ASUS laptops can t use GHOST what s going on

Your book is pre-installed with vista.·· When installing Windows XP on the laptop, you can't find the hard drive and enter the system blue screen problem or you can't enter the system with ghost.,It's not only a common problem in the book now.,It's also a problem with all 945 chips and SATA hard disks.。 The key is that when the motherboard of the 945 chip uses SATA hard disk, if the SATA mode in the BIOS is enabled, the SATA driver must be loaded separately when installing XP (now some XP installation CDs integrate SATA driver), otherwise the hard disk cannot be found. So the system of Piggy Cat does not prompt you whether you want to install the integrated driver, but directly installs the driver in, which is better than him in the special edition of the computer company.

So just set it up in the BIOS, press F2 to enter the BIOS after booting, follow the steps below---AdvancedIDE Configuration--SATA Operation Mode--- change Enhangced (High Performance) to Compatible (Compatible Mode), and then press F10 to save it·· It is recommended that you go to the ** ASUS OEM.

Burn after installation, as long as it is an ASUS machine.

As soon as you put it on, it's genuine. To add,Piggy Cat's system doesn't seem to support SATA driver,So if you really want to use Ghost,Go load a tomato garden,But I think it's better to install an OEM.,The driver goes to ASUS's online ** on the line.,No matter how you want to install it.,First of all, you have to go into the BIOS and set it up there first.。

Oh, the landlord should give it like this!! ASUS notebooks come with a recovery function, and it's OK to press f9 when you boot up.

The reasons may be as follows:

1.It could be "Ghost Windows."

win7 pure self-selected flagship official collector's edition", engraved into an installation CD,Perform ghost installation。

2。By changing the relevant SATA settings in the ASUS Laptop BIOS, you can solve the problem of Ghost installing Windows

The way to issue the XP is to go into the BIOS, in the "Advanced IDE Configuration SATA Operation."

mode" and select "compatible".

3。with Windows

7. Activation tool performs activation.

4.The activation cracking mechanism is not compatible with the hardware of the notebook, and you can delete the hidden partition located in the first partition by hand. Re-execute "Zhongguancun ghost."

win7 pure optional flagship official collector's edition".

Oh, boot press F2 to enter the BIOS, select the Boot menu, and then select the IDE mode, there are two items, one is AHCI, the other is C....I can't remember clearly.,Anyway, it's starting with c),Just choose one that starts with c.,And then press f10 to save and exit to install with ghost.。 The reason why it can't be installed is because there is no AHCI driver, so the hard disk cannot be recognized.

The ghost system is stable, the compatibility is not good, and it is recommended to use the installed version

1.There is no solution to this problem for ASUS.

2.The result of communicating with ASUS Ziyan is that the special function of some motherboards cannot be recognized normally.

3.The more high-end the one, the less ghost it is

4.The computer company version of ghost solves some of the problems, and most boards can ghost normally

5.This problem is more serious in notebooks.

I thought so at first, I thought it might be a problem with sata, so I did the Sun State IDE mapping, no result, and then adjusted the boot items, no result, set the disk as the role of the source partition, no result, the motherboard closed all the indifferent options, no result......

So I gave up later.,Use a more negative method.,Install a set of A card public driver system to make a ghost.,Then install a set of N card system to make a ghost.,And then you need what model you need on what model of ghost can solve part of it.,But it's not complete.,Sometimes there are still problems.。

The feature is that after ghosting, sometimes tell you that you can't find the system ......

Who said you can't ghost!

Ghost is the operation of the hard disk, and it has nothing to do with the motherboard!

What do you want to ghsot? Is it hard disk copying?

Or a backup partition?

If it is a hard disk copy, you can choose to load ghost

If it is a backup partition, you can argue that you can enter the DOS first, and then start GHSOT, note, the ordinary DOS only supports the FAT32 format of the hard disk partition, NTFS does not display, if you want to display the NTFS partition, you need to load the NTFS driver, that is, the execution file is OK.

I haven't tried the ntfs partition for ghsot operation, fat32 can be operated.

My motherboard is ASUS and the problem you said didn't happen.

If what I said isn't what you want to ask, please elaborate on what you want to do!

I can put it on! The computer motherboard I assembled for my classmates was ASUS! There are several versions of ghost! There's definitely one you can use!

And out of ghsot

You try to do it in the empty sedan car!

Some motherboards are not compatible with the chost

Switch! Generally use computer companies or piggy cats! There are also tomato gardens, rainforest woods.

Try it all!

If the logo screen doesn't move, it should be stuck in a dead loop, and the CPU has been running, so the fan sound is very loud. The second sentence didn't understand.,Generally speaking, the system or hard disk has little to do with the BIOS.,If you want F1 to enter,It should be the BIOS problem.,Of course, I didn't see what the prompt was.,Can't give you a judgment.。

The procedural reasons for this issue are more numerous, although I can't say the exact reason. But it should have something to do with your backup recovery!

I can only say the following suggestions: FAT32 format to NTFS format! Then back up your current win7 again.

The ghost image suggestion is partial, and the two-part is in the recovery process, so it's hard to say what unknown factors will occur.

It can only be said that the probability of problems is relatively higher!

It's good to change the system, it's normal for a piracy system to repeatedly pretend to have problems, and re-divide the sub-area if there is no important information. Don't use antivirus software to optimize or patch anymore, a pirated system will not be tossed.

The second diagram is which system is entered?

Laptops can't just use ghost to install the system. Because the notebook has several hidden partitions. Random ghost can easily lead to failure to boot. That's where you are now.

Immediately take your machine to the after-sales service, and say that it can't be opened, and it is good to help you reinstall the system after the after-sales service.

ghost = reload.

Your current situation is that you have reinstalled, and you have deleted the win7 you used before. Loaded with XP. However, it can't be started properly because of the boot. And now you're saying you don't want to reload. Does it make sense?

It should be that the MBR has been destroyed.,You use a little bit of the installed disk to make the system.,That's it.,Don't use this ghost version.。

Repartition all the hard disks, and it's OK to install them once. Nothing is a problem!

This is not booted after installation:

1. The system is incomplete. Workaround: Reinstall the system.

2. Because the first boot disk you set is a U disk, or a CD, you forgot to set the hard disk as the first boot item after installation. Solution: Enter the BIOS and set the hard disk as the first boot item.

3. The hard disk has bad sectors. Solution: Format the C disk before installing the system and then install the system.

Go into the BIOS to check if the boot order settings are out of order.