What is the color of aluminum veneer, and what are the classifications of aluminum veneer?

The color of the surface of the aluminum veneer is made by spraying paint, which is generally sprayed with fluorocarbon paint.

There are three commonly used forms of exterior surface coating for aluminum veneer curtain walls, namely powder, polyester, and fluorocarbon. Each of these three coatings has its own uses, such as powder or polyester for indoor ceilings, while fluorocarbon paint is commonly used for aluminum veneer for outdoor curtain walls.

No matter how harsh the climate is, such as high temperature exposure, high air humidity, acid rain, heavy storms and rains, fluorocarbon paint is always as new. The outdoor climate is unpredictable, and in order to last for more than a decade, it is wise to use fluorocarbon paint. If you are greedy for cheap choice of polyester paint, ** is cheaper, but the service life is not as long as fluorocarbon paint, comprehensive consideration may not be as cost-effective as fluorocarbon paint, after all, fluorocarbon aluminum veneer ** is only more than 20 yuan per square meter more expensive than polyester aluminum veneer.

Therefore, aluminum veneer must be selected according to the anti-corrosion needs when making paint, Yasheng paint recommends the use of fluorocarbon paint, which is also the most used one at present, and the performance is also good.

Electrostatic spraying production line pre-treatment sink.

Fluorocarbon coatings mainly refer to polyvinylidene fluoride resin (kanar500), which are divided into three types: primer, topcoat and varnish. The spraying process is generally divided into two, three or four coats. Fluorocarbon coating has excellent corrosion resistance and weather resistance, can resist acid rain, salt spray and various air pollutants, has excellent cold and heat resistance, can resist strong ultraviolet radiation, can maintain long-term non-fading, non-chalking, and long service life.

There are many types of aluminum veneer, and the name of aluminum veneer is also different according to the different properties of aluminum veneer, and the classification of aluminum veneer for building materials is as follows:

Aluminum veneer classification:

1. Fluorocarbon aluminum veneer.

2. Wood grain aluminum veneer.

3. Stone grain aluminum veneer.

4. Perforated aluminum veneer.

5. Carved carved hollow aluminum veneer.

6. Window grille aluminum veneer.

7. Cylindrical column-clad aluminum veneer.

8. Single song hyperbolic aluminum veneer.

9. Stretched aluminum veneer.

10. Arc-shaped shaped special-shaped aluminum veneer.

11. Curtain wall aluminum veneer aluminum veneer curtain wall.

12. Aluminum veneer ceiling Aluminum plate ceiling.

Aluminum veneer is classified by style:

1.Conventional aluminum veneer: square aluminum veneer or rectangular aluminum veneer (can be sprayed with different colors);

2.Imitation wood grain aluminum veneer: with wood grain style;

3.imitation stone aluminum veneer;

4.Perforated aluminum veneer;

5.hollowed-out aluminum veneer;

6.single-curved aluminum veneer;

7.hyperbolic aluminum veneer;

8.Other special-shaped aluminum veneer.

Aluminum veneer is classified according to the surface decoration effect:

1.coated decorative aluminum veneer;

2.oxide-colored aluminum veneer;

3.film decorative aluminum veneer;

4.Color printed aluminum veneer;

5.Stretched aluminum veneer;

6.Mirrored aluminum veneer.

Aluminum veneer is classified according to the scope of application:

1.exterior curtain wall aluminum veneer;

2.interior aluminum veneer;

3.column-clad aluminum veneer;

4.Aluminum veneer with beam-clad beam;

5.Aluminum veneer ceilings, also known as aluminum veneer ceilings;

Aluminum veneer is classified by performance:

1.fireproof aluminum veneer;

2.antibacterial and mildew-proof aluminum veneer;

3.Antistatic aluminum veneer.

It turns out that there are so many classifications of aluminum veneer, and knowledge has increased.

The commonly used fluorocarbon, polyester, and acrylic coatings mainly include metallic colors, plain colors, pearlescent colors, fluorescent colors and other colors; The aluminum alloy panel with anodizing and timely treatment has unique colors such as rose red and bronze, which has a special decorative effect.

1. Decorative composite board with film: according to the set process conditions, the color film relies on the action of the adhesive to make the color film adhesive on the aluminum plate coated with primer or directly on the aluminum plate after degreasing treatment. The main varieties are gang grain, wood grain board, etc.

2. Color printing aluminum-plastic panel: different patterns are printed on the transfer paper with color ink through advanced computer phototypesetting technology, and then various imitation natural patterns are indirectly copied on the aluminum-plastic panel through thermal transfer technology. It can meet the creativity of the designer and the personalized choice of the owner.

3. Brushed aluminum-plastic panel: The aluminum alloy panel with brushed surface is used, and the common ones are gold brushed and silver brushed products, which bring different visual enjoyment to people.

4. Mirror aluminum-plastic panel: The surface of the aluminum alloy panel is polished, just like a mirror.

The colors of aluminum-plastic panels mainly include metallic, plain, pearlescent, fluorescent and other colors, which have decorative effects and are the most common products on the market. These colors Atari aluminum-composite panels are contained.

Can the color of the aluminum plate be the same as the aluminum alloy profile, the aluminum plate is made of aluminum, and the aluminum alloy plate is made of aluminum alloy. So let's introduce aluminum and aluminum alloy separately, and we can know their differences. 1. Introduction to aluminumAluminum is a light metal among non-ferrous metals, with a density of silvery-white.

The electrical and thermal conductivity of aluminum is very good, the chemical properties are also very active, exposed to the air, the surface is easy to form a layer of alumina film, protecting the metal below is no longer corroded, so aluminum has strong corrosion resistance in the atmosphere, but because the film is extremely thin, its corrosion resistance has a certain limit. Pure aluminum has good plastic cover and can be made into tubes, rods, plates, etc. Aluminum, on the other hand, has a lower degree of strength and stiffness.

