What chassis does Weconex P55 use? What chassis can be used with Intel P55?

It's not good.,Look at the answer to the answer to ask this.,It's definitely not a senior garbage guy.,P55 motherboard because of the two tosses and short sales period of the picture bar There are not many motherboards that can still be used now.,Unless you have a European gas possession or don't think about it ('ω'There are still some x79, but the good ones are expensive (more than a thousand), if you don't have the money, you can try the South China gold medal dual-way x79 (single-channel x79 may be the h61 chipset hard change). It's that x79 is a little more stable than p55 is not much stronger, if the answer is rich, feel free, but be prepared to overturn.

As long as it depends on the specific situation, under normal circumstances, the chassis he uses is a universal model, which can achieve a very good effect without any problems.

Generally speaking, the chassis he uses is about 5 mm 5 mm, and it is more compatible with this case.

Replace the graphics card, 460 768MB or SE, or even 5830, 5770, and even add 6850 5850 460 1G is better than this thousand-yuan GTS450.

As long as the card isn't extended, a standard (ATX and M-ATX) chassis will certainly fit. However, there is already a GT550 to replace the GT450, so it is recommended to chase the new!

This is generally a sign of a large buffalo that is relatively good.

What kind of chassis is used for Weconex Dirty Five? Because you can use a normal chassis.

I'll take a look at it for you, and this case in your case refers to this case of 78mt.

Win G May May what chicken next you dang outside the signs.

You can match such a pit chassis in the relevant computer company, it should be relatively good, it is a very easy to use one.

For this kind of case, you'd better use a regular one.

If you use this thing, I think it's better to use anything, and you can use anything with this thing, it doesn't matter.

Generation Intel CPUs, such as i3 530 540 i5 750 i5 760 i760 i7 860 i7 870 1156-pin CPUs.

There is definitely no brand new with a warranty, you can only find second-hand ones.

Just get the screws ready.

Install the power supply to the chassis, motherboard, hard disk, optical drive, memory, CPU (including fan), data cable, power cable, and cable on the front bezel of the case.

CPU 1 1385 Intel Core i5 750 box.

Motherboard 1 999 Weconex Bluepai P55

RAM 2 295 ADATA 2G DDR3 1333 (Wan Zi Qianhong).

HDD 1 680 Seagate 1TB SATA2 32M (

Graphics card 1 999 Dilan Hengjin HD4870 Fire Diamond Edition.

Burner 1 198 LG GH22NS50

Display 1 1199 AOC 2430V+

Chassis 1 298 Oriental City Kakale Iron Knight (710).

Power supply 1 408 Great Wall Dual Card King 500se

**Total: 6756 RMB.

Considering that LZ is just for normal use, non-overclocking maniacs, and the U-belt turbo function will be automatically overclocked, so there is no need for a first-line board, ** false height, Weconex's blue P55 is also not bad, 14 phase power supply.

Memory 4G is enough to cope with Win7.

In terms of graphics cards, you can already use 4870 or GTX260+ to eat basically all games. In fact, I also have a small suggestion.,Just spend 599 to buy a 4830.,You can play cool games.,Save money.,Buy 5850.,Of course, if the LZ budget is enough, you can go directly to it.,It's just that the 58xx card is still **inflated.。

The power supply with 4870 is enough, the power consumption of 5850 is well controlled, and the power supply of 400W is also enough.

The monitor is selected as a 24-inch one, which is very comfortable to watch movies, and the dot distance is only slightly smaller than the 22-inch 16:10, which can be considered. But the display is still recommended to LZ to see the scene and then consider,After all, the actual display effect still depends on personal subjective judgment。

Intel Core i5 750 (Case) 1 1390*Motherboard GIGABYTE GA-P55A-UD3R 1 1499*RAM Kingston 2GB DDR3 1333 1234 310*HDD WD 500GB 7200 to 32MB (Serial GP) 1234 345

Graphics: Ӣ GTX260+, Admiral 1234 1099, Sound 1

Optical drive Pioneer DVR-118CHV 1 189 LAN 1

crt 1 ￥

LCD Samsung T220 1 1450

Chassis Cooler Master Destroyer RC-K100 1 299 Power Supply Kangshu iPower 510W 1 499 Mouse 1

Keyboard 1

Keyboard & Mouse Logitech G1 Gaming Keyboard & Mouse Combo 1 185 Speaker 1

Radiator 1

Operating System 1

Office Software 1

Total amount: 7575 yuan.

High-end boxes around 800-1300.

First of all, if you have a good budget, depending on your needs, you need an ITX small box, a mid-tower box for playing games, or a water-cooled box.

The 600T and 650D of the Corsair are all classic, and the FT02 of Yinxin is high-end and high-grade.

There is also an all-aluminum box from Lianli, which I personally like.

There is no best, only better... At this price, it's still a silver crow.

This depends on the specific situation, for example, if you want to have a computer dedicated to playing games, then the chassis should also be part of the cooling system, there are many for this type of chassis, Cooler and TT are good. If it is used to put it in the living room, then it is better to find a small case with a more home-like appearance, because this kind of case does not have high requirements for heat dissipation.

The P55 motherboard usually uses DDRII memory, and the P55 itself supports dual channels, which is a bit of a waste of the advantage that DDRIi can take three channels, but it doesn't matter.

The installation steps are as follows:

1) Open the case.

2) Remove the dust accumulated in the memory slot to ensure that the memory slot is clean.

3) Break the white (some motherboards will use other colors) clips on both sides of the memory slot.

