What is the reason for the air leakage on the battery valve of the silent Otus air compressor

When there is a problem with the vacuum pump, it can be tested by itself according to the manufacturer's opinion, and if it still cannot be solved, it may need to be repaired in the factory. As a well-known vacuum pump manufacturer, Busch Vacuum can provide a full set of after-sales service, including standardized maintenance, service maintenance contracts, exchange services, etc., and can arrange professional technicians to come to your door to solve problems when the problem is still not solved. If you feel that the above is not detailed enough, you can consult Busch Vacuum Equipment International ** (Shanghai)****.

With more than 50 years of experience in the field of vacuum pumps and vacuum systems, Vacuum Solutions International (Shanghai) and Vacuum Solutions (Shanghai) are wholly owned subsidiaries of Vacuum Solutions in China, and with more than 50 years of experience in the field of vacuum pumps and vacuum systems, Vacuum Solutions offers a wide range of products for a wide range of industrial vacuum products all over the world....

Solenoid valve leakage: 1The solenoid valve is divided into two parts, one is the electronic body, and the other is the valve body.

2.Unscrew the black plastic screw cap from the electron body and remove the electron from the valve body. 3.

Unscrew the two screws at the lower end of the metal pipe on the valve body, and remove the metal pipe (note that the metal pipe should be light when taking it) 4Clean the inside of the valve body, there is a cylinder with a groove in the valve body, align the groove with the hole in the valve body, and install it back. Recommend Tianshui Jufeng's LGY-24 7G Electric Mobile Screw Air Compressor.

Tianshui Jufeng's LGY-24 7G electric mobile screw air compressor is safe and reliable, with excellent quality, Tianshui Jufeng strives for consumers to buy with confidence, comfortable use, and perfect after-sales service. Adaptable: With the characteristics of forced gas transmission, the volumetric flow rate is almost not affected by the discharge pressure, and can maintain high efficiency in a wide range of speeds.

Electric mobile screw air compressor with a power range of 11 250 kW and an exhaust volume range of up to 40 m 3 min. Each basic type can be changed into a series of products with different exhaust volume and different exhaust pressure according to user needs.

If you want to know more about the screw air compressor, it is recommended to consult Tianshui Jufeng. Tianshui Jufeng's business philosophy is to take customers as the guide, marketing as the center, and brand management as the operation mode to achieve diversified brand management and create the brand image of Tianshui Jufeng. Tianshui Jufeng takes "first-class, first-class, and timely service" as the goal of Tianshui Jufeng.

I changed the electric bump valve and it didn't leak when it turned. 1. There is air leakage on the power outage damper.

Summary. Hello dear, what is the reason for the air leakage on the battery valve of the silent Otus air compressor.

1. The air leakage caused by the blockage of the air pressure balance hole of the solenoid valve. 2. The diaphragm of the solenoid valve is damaged, all the solenoid valves of the dust collector do not work, the pressure of the air bag is rapidly reduced to zero, the cylinder is closed, the pressure difference of the dust collector continues to increase, and the ventilation volume decreases rapidly.

What is the reason for the air leakage on the battery valve of the silent Otus air compressor

Hello dear, what is the reason for the air leakage on the battery valve of the mute celery orange cracked turf air compressor, 1. The air leakage caused by the blockage of the air pressure balance hole of the solenoid valve. 2. The diaphragm of the solenoid valve is damaged, all the solenoid valves of the dust collector do not work, the pressure of the wind is rapidly reduced to zero, the cylinder is closed, the pressure difference of the dust collector continues to increase, and the ventilation volume is rapidly reduced.

Thank you, if my answer is helpful to you, please give a thumbs up (in the lower left corner), look forward to your like, your efforts are very important to me, and your support is also the dynamic balance of my progress. If you feel that my answer is still satisfactory, you can click on my avatar for one-on-one consultation. Finally, I wish you good health and a happy mood!

The reasons for the leakage of the solenoid valve can be roughly summarized into the following 5 points:1The solenoid body arrows are pointing in a way that is inconsistent with the direction of fluid flow.

The solenoid valve can be removed and reinstalled, so that the direction of the two is consistent; 2.The debris blockage makes the valve not close tightly. The solenoid valve and the filter screen should be cleaned, and under special circumstances, the aperture of the filter screen can be enlarged to the left and right, the pressure can be balanced, the piston can move down normally, and the valve seat can be compressed; 3.

The moving iron, spring and main valve core are stuck, the spring length and pressure are not suitable, and the seal book is damaged or the position is uneven; 4.The selection is wrong, for example, the actual working condition of the solenoid valve is that there is no working pressure, and the user chooses the pilot solenoid valve, which causes the solenoid valve to be unable to close normally. 5.

If the valve seat and stem are worn or brushed, resulting in the solenoid valve not being closed tightly, the brushed valve stem should be grinded, the worn valve seat should be repaired or replaced;

Summary. <>

Hello! Dear, I'm glad for your question, what to do if the air compressor closing valve leaks to help you find out: first of all, check whether the check valve is faulty, and replace the new check valve in time.

What should I do if the air compressor closure valve is leaking?

Hello! Dear, I'm glad to hear your question, what to do if the air compressor valve is leaking: first of all, we must check whether the single early slow check valve is out of the stove and is faulty, and replace the new check valve in time.

Kiss. First of all, it is necessary to check whether the check valve is faulty, and replace the new check valve in time.

2. The gasket of the one-way check valve is full of oil mist, so it is necessary to consider replacing the gasket with a stopper, or getting a rubber pad of the same size, placing it under the gasket, and fastening it, so as to prevent air leakage.