What should I do if my iphoneSE gets water?

Well, if you turn off the iPhone SE immediately under the nickname of water ingress, and then go to the after-sales service for collection and processing, don't deal with it yourself, otherwise the phone will not work.

In this case, if your mobile phone gets into the water, I suggest that you can use the protective film to get it and put it in the rice tank, and then if it really doesn't work, you can still take it and repair it in the mobile phone store.

Hello, your iPhone is flooded, first wipe the water on the screen with paper, and then put the phone inside the rice to absorb water.

Fish it out of the water as fast as you can (fast, every second) and turn off your iPhone immediately. Press and hold the power button until it turns off.

Remove all shells right away, as they will trap moisture. The screen protector can be left unpeeled unless you see visible blisters inside.

Dry your iPhone with a cloth, as dry as you can, you can wipe the screen, sides, and back with a cloth (t-shirt, socks, etc.) or absorbent materials. Pay special attention to the power buttons, volume buttons, mute switches, speakers, microphone, and audio output jacks, and try to wipe all visible moisture as much as possible.

Contact the after-sales center immediately for free inspection and repair.

If the mobile phone enters the water, turn off the power as soon as possible, and turn off the mobile phone to ensure that the water will not damage the running hardware. It should be dried in time, don't turn it on at the time, wait for a day to turn it on.

1.Quickly scoop out your phone.

Whether you drop your phone in the sink, toilet, or pool, the first priority is to get it out quickly (although a disgusting toilet may make you hesitate). Keep in mind that the shorter the time your phone is in the water, the more hope there is of survival.

2.Shutdown.

After removing the phone, turn it off immediately, this is to prevent further damage to the circuit board.

3.Dry it instead of blowing it out.

When the phone is completely turned off, it's time to move on to the next step. If your phone can open the back cover, then to remove the SIM card, SD card, and battery, you can use a soft cloth or cotton swab to erase some obvious water stains; Remember, don't try to blow it with a hair dryer, hot air has the potential to accelerate damage to the phone's internal components.

4.Place the phone in rice or silica gel desiccant.

It is not a legend that rice can save mobile phones, because rice can effectively absorb water, so it is feasible to bury mobile phones in rice. Of course, if you have a silica gel desiccant, it is also feasible to put the phone and the desiccant in a plastic bag at the same time. To ensure that the moisture is completely removed, it is best to leave it for about three days.

5.Boot test.

If you are sure that the phone is completely dry, then you can try to turn it on and run it, and if everything is fine, you need to observe for a few days, because there may still be unevaporated moisture inside the phone, which may slowly corrode the electronic components.

If the machine is brand new, the mobile phone is better sealed, and it will not have much impact if it is taken out immediately after falling into the water. Because the iPhone itself also has many waterproof and moisture-proof designs:

1. The sealing and anti-drop performance of the mobile phone case.

The anti-drop performance of the mobile phone is not good, which can easily lead to the poor sealing performance of the mobile phone case, which directly affects the waterproof and dustproof performance.

2. Sealing of the interface.

The internal interface of the iPhone, such as the earphone port and the charging port, is sealed with waterproof silicone.

4. Moisture-proof treatment. The circuit capacitors, component connections, and wiring of the motherboard are waterproof.

Therefore, after the mobile phone is turned off immediately after water ingress, only the battery is in contact with the water, and the battery is most likely to be damaged.

But this is only a precautionary measure, and can not fully achieve the function of waterproof, for example, the mobile phone has been disassembled, dropped, the mobile phone is not well sealed, not to mention falling into the water, that is, it is easy to get damp and water in rainy days, causing damage to the circuit or components. It is recommended to quickly shut down the machine after water ingress and do the necessary drying treatment.

1. Shut down at the fastest speed. Make sure that you should never try to turn on the computer before drying, because under normal circumstances, the water may not come into contact with the circuit after the water is entered, and the moisture may cover the entire surface of the motherboard after that, and the power will directly burn the circuit and components.

2. Use a dry paper towel to remove the moisture on the surface of the mobile phone, the earphone jack and the charging hole.

Use a toothpick to gently poke a small amount of paper towel into it, and then use a toothpick to buckle it out, do not draw the paper towel directly to prevent the paper towel from breaking in the interface. It's best to wipe it a few more times.

3. Drying.

Put the phone screen down, put it on the table, and use a hair dryer to cool down, blowing the back and surroundings of the phone. Blow for about 2 minutes at a time, not for a long time, so as not to damage the shell due to excessive temperature. Blow again after about ten minutes, preferably a few more times.

