CF didn t turn the black bars up and down?

1.At the start of the run enter regedit to open the registry.

2.Navigate to hkey local machine---system---controlset001---control---graphicsdrivers---configuration

3.Then right-click on configuration, select Search, enter scaling, you can see scaling in the right box, right-click scaling and select modify, change the value to 3, the original value is 4

Note! If there is no control option in your controlset001, please do not worry, look for it in controlset002, controlset003, controlset004 below, and repeat the steps of controlset002, controlset003, controlset004.

It should be possible to follow this method, and the same is true of one of my relatives' family, so it will be fine.

Enter the game first, then press the settings in ESC to exit, and there is a page at the bottom with the brightness set to 100. That's it.

Tune to full screen Generally, playing through is full screen play.

It's win7. Basically, you have to adjust.

The useless one on the first floor? That's no way, hee-hee.

Tell me what system, and the graphics card is a or n series.

Isn't there something magnetic next to your machine?

How to transfer it back and how to transfer it back, although I can't either.

Here's how to fix it:1. First of all, make sure that there are black bars on the left and right sides, as shown in the figure below

2. Press the win+r key and enter regedit, as shown in the figure below

3. Select Configuration in turn, as shown in the following figure

4. In the folder.

Right-click on and select Find, as shown in the following figure:

5. Enter scaling in the search target and press enter.

As shown in the figure below:

6. Modify the numerical data in the page from the initial 4 to 3, as shown in the following figure

7. This can solve the problem, as shown in the figure below

Adjust the resolution, try to adjust the resolution more, start the game for testing every time you make adjustments, and if it can be displayed normally, you don't have to do the following scheme.

Starting from the graphics card driver, sometimes the graphics card driver will also appear abnormal when it is too old, upgrade the graphics card driver to the latest, or refer to the official website to upgrade the graphics card driver according to its requirements, and then enter the game to test whether the display is normal.

Adjust the picture to the lowest special effect, and then enter the game test, the lowest effect is OK, and then gradually adjust it upwards until it is suitable for the best display effect of the machine.

It is also possible to reinstall the game and reinstall the system, which is a backup solution that none of the above solutions can solve.

If your graphics card is an N-card, do as follows:

Win10 desktop right-click.

Open the NVIDIA Control Panel.

Display. Adjust the size and position of the tabletop.

Tap Full Screen. Dot Tick overrides the zoom mode set by the game and program.

Click Apply and that's it.

There is a black bar under Crossfire.,Maybe it's the stability of the resolution.,Change the resolution in the game settings.,Choose your own suitable one.,Change a few more to see.,No, then you have to update the graphics card driver.。

This is normal: some games don't natively offer widescreen resolution support. The graphical interface is all based on a certain scale (e.g., 4:

3) to design. So, on a widescreen monitor, it's no surprise that there are black bars on both sides to keep the graphic in the right aspect ratio.

Infiltrators: No one knows exactly who created the Infiltrator Mercenary Company, or where its headquarters are located. Some say it served Third World countries, while others claim that it had carried out "special missions" for rebels. So far, however, no one has found the person in charge of the company, and there is not even any law that can bind it.

But at least one thing is clear to everyone: lurkers never serve the powerful. It is said that the members of the lurkers have wild blood flowing in them - which makes them willing to serve weak and small countries, and even perform certain "special services".

But to outsiders, everything about them is just speculation.

There should be some buttons on the side of the display that can be adjusted,There may be a panel popping up or something,You can adjust the contrast and brightnessThe position of the screenAh (it's called a clock on my computer),Tune it yourself.,After playing the game, you can turn it back or change it to a window or something.,But after all, I'm not in your house.,I can't teach you by hand.,Explore it yourself.,It's not difficult.。

Hello,Can you upload**Explain?,Thank you for the detailed description of the picture.。

1. Turn on the computer, on the computer desktop, use the right mouse button to select the graphic properties.

2. After coming in, you will see 6 options, select the monitor.

3. Then select Zoom Full Screen at the bottom, and overlay the app settings at the bottom.

4. Select the application in the lower right corner, and then re-enter the cf (Crossfire), and you can see that there are no two black bars.

5. Re-enter the game and see if there are no two black bars.

Method 1: Change the graphics card property settings to achieve the full-screen effect of the game.

Generally, after installing the nvidia graphics card driver, it will come with a graphics card setup program to the system, which can be found in the control panel and the desktop right-click menu properties, right-click the desktop right-click to find the "nvidia control panel", as shown below:

Then select Adjust desktop size and position, and apply the full-screen settings.

