 minutes of application, touch it with your fingers, and if you don't feel sticky, you can start from the edge of the film and slowly peel it off from the bottom up. Generally speaking, after drying, it will cause the tightening of the stove branches to shrink and wrinkles, so remove them immediately when drying, and do not stay on them for a long time or overnight.

6. Cold compress. After removal**, the residue on the face should be washed away with clean, warm water, and then applied to the face with a cold towel for a few moments to induce the shrinkage of pores, and finally applied emollient makeup. Don't miss the astringent step, some cleansing or exfoliating **, if the post-processing is not careful, it may cause skin damage.

**Before use.

Step 1: Before using, first do a good job of removing makeup, cleaning and washing your face, and if necessary, you can first exfoliate to facilitate absorption, so as to avoid dirt and dust from entering the pores.

Step 2: After the cleansing treatment, apply a hot towel to your face, followed by a simple facial massage** to improve the absorption** for better results.

**Ongoing.

Step 3: If you use the smear-type moisturizer**, you can do it at the same time when you take a bath, which is more conducive to the hydration and absorption of the skin, because the smear-type **product is easy to dry and the water volatilizes quickly, and the use of it in the bath can avoid the discomfort of stinging in the skin, and at the same time, it can also avoid the water and nutrients of the **reverse absorption**.

Step 4: The correct order of use of the smearing type must be mastered, and it can be applied from the neck**, jaw, face, cheeks, nose, lips, chin and forehead, etc., in the order from bottom to top. In addition, the eyebrows and lips should not be applied, and for the face, you can start from the T-shaped area that is easy to dry, preferably the U-zone.

**After use.

Step 5: The best time to apply ** is generally controlled in about 15 minutes, for the application type ** can be gently pressed and touched with your fingers, if you feel that there is no sticky hand, you can start from the edge of the film, and slowly remove it from the bottom up. Under normal circumstances, there will be some wrinkles in tightening after drying, so it must be removed immediately after drying to avoid water and nutrient loss for too long.

Step 6: After removing the face**, wash the face immediately with clean, warm water**, wash off the remaining substances on the face, and then rinse with a cold towel or cold water to promote the natural contraction of pores. Finally, the use of skin care products such as lotions, lotions, and creams, and finally moisturizing and locking in moisture will double the skin care effect.

Proper usage of smeared **.

Smearing ** is a very popular type of cleaning**, so how to use it? How do you apply it in general? How long should I leave it on? Do you have to wash your face after applying? What is the best way to wash your face? Do I still need to use skincare products after washing my face?

First of all, do a facial cleansing, wash your face with facial cleanser, if you have makeup, be sure to remove makeup, and apply a hot towel to your face after washing your face, from 1 to 3 minutes. This is a pre-emptive preparation for smearing cleans** and should never be overlooked.

Once the pores have opened, pat some toner on your face and apply a cleanser**, starting with the cooler cheeks, then the forehead, nose, chin, etc., which will make the overall effect more consistent. Generally, wait 5 to 10 minutes to complete.

There are many kinds of cleansing**, but you must remember that whether it is torn or cleaned, it should be washed with water in the direction of the pores, and then the normal order of skin care can be followed. This is also very particular, once the cleaning is not clean, it is easy to breed some bacteria and damage the ** tissue, so you can't be careless.

Before using the smearing type**, you need to remove the makeup on the face, then use a cleanser to cleanse the face, and after drying the facial moisture, you can apply a hot towel to the face, then use toner, and start to use the smear**, generally at any time with the Nosbel smear**.

To use the application type**, apply from the neck**, jawline, face, cheeks, nose, lips, chin, and forehead in a bottom-up order. In addition, the eyebrows and lips should not be smeared, and for the face, you can start from the T-zone, which is prone to dryness, and finally the U-zone.

The best time to apply ** is generally controlled in about 15 minutes, and when the time is up, use warm water to wash off the face**, and then rinse it with a cold towel or cold water to promote the natural contraction of pores. Finally, apply skincare products such as lotions, lotions, creams, etc.

Leave-in** Application.

1. It can be used as usual with skin care products on friction.

2. After wiping the skin care products, warm the whole face with the palm of your hand to help absorb it.

3. Avoid the eye area, gently apply ** from the bottom to the top, lift the skin by the way, and apply it to the neck.

4. Wash with warm water the next morning**. It is best to clean again with a facial cleanser. Because it is not necessary to wash immediately after use, but it still needs to be cleaned the next morning, please note this.

5. Use it 2-3 times a week.