Fenda R50 or Edifier T1600tiii which is better

Fenda R50(better than Edifier 1600).

Parameter: output power 62w=30wx2

Frequency response 50Hz-20kHz(The bass is 50 Hz, which is the best bass in the bookshelf box, there is no frequency response parameter, not HIFI sound quality).

The signal-to-noise ratio is 80db

Speaker, woofer, horn.

Edifier T1600TIII

Parameters: output power 60W

Frequency response 65Hz-20kHz (+-6dB).(The bass is 65 Hz, the bass parameters are not good, the frequency response error is plus or minus 6 decibels, the frequency response error is large, and it is not HiFi sound quality).

The signal-to-noise ratio is 85dba

Speakers: 4-inch woofer.

Both speakers have a 60W output power, which is exactly the same.

With a frequency response, Fenda is a 50 Hz bass and dives better than the Rambler.

The Edifier is a 65 Hz bass, the bass frequency is 15 Hz higher, and the depth of the dive is not as good as the Fenda bass, and the bass is not as good as the Fenda bass.

The Edifier has a better signal-to-noise ratio, because the bass is poor, and the communication is a little quieter.

Speakers with a bass of 50 Hz, the AC sound is slightly louder (50 Hz is the frequency of AC power, without a speaker with 50 bass, there is no 50 Hz AC sound), this is the law of audio, and it is also a normal situation.

To sum up, Fenda has better sound quality than the Rambler, mainly because the bass dive is a little better. Everything else is pretty much the same.

Of course, I chose 1600.,The new sound of the Edifier is good.,And**It's quite kind.。

Is 1800 better than 1600 good? And it's more expensive. Of course, completely from the point of view of cost performance, I think 1600 is very good, 1800 is more piano paint, more power, more expensive, 100 yuan, I will choose 1600.

There are six main technical indicators: frequency response, signal-to-noise ratio, dynamic range, distortion, transient response, stereo separation, and stereo balance.

1. Frequency response.

The frequency range of audio equipment during playback and the amplitude of sound waves as a function of frequency. The frequency amplitude of 1000 Hz is used as a reference, and the frequency amplitude is expressed in decibels (dB) as a logarithm.

The overall frequency response of the sound system is theoretically required to be 20 20000Hz. In actual use, due to the circuit structure, the quality of the components and other reasons, it is often impossible to meet the requirements, but generally at least 32 18000Hz.

2. Signal-to-noise ratio.

The ratio of the sound reproduction sound of the audio source software of the audio system to the new noise generated by the whole system, the noise mainly includes thermal noise, AC noise, mechanical noise and so on. This metric is measured in decibels (dB) as the logarithmic ratio of the rated output power of the playback signal to the system noise output power when there is no signal input. The signal-to-noise ratio of the audio system should be at least 85dB.

3. Dynamic range.

The logarithm of the ratio of the maximum undistorted output power during audio system playback to the system noise output power at static time, in decibels (dB). The dynamic range of a better sound system is above 100 (dB).

4. Distortion. When the sound system replays the source signal, some parts of the original source signal (waveform, frequency, etc.) are changed. Allah in the sound system has the following types: harmonic distortion, intermodulation distortion, transient distortion.

5. Stereo separation.

Stereo separation indicates the degree of isolation between the left and right channels in a stereo system, and it actually reflects the degree to which the left and right channels crosstalk with each other. If there is a large crosstalk between the two channels, the three-dimensional effect of the reproduced sound will be reduced.

6. Stereo balance.

Stereo balance represents the difference in the gain of the left and right channels in a stereo playback system, and if it is not too balanced, the panning of the reproduced stereo will be shifted. Generally, the stereo balance of a high-quality audio system should be less than 1db.

7. DB is widely used in electronics, it is a relative unit for measuring and comparing the magnitude of power, voltage and current of a system.

Impedance, Power, Sensitivity, Frequency Curve, Transient Response, Maximum Distortion, Signal-to-Noise Ratio, and more.

The most important speaker parameter is "frequency response", which determines the ** of the speaker.

For example, the frequency response is 50Hz 20khz, which is the parameter of the general speaker, because there is no subwoofer, and there is no HIFI parameter, ** is not expensive, and you can buy it for 1,000 yuan.

If there is (+3db), it is hifi sound quality, **3000 or more.

Subwoofers, ** more expensive.

