Design and construction of integrated prefabricated pumping station

The integrated prefabricated pumping station is a lifting equipment for lifting sewage, rainwater, drinking water and wastewater, which is transported to the pressurized pumping station installed on site after unified production and assembly by the factory. In accordance with the requirements of the construction and assembly drawings and the relevant installation technical standards, the integrated prefabricated pumping station that has entered the site is installed on the specified foundation or facilities, and the process of leveling and stabilization, mechanical assembly and equipment connection, electrical wiring and testing, fixed value adjustment and testing, ground and centralized control simulation action test is completed, so that the integrated prefabricated pumping station can meet the conditions for trial operation.

The integrated prefabricated pumping station is composed of a top cover, a glass fiber reinforced plastic (GRP) cylinder, a base, a submersible pump, a service platform, a pipeline and other parts to meet the requirements of pressurization and drainage equipment. The integrated prefabricated pumping station enters the construction site or other designated places to land and complete the process of unpacking acceptance, handover processing, and delivery for temporary storage.

The prefabricated pumping station stainless steel pipe crusher product features an optimized design of the blade to ensure the cutting capacity and service life. Double drum design, large water flow, can meet the application of large flow rate. The processing capacity of the PZG crusher can reach 420m3 h, and the total power of the motor.

Shanghai Lianyu was established in 1991 and was identified as a "high-tech product" by the Provincial Department of Science and Technology, Shanghai Lianyu integrated prefabricated pumping station equipment is made of high-strength alkali-free glass steel fiber, combined with resin material winding, its strength is equivalent to 2 times that of traditional laminated FRP, hoop tensile strength is greater than 300MPa, axial tensile strength is greater than 80MPa, and compressive strength is greater than 200MPa. It is fully resistant to corrosion, tearing and other damaging forces, and is permanently waterproof and durable.

Prefabricated integrated pumping station manufacturers:

1. Hubei Nuosai New System Technology ****.

The company is located in Wuhan City, Hubei Province, is a collection of research and development, design, development, operation and sales of water tank equipment and after-sales technical services for the rental of high-tech enterprises in Hubei Province.

2. Chongqing Xingbao environmental protection equipment.

The company is located in Baisha Industrial Park, Jiangjin District, Chongqing, 1 km away from the entrance of Chengdu-Chongqing Ring Expressway, 50 km away from the main city center of Chongqing, Jiangxi Expressway, Jiangqi Expressway and Third Ring Expressway, with very convenient transportation.

3. Yancheng Hunter Environmental Protection Technology ****.

The company's main products are: integrated prefabricated pumping station, integrated pumping station, sewage treatment equipment, integrated sewage lifting pumping station, FRP integrated pumping station, buried integrated sewage lifting pumping station, integrated sewage treatment equipment and other products.

4. Hechuan Pump Industry (Shanghai) ****.

The company is a fluid field equipment manufacturer originated from the technology of South Korea's Crane Pump Co., Ltd. and invested by the board of directors of Hong Kong Sino-Ocean Holding Group in China. Since its establishment, the product has been continuously improved and optimized.

5. Yancheng Runping water supply equipment.

The company is located at the southwest gateway of Yancheng City, Jiangsu Province. It is adjacent to the Shenhai Expressway in the east and the Yanxu Line of the Beijing-Shanghai Expressway in the south. The geographical location is superior, and the transportation is convenient.

The integrated prefabricated pumping station is a common equipment that provides potential energy and pressure energy for water through pumps to solve the problem of drainage, irrigation and sewage discharge under the condition of no self-flow. The function of the integrated prefabricated pumping station is to collect waste water below the liquid level of the waterway through the sewage tank, as well as the waste water discharged away from the municipal sewage pipe network and sanitation facilities, and transport the sewage to the sewage pipe network with the help of the lifting of the sewage pump. It is mainly used in the construction of sponge cities such as flood control and drainage, river restoration, black and odorous water treatment, and rainwater collection and utilization.

Summary. Hello dear, the following <> for your expansion

The functional characteristics of the remote measurement and control terminal of the integrated pumping station: 1. The measurement and control terminal is installed in the drainage pumping station to monitor the liquid level of the sewage pool; monitoring of sewage flows; Monitor the start-stop status, control mode, voltage, current, and protection status of the pump; monitoring security alarms and inspections; Monitor harmful gas concentrations. 2. Support manual control, automatic control, remote control of the start and stop of the drainage pump of the pump starting equipment, and support remote switching control mode.