4. Pumping treatment.

Wrap the phone in a dry paper towel, put it in a sealed plastic bag, and then put it in the refrigerator for about 2 hours (the popsicle box has the function of pumping internal moisture, and after the fresh meat is frozen for a period of time, it is cut, and there is basically no water inside, but the surface is a layer of ice). Do not leave in the freezer, it will damage the element. After taking it out, after a period of time, you can continue to dry it with a hair dryer.

If the phone obviously feels water, remove the moisture, and after drying, do not try to turn it on, and take it to a professional maintenance personnel to deal with.

In fact, the main thing is prevention. Adding a drop-proof and waterproof shell to the mobile phone can effectively protect the sealing performance of the mobile phone, and at the same time, it can also enhance the waterproof performance of the mobile phone and minimize the external losses.

If the mobile phone accidentally gets into the water, you can try the following ways to deal with the mobile phone urgently to avoid secondary injury:

1. Please take the mobile phone to a dry and ventilated place as soon as possible, and use a dry paper towel or towel to blot the water stains on the surface of the mobile phone.

2. If the phone is turned on, press the power button to turn it off; If your phone is turned off, don't try to turn it on.

3. Please remove the SIM card and microSD card as soon as possible.

4. Please bring your mobile phone to the after-sales department of the mobile phone brand for testing and processing as soon as possible to avoid unnecessary losses.

2. Please do not bake with a hair dryer or stove after water ingress, so as to avoid liquid flowing into the inside of the mobile phone and damaging the mobile phone at high temperatures.

3. Some mobile phones can be turned on and used normally after simple treatment, but the mobile phone is composed of precision electronic components, and there is a hidden risk after water ingress, so it is recommended not to try to turn it on.

4. During the after-sales maintenance process, the data may be lost, it is recommended to ask the staff how to back up the data.

1. Turn off the mobile phone immediately after it gets water. If possible, the battery should be removed. Drain the drain upside down, then use absorbent paper to blot the visible water dry.

2. After absorbing the water on the surface of the mobile phone, then put it in a sealed bag with rice, place it in a cool, ventilated and dry place, and let it stand for more than 24 hours. If possible, it can also be put into the drying oven for drying treatment.

3. Then turn on the machine, if there are still problems, it is recommended to send it to the official after-sales service center, and the engineer will help check and deal with it.

It depends on the situation, and there is generally no fixed program.

It can be repaired, but the following measures should be taken immediately after the water has entered:

1. Do not shake the fuselage when it is turned on.

Once your iPhone gets water, it should be turned off immediately. Keeping the computer on in the case of water ingress will form eddy currents, cause short circuits, and the motherboard will burn out. So never turn it on.

2. The first thing to do after shutting down.

After shutting down, first wipe off the water on your phone's case with a towel. Then quickly unplug the SIM card and keep it somewhere else. Next, use a paper towel to suck up the water from the headphones, dock and SIM card slots.

How to deal with water in the apple mobile phone, how long can it be turned on.

If the sun is good and you handle it cleanly, half a day to a day!

1. First of all, you should turn off the phone directly (take the battery if other mobile phones can remove the battery) to prevent short circuit; At the same time, it is necessary to remove the SIM card so as not to lose the contact information. The longer it stays in liquids, the more damage your phone will suffer for life.

2. See if the "water damage sensor" is discolored. The "water damage test strip" is a white dot near the battery box, and if it has turned red, the customer service staff knows that it is not a problem with the quality of the device, but that you have used it improperly and caused the damage due to water ingress. So don't expect repair and insurance, pay for your own phone repairs.

Of course, the above methods are only suitable for mild water ingress or inconvenient repairs (such as water ingress at night, for example, there is no maintenance point nearby), and it is recommended to send it directly for repair in other cases.

1.Do not try to turn on the device immediately if there is water ingress. Because the iPhone has a built-in battery that cannot be removed, the motherboard will be short-circuited if it gets into the water, and if it is turned on, the motherboard will be burned, causing irreparable consequences.

2.You can first use toilet paper to dry the water outside the mobile phone, and then place the mobile phone screen horizontally to prevent water from flowing to the motherboard, and then use a blow dryer to dry the water, and turn on the temperature at medium or small temperatures.

3.Wipe down the circuit board with anhydrous alcohol and try to turn it on. Because alcohol volatilizes quickly, the moisture on the circuit board can be volatilized clean.

4.Send it to a repair center for repair as soon as possible. If the motherboard is severely corroded over time, it will cause irreparable consequences.

5.Make an appointment in advance for after-sales repair to waive the mobile phone cleaning fee of 299 (limited-time event).

That's a complicated question! Let me tell you that mobile phones are the most water-feared appliances in electronic products! As long as the water enters when the machine is turned on! It's basically unusable! I have experience! Already tried! Let's go to a repair shop to get it repaired! You try it!