Meizu MX2 consumes a lot of power, and it takes 3 minutes to chat1, and it is useless to ask for hel

Hello, the machine may heat up for a long time or run too many applications, which is also related to personal usage habits. The Meizu MX2 uses a metal bezel, which makes it feel more noticeable when the heat is dissipated.

According to the law of conservation of energy and the current level of science and technology, the energy in the battery will inevitably be converted into heat energy when it is supplied to the operation of the CPU and other devices, and the amount of heat is directly proportional to the power consumption of the CPU and other devices. Theoretically, contemporaries have a direct ratio to the performance of the device, which is an immutable law of physics. Due to the precise structural design of the mobile phone, the hardware of Meizu mobile phones comes from the top chips of the world's top manufacturers, and the configurations are all the top configurations in the industry.

High performance must bring high power consumption and a certain amount of heat generation.

It is recommended to adjust the CPU performance mode, try to close the software that is not running in the background, do not run too much software at the same time, and maintain good software management habits to improve. When the fever is severe, try flashing or updating the firmware of your phone. If there is a problem with the machine and it heats up frequently, it is recommended that you can return the machine directly to the factory.

Soon? I use Meizu 2 and 4s,3 minutes of chat with 1% is not much,Android has a lot of background programs,Internet power is also fast,Internet according to you can be counted for 5 hours in a row.。。 Not a lot.

Huang Zhang, a mobile phone producer, didn't graduate from high school, where did he come from high technology Where did he come from with Chinese Jobs? The CPU purchased is Samsung's, not Goldman Sachs', and Samsung's own Cup is Goldman Sachs' Think about it.

Even if you play a large game, MX2 will not shut down in half an hour, there are only two situations: one is virtual power, it is recommended to use the equipped charger to charge for about 4 hours (do not use a mobile power bank, it will often be not flushed, resulting in a weak battery, only used when you go out).

The second is the battery problem, MX2 battery quality problems are many, if the normal charge is fully charged (do not play during the period), or this situation, find after-sales or specialty stores to test it.

The common problem of smartphones is that they still tend to have large screens and multiple cores, and the power consumption is certain, and it may be a problem with the machine to shut down in half an hour, flash the latest firmware, or take it back to the store for testing.

Go to customer service Half an hour is not normal.

Ways to improve the battery life of your phone:

1. Turn on the power-saving mode, reduce the brightness of the screen, and set the screen standby to less than 1 minute, and the smartphone can turn on the light sensor to automatically adjust the screen brightness;

2. Reduce the operation of large-scale 3D games and programs that require constant contact with the Internet;

3. Develop a good habit of clearing background running programs, and turn off the work of cellular, WLAN, Bluetooth, GPS, gravity sensor and other chips;

4. Keep away from low temperature environment. Low-temperature charging will increase the charging time; Low temperature use will affect the activity of lithium polymer batteries, resulting in reduced battery life or inaccurate power display;

5. If you are not using your mobile phone, you can turn off mobile data, turn off 4G network, and use 2G or 3G priority mode.

It is recommended to flash the computer again, do not install any software, and try to standby again. If it returns to normal after reflashing, it means that it is a problem with the software.

If it still consumes a lot of power after reflashing, you can try to change the mobile phone card and test it again.

After the above two methods, it still consumes power, then it should be a problem with the hardware of the mobile phone, and return to the factory immediately.

ps: The reasons for everyone's fast power consumption are different, and individuals still prefer more software problems.

Android machines are known to consume a lot of power. But your situation is a bit of a problem if you consume 30% in one night.

Try to switch to airplane mode at night or install power-saving software such as Kingsoft Battery Doctor, and be sure to clean up the background programs to see if the situation improves.

It's not a big deal that the machine you just bought starts to lose a lot of power, but if the situation persists, it may be that there is a problem with the architecture of the machine, or the poor stability of the ROM has a lot to do with the presence of bugs. Or flash a new ROM. It is recommended that you go to your local Meizu store and ask for a replacement machine.

In addition, it is not a good idea to buy a new machine as soon as it is released. After all, Meizu is not a world-class company like Apple, and it is understandable that the machine is abnormal. Support domestic production!

The MX2 setup has CPU performance tuning in it, changing it to power-saving mode, and this setting seems to be just a power option. Theoretically, the performance is improved, but the use effect is not obvious.

I had that experience too, but it's solved now. Before, I consumed about 3 electricity overnight, and then I consumed about 30 electricity in one night for two or three days, and I installed an LBE safety ambassador two or three days ago, and I charged while playing at night and then stopped playing and sleeping when it was fully charged. Later, I uninstalled the LBE.,And then wait for a full charge to play.,Now it's okay.,It's back to the previous state.,The background is all turned off overnight and consumes 3 left rear.。

I don't know if it's a problem with LBE or a problem with playing while charging. Hope it helps.

Usually turn off the software that you don't use, and running in the background will increase power consumption!

