My memory card won t get out of the camera 30

You can't dismantle it yourself, because you can't fight it, and you're saying that some places are welded to death, and you have to call someone to fix the camera.

Are there tweezers or paper clips? Did you put the short rod in? If Sony can be bounced out by pressing it, just take a paper clip or tweezers and go down.

If it is directly inserted and pulled, then the tweezers are clamped out, and it is OK. Or you can find a long stick card sleeve and put it in and try it out.

Boycott Japanese goods, Japanese goods are very bad, and they will be finished as soon as they are dismantled, and they can't be installed.

Take a small stick, dip it in 502, then go to the memory card, stick it, pull it up violently, not once, just try a few more times. Don't use tweezers or anything, it will hurt the camera.

Summary. Generally, there will be a folder on the memory card of the camera: DCIM, on your card, this folder is set to be hidden, so you can't see it, but the system can use it normally.

The solution is very simple: 1. Double-click "My Computer", select "Tools" on the menu, and then select "Folder Options". 2. Click the "View" tab on the tab bar.

3. Find "Show all files and folders" at the bottom and select it. 4. Remove the small tick in front of "Hide protected operating system files". 5. Click the "OK" button to exit.

The camera memory card is plugged into the computer and the files are not visible.

Hello, it is a pleasure to serve you!

Generally, there will be a folder on the memory card of the camera: DCIM, on your card, this folder is set to be hidden, so you can't see it, but the system can use it normally. The solution is simple:

1. Double-click "My Computer", select "Tools" on the menu, and then select "Folder Options". 2. Click the "View" tab on the tab bar. 3. Find "Show all files and folders" at the bottom and select it.

4. Remove the small tick in front of "Hide protected operating system files". 5. Click the "OK" button to exit.

I don't see a file.

Here's another one and it will show.

Ask about custom messages].

I'm really sorry, I fell asleep last night and <>

If this is the case, there is a possibility that there is a problem with your memory card <> corrupted

The camera memory card cannot be displayed in the camera, but can be viewed on the computer.

If the camera's memory card can be read on the computer, but it does not display properly in the camera, there may be several reasons:1Memory card corruption:

The memory card may have been corrupted or some files have been corrupted, which will cause the camera to not display ** or ** in the memory card properly. You can try to use a disk detection tool or data recovery software on your computer to detect and repair it. 2.

Memory card compatibility issues: Some cameras only support certain types or brands of storage cards, if you use an incompatible memory card, the camera may not be able to recognize and display **or**, it is recommended to use the memory card recommended in the camera manual or refer to the advice on the official website of the camera brand. 3.

Camera hardware failure: The card reader inside the camera may be faulty or the cable is loose, resulting in the inability to read the data in the memory card, in this case, you need to send the camera back to after-sales service or contact the maintenance personnel for inspection and repair. To sum up, if the memory card is damaged or has compatibility issues, you need to reformat or replace the memory card; If the camera hardware fails, it is recommended to send it back to the after-sales service or contact the dedicated filial piety personnel to deal with it.

The camera memory card cannot be displayed in the camera, but can be viewed on the computer.

Hello, I'm glad to help you, but this could happen because of an error in the file system of the camera's memory card, or a malfunction in the camera's card reader. Here are some things you can try:1

Reseat the memory card: Turn off the camera, then remove the memory card, wait a few moments before reinserting the memory card, start the camera and see if it looks good**. 2.

Format the memory card: If the memory card is still not displayed properly after reinserting the memory card, you can try to format the memory card. However, formatting will delete all the data on the memory card, so it is recommended that you back up the important data on the memory card to your computer before formatting.

3.Replace the memory card reader: If the memory card is displayed normally on the computer, but cannot be displayed in the camera, the camera's card reader may be faulty.

You can try replacing the memory card reader, or inserting the memory card into a different camera or card reader, and scroll to see if it looks good**. If none of the above methods solve the problem, it is recommended that you contact the camera manufacturer or a professional camera repair center for help.