For example, the frequency response is 40Hz 20kHz, and the frequency response is at least 3000. 40 Hz is super bass, if it is 30 Hz, it can be more than 7000. The lower the bass, the more expensive it is.

If there is (+3db), it is high-fidelity hifi sound quality, ** more than 10,000 yuan.

It should be noted that only the parameters of brand-name speakers are true and reliable, and the parameters of miscellaneous speakers may be fake.

The others are impedance and sensitivity.

The impedance needs to be matched with the power amplifier to calculate the power.

Those with low sensitivity need to be doubled in power to push well. Around 90db is relatively high, and around 86db is relatively low.

Of the above three parameters, the first frequency response is an indication of sound quality, which is the most critical parameter.

Second, three are secondary parameters and are just power matching and amplifier power selection references.

According to the IEC60581 high-fidelity loudspeaker system standard, there are frequency response distortion and so on, which can be referred to the IEC standard.

Whether it is indoor or outdoor, many times we need a speaker, and the audio equipment is not often contacted by ordinary people, and the choice of brand also makes many consumers very entangled.

First of all, we have to look at the size of the speaker

The general value of the computer speaker depends on the rated power, signal-to-noise ratio and frequency response!

1.If it is used for computers, it is generally used below 100 watts;

2.The higher the signal-to-noise ratio, the less noise there is. Generally, it is 80db, and the high-end ones can reach more than L10db.

3.The higher the frequency response value, the flatter the frequency response curve of the loudspeaker, the smaller the distortion, and the higher the performance. Generally, the frequency response of the speaker is 60Hz-20kHz

There are still many categories of speakers,Bluetooth speakers are widely used,If you want to buy a speaker adapted to the computer, it depends on what kind of effect you want,And are more suitable,The left and right channels are more enveloping,Of course, small Bluetooth speakers can also play well in a limited space,Speakers can be diversified,The sound given by different brands in different forms is also different,For example, the low frequency of the boss is very solid,JBL's vocals are very prominent, Abramtek's low frequency and vocals are very good,Compare it to know,Domestic brand speakers are no worse than those so-called international brands!

There are four main steps to choose, see below for details.

The first step is to look at the appearance. Speakers made from natural wood are of course the best.

The second is to check its weight,Generally heavy audio is better than pro-audio,Because a good speaker is made of red sandalwood,Weasel and other super-heavy solid wood,So it's very heavy。 However, it is necessary to be wary of unscrupulous merchants who deceive consumers by increasing weight in the bottom of the sound body.

Third, it is to knock on the baffles of the speaker, up and down, left and right, front and back. If the sound is deep, sometimes slightly crisp, it means that the sound is better.

The fourth is to look at the famous brand,Really good speakers have a well-made gold-plated or plated nameplate mark,The nameplate is written with a trademark,Company,Name,Origin,Corresponding indicators, etc.。 Import box, also in English.

The sound selection function, what are you used for, audiophiles or simply listening to the simple **, or used to play games and watch movies, according to your needs. If you are an audiophile who listens to **, you can take a look at Huiwei or B&O Danish Crown, Dynaudio B&W, etc., which are all the choices of audiophiles.

If you consider the requirements of sound quality, you can start with the frequency response, signal-to-noise ratio, and sensitivity. The frequency response requires a frequency range of 20-20kHz. The deviation is about plus or minus 1db, and the sensitivity is more than 90db.

The signal-to-noise ratio is still listening, it is better, and it is better to listen in a quieter place. Don't put it, listen to the noise floor is small enough to be about the same. Secondly, consider ** and brand.

Or maybe it's the appearance.

The choice of computer speakers, 1, is not too big, occupy space; 2. It is better to be made of wood, and the sound quality is good; 3. The power should be 28W or above, the bass power is 12W or above, and the signal-to-noise ratio is 70dB; 4. I don't recommend it, at least choose one; 5. Look at your interface.

I recommend one that I use now, and it feels very good. Lenovo S3000

When the sound is turned on to the maximum, it will not pop. I bought one in Wuhan some time ago, and I don't feel like I used it anymore, but I used it at home before, and half of it was broken. But the sound quality is still admitting that the Edifier is good.

The key is to see what shape you personally like. You don't need to choose the sound, just listen to it. Hope you get the speaker you like.

Happy New Year...