Flash Dream 2 has an official built-in root,Delete the software that often opens automatically in the background,You can save a lot of power。

First of all. What software is installed? Generally, the software will start itself in the background. After rooting, it is forbidden to use the self-starting housekeeper. And don't open the net. I think the 3G network is particularly power-hungry.

Causes and solutions:

The battery is damaged. With the use of the phone, the capacity of the phone's battery will slowly decrease. Until we felt like the power was running out all of a sudden. At this point, the best thing we can do is to replace the phone's battery.

There are too many background programs on your phone.

Every program you open will consume your phone's battery, and too many background programs on your phone will cause your phone to consume a lot of power. Disabling unnecessary background programs can effectively reduce battery consumption.

The screen brightness is too high.

Generally, the higher the brightness setting of the mobile phone, the greater the power consumption.

Bluetooth, GPS, WiFi and data connection are enabled.

The phone is used too often.

The more often you use your phone, the faster it drains your battery. Especially nowadays, with smartphones, we are paying attention to and using mobile phones almost all the time.

You may have opened some programs in the background, you try to see how many programs are running in the background, because it will return to normal, indicating that the machine is no problem, I have used it myself for a long time, and it feels very stable, that is, the power consumption point of playing games, I hope it can help you!

Hello, MX2 pure standby power consumption is very small, 50% overnight is not normal. Exclusion Reason:

1. The mobile phone has background running, especially when the network is turned on, and there are applications running on the Internet. Consumes a lot of power. Quit the app while on standby, and double-click the home button to clear the background. Turning off the network is more power-efficient.

2. If you take out the phone card directly. If the standby power consumption is significantly reduced. It is a problem with the card, changing the card, cutting the card is recommended to replace the original small card.

3. It is not easy to close the operation of some third-party applications and the operation of the acquired or service. Some software services consume a lot of power. Exclusion means reflashing the firmware and clearing the data.

If the power consumption is significantly reduced without installing a third-party app, it is a problem with the third-party app, choose a safe and power-saving app.

4. If the above cannot be solved, it cannot be ruled out that it is a problem with the hardware of the mobile phone, and it is recommended that you bring your mobile phone and warranty card to the local Meizu certification store to consult the after-sales return to the factory for testing.

Because you didn't clean the background programs, the software runs in the background and consumes power.

You can clear the data or reflash the latest firmware, mine is also MX2 flight standby 3% 4% per night

Hello, it is recommended that the phone be completely turned off, then turned off and charged for 3 to 4 hours, and then turned on to test it.

You can also reflash the firmware: MX2 Flyme firmware, Meizu firmware update tutorial;

If the problem is still there, it is recommended to contact the local Meizu certification store and return the machine to the factory to test whether there is a battery problem.

Mine is also an MX2 and it may be a phone issue.

Briefly share my experience of saving electricity:

1. Always on the Internet, browsing the web or Weibo and the like, the mobile phone CPU and GPU will work at a relatively high frequency, especially 3G Internet access, which consumes relatively more power.

2. There are too many apps running in the background, clear unnecessary ones: in the non-lock screen interface of the phone, swipe from both sides of the home button to the middle of the screen (upward action), it will slide out "Recently opened", press and hold the icon to slide to the middle of the screen (upward), you can clear a single background. Pressing and holding the icon down will clear all background.

Long press the icon to lock the background, and when all are cleared, it will not be cleared.

3. Background auto-start and push service run more: in the phone settings >> App Control, turn off unnecessary apps for "boot auto-start" and "push notifications". It can optimize the operation and storage, save power naturally and generate less heat. If you have data online, these two functions can save a lot of traffic.

4. Turn on the power-saving mode in the phone settings > Accessibility Function, which can significantly save power and reduce heating.

5. The FLYME system of Meizu MX3 itself has been well optimized, and there is no need to install optimization software.

Third-party optimization software is installed according to your own needs, and some of them may have a certain impact on the performance of the phone itself due to compatibility.

6. Turn off the switch of the network in time when you are not using the mobile phone, especially when you go to the Internet, especially when you go online, the switch is turned on, and it consumes more power when you do not use the Internet. Or in the traffic limit, restrict some software data to access the Internet.

7. Switch the appropriate network mode, 3G is stable, only 3G is used.

8. If the power consumption is severe, it may also be a problem with the mobile phone card, and it is generally best to use the original small card.

9, let's not talk about using the right screen brightness and the right volume, it's too pediatric.

Domestic mobile phones, the weakness of domestic batteries. The best-selling power bank proves this.

Open Settings, find Accessibility, find Apps, and tap Running. Turn off the software that is running in the background. Some need to be closed a few more times. The power-saving effect is solved immediately.

Turn off all running in the background! Turn off the network!

How long have you been buying it? When I was working at Rocky English, many people in the company bought Meizu, it's okay, there's no problem, don't talk nonsense downstairs, Meizu 3 is not removable, if you just bought it, it is recommended to repair it, the longer it drags on, the more trouble it is, you know.