4) Open the memory package, (before touching the memory, it is best to touch the metal objects that can be grounded, such as water pipes, heating pipes, etc., to release the static electricity on the body, wear anti-static gloves and anti-static bracelets if possible), hold both ends of the memory module in one hand, and do not touch the memory particles.

5) According to the position of the memory gap and the memory slot notch, align, gently force, insert, hear the "click" sound of the clips at both ends, that is, lock, the installation is successful.

6) Close the case cover.

The whole process pays attention to anti-static and anti-falling.

If you need to turn on dual channels, you need at least two types of memory, and the brand, model, and batch of memory should be the same as possible.

It is estimated that there is a problem somewhere on the motherboard, you clean the motherboard and try, if not, open the side cover of the case, you can find the same as the CPU fan socket at the bottom left of the motherboard, extend the fan cable and plug it there!The motherboard is marked with CPU socket next to CPU 1 and CPU 2 at the bottom left

I don't remember exactly!

If you don't feel safe, it is recommended to use Master Lu to monitor the temperature, or monitor it in the motherboard BIOS!

The correct solution of the top floor.

The video memory of the integrated graphics card generally uses the system memory, that is, a part of the memory memory is divided into the middle of the memory module you plug into the motherboard as the video memory, and the amount of partition can be set in the middle of the CMOS. Motherboards that solidify their own memory are very rare.

You can use a larger chassis bureau!There is no need to pursue any brand model!I think it looks good, and the workmanship is good, and the current chassis can meet your heat dissipation!

This configuration does not belong to a large power consumer, and any case is fine, as long as you look comfortable.

This configuration is very good, and there is no need to change the motherboard to a P55 motherboard.

The P55 motherboard is too expensive, and for the average user, there is not much difference between the P55 and H55 motherboards.

So this configuration is very goodP55 does not come with integrated graphics, H55 does.

GTA4 is perfectly fine, very smooth.

Beautiful chassis, I recommend you a few.

Cooler Master SWAT 430 (RC-430-KWN1) 329 This chassis looks handsome and is of good quality.

Kanegawada Bamboo Painting (Chinese Style Series) 299 This case is white.

And there is a Chinese painting of bamboo painted on it, which is quite beautiful.

Big Buffalo x3 289 This one is not bad either.

CPU Intel Core i5 760 (scattered) 1305

Motherboard Gigabyte GA-H55M-S2 599

Memory: ADATA 2GB DDR3 1333 x2 270

HDD WD 1TB 7200 to 32MB (Serial WD10EALS) 385

Graphics: ZOTAC GTX460-1GD5 Destroyer 1399

lcd aoc f22s ￥ 880

Chassis Kaneda Bamboo Painting (Chinese Style Series) 299

Power supply Cooler Master Tomahawk 400 (RS-400-PCAP-A3) 269

Radiator Overclocking III Red Sea Extreme Edition 200

Total amount: 5,606 yuan.

Power supply: I recommend you to use a 450W active power supply.

The GTX460 consumes quite a lot of power.

Descendant Black Charm (BTX-450-1) 298

antec vp450p ￥ 339

Huntkey Multi-Core R85 (New Version) 499

Recommended.

About 200 yuan, I don't know if the Alsace case can be bought. Alsace is recognized as a case with good heat dissipation.

The configuration is average, I think your i3 is not good to choose, you should choose i3-530 generation i3 is better than the 2nd generation i3, stable.

The case is a little larger one, and it is not recommended that you use the expensive one, which is a bit extravagant.

Recommend these three models below 300 yuan, not an advertisement, but I feel good when I buy it. I use the saboteur, when I bought the empty box 260 yuan, it is recommended to buy it must be slashed with the merchant, the chassis is very profitable, ** online shopping is only about 200 yuan, but the freight is too high to calculate the same, I bought it when I installed it. These three cases are promoted by Cooler Master for the low-end market, but the workmanship and quality are relatively good.

Cooler Master Destroyer RC-K100

Cooler Master Saboteur RC-K200

Cooler Supreme Arbiter.

The entire front panel of the case is designed with a metal perforated mesh, which effectively increases the air intake at the front of the case. At the bottom of the front panel, there is a 12cm fan slot, which is paired with the original 12cm fan of Cooler Master. The back of the case is also designed with a 12cm fan reservation, but there is no fan, with the cooperation of the front fan, the case can form a stable air duct, which is more conducive to the heat dissipation of the case.

The side of the chassis is designed with CPU and PCI-E equipment ventilation holes, and the CPU air deflair cover is also installed inside (I used the tower CPU radiator to remove it from the obstruction), the chassis is made of SECC galvanized steel sheet, and the interior adopts a full curling design, and the edges around the chassis are designed with rich EMI contacts, after the case side panels are closed, these contacts can connect the chassis body and side panels as a whole, thus forming a closed metal environment and shielding harmful electromagnetic waves. The chassis is equipped with a total of 7 PCI-E expansion slots, 3-inch mounting slots, and is equipped with tool-less fasteners for hard disks and optical drives, rubber feet at the bottom of the case, and two water-cooled pipe entrances and exits on the back of the case for users who need water cooling. The rubber pad holds the tube in place.

The arbiter is the largest in these 3 cases,The other two are about the same,I didn't look carefully at the results when I bought it, and I went back to know,When I installed the CPU fan, the buckles were all on the power supply,If you change the arbiter, there should be no problem。 For specific information, please ask this friend to go to ** to check it, and see** is more intuitive. When I bought this case, I was also thinking about workmanship and heat dissipation, and then mute, I was also on the 9800GTX+ public version, standby 50 degrees is really terrible, I hope you can find the right case with such a high-end machine as yours.