Can the dry cleaner be drained when distilling?

Whether you can put the drain valve during distillation means that the perchloroethylene dry cleaning machine has a small steam generator built into the bottom of the distillation chamber.

If the distillation button has been opened, it is not possible to open the drain valve, because in this case, the electric heating rod of the generator will be dry burned, which will directly cause the electric heating rod to burn out.

If the distillation switch is turned off, the drain valve can be opened. But if it's boiling water, be careful, the steam will come out.

The reason why the dry cleaning machine does not drain liquid: This is because the outlet valve A10 is not opened. Open the air cover and reset the A10 clip of the terminal block. Be sure to reset the A10 after each drain from the dry cleaner.

Hello dear, glad for your question. The solutions to the dry cleaning machine distillation too slow are as follows:1

Check the water source: The distillation speed of the dry cleaning machine is related to the water quality of the water loss Li Duanyuan, and if the water quality is not good and the water flow is insufficient, the distillation speed will be slowed down. Therefore, it is possible to check whether the water source is normal and if the water quality is not good, the water source can be replaced.

2.Check the power supply: The distillation speed of the dry cleaning machine is related to the power supply voltage, if the power supply voltage is unstable, it will cause the distillation speed to slow down.

Therefore, you can check whether the power supply is normal, and if the voltage is unstable, you can replace the scrambled fiber power supply. 3.Check the device:

The distillation speed of the dry cleaning machine is related to the quality of the equipment, and if the equipment is aging or malfunctioning, it will cause the distillation speed to slow down. Therefore, it is possible to check whether the equipment is in good working order, and if the equipment is aging or malfunctioning, the equipment can be repaired or replaced. 4.

Adjust the operation: When using the dry cleaning machine, you can adjust the operation appropriately, such as adjusting the temperature, time, etc., to increase the distillation speed. At the same time, the number of distillations can be increased to achieve a better dry cleaning effect.

Do you have any questions? If my answer is helpful to you, please also give a five-star review (in the bottom left corner), your efforts are important to me, and your support is also my motivation for progress. If you feel that my answer is still satisfactory, you can click on my avatar for one-on-one consultation.

Finally, I wish you good health and a good mood! <>

If my answer is helpful to you, please give me a five-star review (in the bottom left corner), your efforts are important to me, and your support is also the motivation for my progress. If you feel that you are satisfied with my answer, you can click on my avatar for one-on-one consultation. Finally, I wish you good health and a good mood!

1) The distillation cooler of the dry cleaning machine is blocked, so it needs to be removed, and then the blockage is solved. (2) If the trap of the dry cleaning machine fails, then it should be repaired or replaced in time. (3) The distillation cooler of the dry cleaning machine is blocked, so it needs to be removed, and then the phenomenon of cracking and clogging is solved.

4) If the steam inlet valve of the dry cleaning machine equipment cannot be opened to the U position or cannot be opened, then it should be repaired and replaced in time. (5) When the cooling water is insufficient or the cooling water solenoid valve has a call to close fault, there will be a failure, what needs to be done is to maintain the cooling water pressure, and in case of damage, the cooling water valve needs to be replaced.

If my answer is helpful to you, please give me a five-star review (in the bottom left corner), your efforts are important to me, and your support is also the motivation for my progress. If you feel that you are satisfied with my answer, you can click on my avatar for one-on-one consultation. Finally, I wish you good health and a good mood!

Summary. Hello, I am sorting out the answer for you, please be patient.

Hello, I am sorting out the answer for you, please be patient.

Hello, first of all, it depends on whether you are an open machine or a fully enclosed machine If it is a fully enclosed machine, then put the liquid you need to distill into the distillation box, and then start the car section of this distillation and boil the cooling water after boiling.

I have been steaming since 9 o'clock in the morning, and until now, the oil in the steaming tank still feels so much, and there is no less.

This kind of thing. There are many reasons why the distillation time and temperature are not reached, or the pipes are blocked, or there is a leak under the separator.

The inside of the steaming tank has been boiling, how can you tell what the problem is?

It is very likely that the pipeline is blocked, and it is recommended to find a professional to take a look.

Summary. There is too much sediment inside the retort tank.

Dry cleaner distillation is too slow, drop by drop.

There is too much sediment inside the retort tank.

Affects the conduction of heat pro.

My dry cleaner is taking too long to steam! The oil steamed too slowly, and the liquid-water separator appeared half blue.

Yes dear. It is recommended to wash it.

I dug up the sediment today.

What now. Just as slow.

I cleaned it up.

Wash off with soapy water.

The blue hair is the same.

Wash it and it's on it, pro.

Dear, hello Ya, usually the distillation of the electric heating dry cleaning machine needs to carry out the following steps: 1Prepare the distillation equipment:

Electrically heated dry cleaning machines, evaporation dishes, cooling pipes, condensers, etc. 2.Kiss, put the substance that needs to be distilled into the evaporation dish, and then put it in the electric heating dry cleaning machine.

3.Turn on the heating switch of the electrically heated dry cleaner to allow the material to evaporate. 4.

Connect the cooling pipe and condenser to the outlet of the electrically heated dry cleaner, and place the other end of the cooling pipe and condenser in the sink separately <>

5.The evaporated gas enters the cooling pipe, where it is cooled by a condenser and finally becomes a manuscript liquid. 6.

The distilled liquid is collected into a container. Tips: Dear, during the distillation process, the heating temperature and evaporation rate should be controlled to avoid the decomposition or volatilization of substances too quickly. In addition to electrically heated dry cleaning machines, distillation also has its own blind methods, such as steam distillation, vacuum distillation, etc.

Distillation is a commonly used separation and purification technology for grinding Jingnu, which is widely used in chemistry, biology, medicine and other fields. The above is mine, I hope it will help you, I wish you a happy life and a happy day