-
You look for it again, see if there is a Hard Disk option in the BIOS, and some BIOS has a Hard Disk option, in which you can choose the hard disk that boots first.
If not, there is no way, only to remove the hard disk and plug it into someone else's computer, or use a mobile optical drive.
In addition, there are two options for plugging the hard disk into someone else's computer, one is to use a mobile hard disk enclosure, and the other is to find a notebook with the same hard disk interface and an optical drive.
-
There are too many reasons why you can't enter the system, you take a good look at the prompts.
1。Let's start by determining whether it's a hardware or software issue. Generally speaking, if there is a problem with the memory or the hard disk has bad sectors, it is easy to have the problem that it can be turned on but cannot be started or it is easy to crash.
2。Soft problems are caused by troubleshooting hardware issues. This problem is easy to solve.
Suggestion: Use the installation CD to do a clean installation, and install it with the ghost version because of driver problems, and it is easy to install unsuccessfully.
-
Put the system disk in the optical drive or plug in the U disk (the U disk that can boot), restart the computer, press the F8 or F12 key, select the optical drive or U disk to boot, and then there is no need to say anything.
-
You can try to go to the BIOS and change the hard drive from IDE to AHCI or vice versa.
-
Format the C drive and reinstall it.
-
Maybe there is a problem with the hard drive, look for after-sales service!
-
Kuang-Chi -- Delete all partitions with diskgen software.
-
It is not possible to reinstall the system if it does not turn on.
1. The premise of installing the system is to be able to open the basic interface of the computer, that is, it is generally the icon interface, and can enter its DOS or other basic systems.
2. Then enter the PE system of the U disk for installation.
3. If you can't turn on the machine, there is generally damage to the power supply and damage to the motherboard. It is recommended to send it directly for repair.
-
The entire Windows installation file needs to be in the USB flash drive.
The U disk must be booted and processed, and the U disk must be used to bring up the computer and run the U disk under DOS!!
-
You can install it with a USB flash drive.,But you have to put something in the system first.,I've installed it once.,Forget all.,I'm asking.。
-
How to install the system?
-
Yes, you need to boot into the BIOS to set up the USB flash drive boot.
-
It depends on the situation, if you can enter the BIOS, you can still use a USB flash drive, if you can't even enter the BIOS, it is estimated that it will be difficult.
-
To be honest, it's very convenient to buy a plate online, why do you pay for that?
I have win7 activation software.
Your book is pre-installed with vista.·· When installing Windows XP on the laptop, you can't find the hard drive and enter the system blue screen problem or you can't enter the system with ghost.,It's not only a common problem in the book now.,It's also a problem with all 945 chips and SATA hard disks.。 The key is that when the motherboard of the 945 chip uses SATA hard disk, if the SATA mode in the BIOS is enabled, the SATA driver must be loaded separately when installing XP (now some XP installation CDs integrate SATA driver), otherwise the hard disk cannot be found. So the system of Piggy Cat does not prompt you whether you want to install the integrated driver, but directly installs the driver in, which is better than him in the special edition of the computer company. >>>More
Hit 10,000. Any problem can be solved.
It has nothing to do with the format.
I still don't understand it. >>>More
Format Re-Copy and re-open to see.
1. The shared computer host must be in the same LAN and have a fixed IP address. 2. Select "Start" "Settings" and "Printer & Fax" on the host computer to enter the printer interface. Right-click and click "Share" to confirm. >>>More