The polished surface of aluminum has a reflectivity of more than 80% to white light, and also has a strong ability to reflect ultraviolet and infrared rays. Aluminum can also be surface colored, so as to obtain a good decorative effect. 2. Introduction of Aluminum Alloy Aluminum alloy is composed of magnesium, manganese, copper, zinc, silicon and other elements added to aluminum to improve the practical value of aluminum.

There are many types of aluminum alloys, and the aluminum alloys used for architectural decoration are the wrought aluminum alloys in the deformed aluminum alloys. Forged aluminum alloy is an aluminum-magnesium-silicon alloy, in which LD31 has medium strength, high impact toughness, excellent thermoplasticity, and can be extruded into various profiles with complex structure, thin wall and hollow at high speed or forged into forgings with complex structure. LD31 has excellent welding performance and corrosion resistance, and the surface is very smooth after processing, and it is easy to color, and it is the most widely used alloy in AI-MG-ST series alloys.

Summary. Hello dear <>

The national standard color number of aluminum veneer is: signal white, which is often used for indoor and exterior wall decoration. : Pure white, which is also one of the colors commonly used for interior and exterior wall decoration. ：

Silver-gray, often used in the decoration of the exterior walls of commercial buildings. : Grayish-silver, similar to silver-gray, but darker. : Traffic white, often used for spraying aluminum veneer and screen, etc.

Aluminum veneer national standard color number.

Did you find it? Hello dear <>

The national standard color number of aluminum veneer is: signal white, which is commonly used for indoor and exterior wall decoration. : Pure white, which is also one of the commonly used colors for interior and exterior wall decorations. ：

Silver-gray peipai is often used to decorate the exterior walls of commercial buildings. : Grayish-silver, similar to silver-gray, but darker. : Traffic white, often used for spraying aluminum veneer and screen, etc.

Silvery-white too.

Is it still there. Dear, the national standard color number of aluminum veneer silver white is RAL9016.

Aluminum veneer is a flat decorative sheet made of aluminum, which is used for the decoration and protection of building facades. It has the following features: 1Lightweight:

Aluminum veneer is relatively lightweight, making it easy to carry, install, and operate. 2.High Strength:

Although it is a lightweight material, aluminum veneer has high strength and rigidity, which can withstand and empty certain external forces and pressures. 3.Weather Resistance:

Aluminum veneer has excellent weather resistance, can resist the erosion of environmental factors such as ultraviolet rays, corrosion, moisture, etc., and maintains its appearance for a long time. 4.Plasticity:

Aluminum veneer is easy to process and shape, and can be bent, cut, punched and other processing processes according to the design requirements to achieve diversified shapes. 5.Good fire performance:

Aluminum veneer has good fire performance and meets the requirements of fire protection standards for building materials. 6.Decorative effects:

The surface of the aluminum veneer is sprayed, oxidized, coated and other treatments, which can achieve decoration of various colors, textures and effects. 7.Environmental friendliness:

Aluminum veneer can be reused, in line with the concept of sustainable development.

Where did you find it out and can you recommend it.

Kiss, where is your aluminum veneer used?

Toll booth canopy.

Toll booth canopy.

Dear, my family used to be a <> in building materials

In the past, I was in charge of warehouse incoming and outgoing shipments, so I would be familiar with these <>

Can you tell me where you found it, and I'm going to report to the leader.

Are you there. Bao, this is provided by **business, you report to your leader and say that **business will provide it.

I also know what color is on the national standard.

You can't just say what color the manufacturer says.

Did you receive the message?

Are you there. Dear, the color number of the manufacturer's production is stipulated according to the national production regulations, not set by the manufacturer.

Aluminum plate is a commonly used gold sail finger building material, which is often used in construction, automotive, aerospace and other fields. What color is the primary color of the aluminum plate? This is a question that many people are confused about. Let's take a closer look.

What is Aluminum Sheet?

Aluminum plate is a metal material with aluminum as the main component. It has the advantages of light weight, corrosion resistance, good conductivity and strong machinability. Aluminum sheet is widely used in construction, automotive, aerospace and other fields.

According to different processing technologies and requirements, the specifications and varieties of aluminum plates are also very different.

What color is the primary color of the aluminum plate?

The primary color of aluminum plate refers to the aluminum plate that has not undergone any surface treatment after being treated by rolling or stretching and other processes. Because the aluminum plate itself is silvery-white, the primary color of the aluminum plate is also silvery-white.

Why do you need surface treatment for aluminum sheets?

Although the aluminum plate itself has good oxidation resistance and corrosion resistance, in practical applications, due to specific working environment, climatic conditions and operation methods, aluminum plate will be subject to certain corrosion and damage. In order to prolong its service life and aesthetics, surface treatment of aluminum sheets is usually required.

What are the methods of surface treatment of aluminum plates?

There are many ways to treat the surface of aluminum plates, and the common ones are as follows:

1. Anodizing treatment: a dense oxide film is formed on the surface of the aluminum plate by electrolysis, which can enhance the corrosion resistance and wear resistance of the aluminum plate.

2. Spraying treatment: spraying a layer of anti-corrosion primer and topcoat on the surface of the aluminum plate can enhance the corrosion resistance and aesthetics of the aluminum plate.

3. Coating treatment: A layer of metal or alloy film is plated on the surface of the aluminum plate, which can enhance the wear resistance and acid and alkali resistance of the aluminum plate.

Conclusion Aluminum plate is a widely used metal material, and the primary color of aluminum plate is silvery-white. In order to enhance its corrosion resistance and aesthetics, surface treatment of aluminum sheets is usually required, and common treatment methods are anodizing, spraying and coating.