3. Intelligent control of the rotation of drainage pumps to achieve balanced wear of all pumps.

How much is the integrated prefabricated pumping station.

Hello dear and happy to answer your <>

The integrated prefabricated pumping station is: 1000 yuan. 1. The selection of materials and the thickness of the cylinder.

The ** of the FRP cylinder dust reed body is naturally much lower than the price of the 304 stainless steel cylinder. 2. The selection of water pump materials and the loss of pump manufacturers. Imported water pumps, that ** is naturally much higher.

3. Selection of grille.

Hello dear, the following <> for your expansion

The functional characteristics of the remote measurement and control terminal of the hail hood integrated pumping station: 1. The measurement and control terminal is installed in the drainage pump station to monitor the liquid level of the sewage pool; monitoring of sewage flows; Monitor the start-stop status, control mode, voltage, current, and protection status of the pump; monitoring security alarms and inspections; Monitor harmful gas concentrations. 2. Support manual control, automatic control, remote control of the start and stop of the drainage pump of the pump starting equipment, and support remote switching control mode.

3. Intelligent control of the rotation of drainage pumps to achieve balanced wear of all pumps.

Summary. Different manufacturers, different materials, different technical parameters, etc. all directly affect their differences. At present, the integrated sewage pumping station on the market is about 100,000 yuan, and the first in different regions is also different, the first in Beijing is about 120,000 yuan, and the first in Henan is about 80,000 yuan; ** in Hebei is about 100,000 yuan; ** in Shandong is about 110,000 yuan, ** in Anhui is about 90,000 yuan, etc.

The difference between the integrated sewage pumping station and the imitation of the wheel jujube is very large, from tens of thousands to tens of thousands. But this is not a premium, nor is it the so-called regional price difference, but a real product, because the market is there.

Different manufacturers, different materials, different technical parameters, etc. all directly affect their differences. At present, the market of integrated sewage pumping station is about 100,000 yuan, not the same area is also different, Beijing is about 120,000 yuan, Henan is about 80,000 yuan; ** in Hebei is about 100,000 yuan; ** in Shandong is about 110,000 yuan, and ** in Anhui is about 90,000 yuan, and Gaoshengtai is destroyed.

There is also freight is also an important nuclear noise factor affecting the buried integrated sewage treatment equipment. The equipment has the characteristics of large volume, large weight and difficult transportation, and the customer is far away from the equipment production and regeneration, which increases the transportation of the equipment.

Summary. It is a lifting equipment for lifting sewage, rainwater, drinking water and wastewater, which is transported to the site for installation after unified production and assembly by the factory. The pumping station is buried, and the main body of the pumping station is composed of parallel cylinders, submersible pumps, coupling devices, pipelines, valves, liquid level sensors, control systems, grids and ventilation systems.

It is a new type of integrated pumping station equipment that is easy to use, reliable in quality, less in civil engineering, short in construction period, easy to install and low in cost, and has become a new pumping station construction development trend in the domestic municipal industry.

The difference between the integrated pumping station is very large, and the difference between the cheap and expensive ones with the same specifications is about 300,000 yuan. The medium ** of your hand source specifications is between 40-500,000 yuan, including transportation and commissioning costs, excluding the cost of installation and foundation pit.

It is to lift sewage, rainwater, drinking water, waste water lifting equipment and grinding equipment, nuclear bucket by the factory unified production and assembly after transportation to the site for installation. The pumping station is buried, and the main body of the pumping station is composed of parallel cylinders, submersible pumps, coupling devices, pipelines, valves, liquid level sensors, control systems, grids and ventilation systems. It is a new type of integrated pumping station equipment that is easy to use, reliable in quality, less in civil engineering, short in construction period, easy to install and low in cost, and has become a new pumping station construction development trend in the domestic municipal industry.

The prefabricated rock was completed in the wide positive rock of the factory, which greatly shortened the construction period of the project. The integrated prefabricated pumping station is composed of wellbore structure, internal facilities and other external facilities, and the main body of the pump is to include pumps, valves, pipelines, cylinders, control equipment, repair service platforms, instruments, etc., with a high degree of integration, ensuring the reliability of system operation and reducing project investment costs.