Method 2: Modify the registry to solve the problem that the full screen cannot be displayed.

1. Click --- run in the lower left corner - Start --- enter: regedit---OK.

2. Click: hkey local machine folder, and then click: system folder.

3 Click the image to find the system--controlset001--control folder.

4. Then click the image to find graphicsdrivers--configuration

5. Right-click on configuration, select Find, enter scaling, and click Find Next.

6 Right-click scaling, select Modify, change 4 to 3, and finally click OK.

win+r, open the run window, enter regedit enter, so that the registry is opened, and then, locate to the following location: hkey local machine system controlset001 control graphicsdrivers configuration Right-click on the configuration, select Find, enter scaling, Find scaling in the right box, right-click scaling to modify the value to 3 (the original value is 4), this method basically kills the full-screen problem of all games under windows7. If the above methods don't work, you can also try:

Nvidia graphics card games can't go full screen.

To solve the problem that the game cannot be full-screen under N stuck in Windows 7 (XP is the same), the specific steps are as follows: 1. Select "NVIDIA Control Panel" 2. Select "Display" on the left side - change the scale of the flat panel monitor "3. Check "Use NVIDIA zoom function". After setting it up in this way, try to play the game, and you can basically solve the problem of the full screen of the game.

AMD ATI graphics card games can not be full screen issue.

A card users also encounter the problem of full screen of the game, except for the 1024 768 resolution, use any resolution to enter the game full screen mode, there are black bars on both sides of the screen, the solution is as follows: First: make sure you are using the latest graphics card driver, enter the graphics card settings center, and select the "Configure" option.

Then: Tap the "Properties" button, change "Keep Aspect Ratio" under "Zoom Options" to "Full Screen", and click the "OK" button. Again:

Enter the screen resolution setting interface and set the resolution to the normal resolution of your screen (for example, 1366 768 or 1440*900, etc.). Whether it is an N card or a card, the problem that the game cannot be played in full screen under win7 is generally caused by the resolution, so we can control the resolution of the screen to solve the problem that the notebook can not play in full screen under win7.

Summary. Hello, if your notebook plays cf with black bars above and below, then you can try the following solutions:1

Check that your monitor resolution is adjusted correctly; 2.Check if your graphics card driver is updated to the latest version; 3.Check that your game settings are correct; 4.

Try using a different monitor; 5.Check if there is a problem with your graphics card; 6.Try reinstalling the game.

If none of the above methods can solve your problem, it is recommended that you contact technical support in time for better assistance.

Hello, if your notebook plays cf with black bars above and below, then you can try the following solutions:1Check that your monitor resolution is adjusted correctly; 2.

Check if your graphics card driver is updated to the latest version of the sensitive laptop; 3.Check that your game settings are correct; 4.Try using a different monitor; 5.

Check if there is a problem with your graphics card; 6.Try reinstalling the game. If none of the above methods can solve your problem, it is recommended that you contact technical support in time to get better spring demolition help.

How to adjust the resolution.

To adjust the CF resolution of your laptop, first of all, you need to make sure that your laptop supports CF games, and then, you can find the "Resolution" option in the game settings, you can choose the most suitable resolution for you according to your screen size, in general, the lowest resolution is 1024x768, and the highest resolution can reach 1920x1080, you can adjust the resolution of the early rate according to your needs.

Here's how to fix it:1. First of all, make sure that there are black bars on the left and right sides, as shown in the figure below

2. Press the win+r key and enter regedit, as shown in the figure below

3. Select Configuration in turn, as shown in the following figure

4. Right-click on the folder and select Find, as shown in the following figure:

5. Enter scaling and press the Enter key in the search target, as shown in the following figure

6. Modify the numerical data in the page from the initial 4 to 3, as shown in the following figure

7. This can solve the problem, as shown in the figure below

The black bars on the top and bottom of the CF are large in resolution. The resolution needs to be reset.

At present, the entertainment industry is hot, and the game circle is also very lively, many games and other two-dimensional works are filmed into three-dimensional, of course, many times two-dimensional things will hit the street when they are lined up three times, but there are also many successful cases.

Just recently, there was a news about CrossFire and Luhan, the game CrossFire used to be very popular, and it was also a tyrant of Internet cafes at the beginning.

As for Lu Han, it is a very popular little fresh meat in China, with a large number of fans and a lot of fans, however, Lu Han's previous Shanghai fortress seems to have suffered Waterloo, and both word of mouth and box office failed, and now it has taken over Crossfire, and I dare not guess how it will be after the release.