Computer Problems: Speaker sound is distorted

If the computer has a sound distortion failure, it can be handled in the following ways——

1. Check whether the latest sound card driver is installed.

2. There may be a problem with the quality of the speaker. Lower-quality speakers tend to be more susceptible to distortion in the bass than higher-quality speakers. If the quality of the speaker is low, only a hardware upgrade can improve the ** effect.

3. The sound distortion may be due to the volume sent to the speaker being too high and beyond the processing range of the speaker, at this time you should try to reduce the volume sent to the speaker.

4. There may be hardware device conflicts on the computer. Check"Device Manager"Whether the device is included in the tab and there are no conflicts.

Click"Get started", pointing"Settings", and then click"Control Panel", and then double-click"system"。

In"Device Manager"tab, check that the device appears and that there is no yellow circle with an exclamation mark next to the device. If you see a yellow circle with an exclamation point next to your device, it might be using the same settings as other devices on your computer.

If you find a yellow circle with an exclamation point: Double-click the device, and then click"Resources"tab. In"A list of conflicting devices"to find resource conflicts.

If there is a resource conflict, eliminate the conflict by reconfiguring one of the devices(s) to use a different resource. For information on how to do this, please consult the device documentation or contact the manufacturer.

5. Inspection"Use single-mode DMA"Whether the settings are correct. Check"Use single-mode DMA"Set whether to turn it on or not

Click"Get started", pointing"Settings"Click"Control Panel", and then double-click"system"。

Click"attributes"and click again"Settings"tab.

Click"Advanced settings", and then click to select it"Use single-mode DMA"checkbox. If"Settings"tabs"Advanced settings"button, the sound card does not support this feature.

Consecutive clicks"OK"to return"Control Panel", and then close"Control Panel"

Reinstall the sound card driver and see if the wiring is in good condition!

You haven't set the right audio.,Enabled the environment or karaoke.,Click on the color speaker in the lower right corner of the desktop.,Just change it yourself and click OK as shown below.,If you don't have it in the lower right corner, go to the control panel to find it.。

Use the driver wizard to update the sound card driver.

The output of the device cannot fully reproduce its input, resulting in distortion of the waveform or increase or decrease in signal components.

Here's what to say about sound distortion on the computer side:

There are several causes of sound distortion, but the most common ones are the following:

1. If the sound card driver is not suitable or there is a bug, install the latest companion sound card driver to solve the problem.

2. There is a hardware conflict in the system. Use Device Manager to check if there is a device marked with an exclamation mark, review the properties, and modify the settings or reinstall if necessary.

3. The compatibility between the sound card and the system is not good. If installing the latest drivers doesn't work, you'll have to replace the sound card.

4The quality of the speaker has a great impact on the sound effect, and improving the grade of the speaker can significantly provide the quality of the sound.

Landlord, you may now exist first.

The third and fourth reasons.

Recommendation: Update the drivers.

If the sound card is new.

Please check for compatibility.

Then there's your audio problem.

Let's change the stereo first!!

One is to check the audio frequency line to see if there is any damage; Another thing is to reinstall the sound card driver and see if it solves your problem.

First of all, check whether the external audio equipment has been connected properly; Check whether the computer's sound settings are normal; I'm sure the sound card driver is installed, and I think it's going to be fine......

2. Left-click to enter the control panel. Because different settings may cause different viewing methods of the control panel, we first set the viewing method of the control panel to "large icon". 1.Left-click "Categories" in the upper right corner; 2.Left-click on the large icon.

3. Find "Advanced Clear Audio Manager" and click to enter. Perform the operations in the order shown in the table. 1.

Click on "Speaker"; 2.Click on the sound effect; 3.Click on the triangle pointed to by the arrow in Step and select "None".

4.Click OK in the lower right corner to exit the interface and complete the modification.

You can reinstall the sound card

2. Left-click to enter the control panel. Because different settings may cause different viewing methods of the control panel, we first set the viewing method of the control panel to "large icon". 1.Left-click "Categories" in the upper right corner; 2.Left-click on the large icon.

3. Find "Advanced Clear Audio Manager" and click to enter. Perform the operations in the order shown in the table. 1.

Click on "Speaker"; 2.Click on the sound effect; 3.Click on the triangle pointed to by the arrow in Step and select "None".

4.Click OK in the lower right corner to exit the interface and complete the modification.

Reinstall the system, either with an official driver or with the system. The speaker is connected to the rear jack, and the front port should not be used if it is disturbed.

If it is still distorted, then the quality of the motherboard is a problem. Buy a 2-hand PCI sound card generally 30 50,Remember to buy one that can support WindowsXP,Otherwise, you won't be depressed if you can't find the driver。

It may be that there is a problem with your sound card driver, install a new driver, or there is a problem with the speaker, see if the cable is plugged in.

The main thing is that the connector on your speaker is not plugged in properly, or it doesn't work.

I do this a lot on my computer.

See for yourself.