The choice of computer speakers mainly depends on two data, frequency response and power. The wider the frequency response range of the speaker, the greater the dynamic range that can be reflected, that is, the better the sound. And the amount of power,Determine how loud you can hear,For example, if you want to listen to dynamic tracks,The loudspeaker will have better performance。

If you don't know how to choose, you can buy Pinyang audio, cheap and practical, use it for a few years, and then buy another bag, you won't lose. It's not good, you can return it in 7 days, and the merchant has a high credit score and is not afraid of being deceived.

There is not much difference mainly to listen to the sound quality.

Choose a speaker, each sound is very clear and distinct, and the whole sound is very three-dimensional, and the effect is a good sound.

The choice of speaker is mainly based on demand,The value is just a reference,The same numerical timbre is also different,You can listen to more。

The sound is three-dimensional, the weight is not important, and the selection is important.

Active speaker: refers to a speaker with a built-in power amplifier.

Passive audio: there is no power amplifier inside, to be connected to an external power amplifier to work these two audio market positioning, and consumer groups are different, in general, the active audio output power is small, the volume can not be turned on very large, the power amplifier is not too particular about the circuit, it belongs to the simple audio system, mostly used in the field of computers. This speaker is generally relatively small.

Passive sound is a formal sound system. It has a lot of power and good sound quality, but it is bulky and takes up space.

It's 1 left channel, 1 right channel, and 2 speakers.

It is on the basis of adding a subwoofer,Because the bass has no directionality,So you can put ** can be a center speaker, two front speakers (3) plus a bass (1) also known as surround sound, more than two rear speakers.

Audiovisual language: the classification and function of sound in film.

According to the use of the occasion: divided into two categories: professional speakers and home speakers. Household speakers are generally used for home playback, which is characterized by delicate and soft sound quality, more delicate and beautiful appearance, less sound pressure level and relatively less power. Professional speakers in general.

2.According to the frequency of playback: it can be divided into full-band speakers, subwoofers and subwoofers. The so-called full-band speaker means that it can cover low frequencies.

3.According to the use: it can generally be divided into the main amplifier speaker. monitors and monitors, etc. The main loudspeaker is generally used as the workhorse of the sound system.

4.According to the cabinet structure, it can be divided into sealed speakers, inverted speakers, labyrinth speakers, sound wave tube speakers and multi-cavity harmonics.

There are two main categories, active and passive.

The world's top ten famous audio systems are Hivihivi, Yamaha, Dr. Yamaha, Dr. Bose, B&W, Harman Kardon, Dynaudio, JBL, ADS0976, Hivihivi, Yamaha The Yamaha brand was founded in 1887 in Hamamatsu, Japan. It started with a high-quality pipe organ and has a long history. As one of the world's largest manufacturers of musical instruments, Yamaha manufactures musical instruments, professional audio equipment, audiovisual products, and semiconductor materials.

With a high level of R&D and a modern factory, its excellent product quality has been highly evaluated, and it occupies a solid position in the global market. 2.Dr. Bose was founded in 1964 by Ph.D., a professor of electrical engineering at the Massachusetts Institute of Technology.

It was one of the world's first speaker manufacturers and was a wholly owned independent company. The OSE voice has a very detailed timbre. Whether it's bass or treble, it's comfortable and not harsh, and the appearance is stylish.

Overall, the doctor's voice is very cost-effective and an innovator in the industry's "acoustic reproduction technology". B&W was born in the UK in 1966. It is one of the best audio companies in the UK and one of the most influential brands in the world.

For many years, B&W has been committed to the manufacture of R&D and loudspeakers and their peripheral products. Clear and pure sound quality, simple industrial design, highly respected by ** enthusiasts and professional recording studios. 4.

Harman Kardon Harman Kardon, founded in 1953 in the United States by Dr. Sidney Harman and Dr. BernerKardon, who love the arts and art, is world-renowned for its home and car audio systems. In March 2019, Samsung completed the acquisition of Harman International for $8 billion. Founded in Zhuhai in 1991, it is the first audio manufacturer in China to specialize in manufacturing high-end loudspeakers.

After 24 years of rapid development, HiviHivi has become a world-class audio manufacturing company, with a wide range of top electroacoustic products well-known in the industry. With its excellent quality and perfect sound, Hivihivi speaker unit has won the favor and adoption of many famous audio manufacturers in Europe and the United States.