Is it okay to use dark beams for all self built houses in rural areas?

Today's rural self-built houses are like a hundred flowers blooming, competing with each other, and many of them are designed with ingenuity. Of course, although the money bag is more bulging than before, every penny is still hard-earned money earned by both hands, so spending money must be spent on the blade. In the process of building a house, we will consider how to spend less money, and the most feared thing is that we will not get quality assurance after spending money, especially the foundation problem can not be sloppy.

What is Ground Beam? The main role of the ground beam The rural self-built house must be set up with the ground beam, and the ground beam can not cut corners, nor can this step be omitted, why do you say so? The ground beam is called the ground ring beam in the professional term of building a house, which is set below plus or minus zero, which has the effect of laying the foundation, and at the same time adjusts and improves the irregular settlement of the foundation to avoid cracking of the wall.

There is also a situation called ring beam, which is set on the floor slab, and half of the ring beam is built on the structural column, which can stabilize the structure, strengthen the seismic effect of the main building, increase the integrity of the building, and play a role in reinforcing the building. Can I leave the floor beam without it? In the area below 6 degrees of seismic fortification, when the foundation is better, such as dry medium coarse sand, yellow clay can not be done, of course, if the economic budget is sufficient, then do the ground circle beam is equal to the icing on the cake.

On the contrary, if the foundation conditions are poor, the soil is clay and silt with high moisture content, or the foundation soil is unevenly distributed, then it is recommended to make a geosphere beam. When the seismic fortification is above 6 degrees, then not only the ground ring beam should be arranged, but also there should be structural columns, connecting bars between walls and columns, and between walls and floors. Do these well, once there is a **, they can effectively increase the escape time.

Precautions: Of course, the setting of the ground ring beam does not mean that everything is fine, the ring beam under the rural cast-in-place slab is set up, and it should be a reinforced concrete column of vertical structure under the ring beam, and the position is at the corner of each wall. It can be said that these are the supporting structures of the foundation of rural self-built houses, which play a vital role in the safety and quality of the house.

The above is about the place where the ground beam is set up to pay attention to, everyone is building a house, the house is contracted to the construction team, the construction team must be in strict accordance with the marked construction, do not wait until the end of the house quality problems, regret it.

Yes, rural feng shui.

Summary. Hello, dear. The second floor of the rural self-built house is better to be made of anti-beam, which is more solid and solid.

This is because the structural composition of the ring beam is composed of two support points and a beam body, after adding layer two, the support point will change, the beam body will also change, and the beam body will be deformed, so, in order to ensure the stability of the structure, the beam body must be reversed, so that the position of the support point changes, so that the beam body deformation will not be too large, so as to ensure the stability of the structure. Dear, I hope mine can help you <>

The second floor of the rural self-built house should be a reverse beam or a dark beam.

Hello, dear and auspicious. The second floor of the rural self-built house is better to be made of anti-beam, which is more solid and solid. This is because the structural composition of the ring beam is made up of two support points and a beam body, after adding layer two, the early support point of the support bench will change, the beam body will also change, and the beam body will be deformed, so, in order to ensure the stability of the structure, the beam body must be reversed, so that the position of the support point changes, so that the beam body deformation will not be too large, so as to ensure the stability of the structure.

Dear scum, I hope mine can help you <>

If you do a return beam, will there be a threshold too high to enter the door of the room?

Hello, dear. No, it won't. You talk to the decorator about your thoughts, and now these problems can be solved. <>

The return beam and the dark beam are stronger.

Hello, dear. The return beam is relatively strong. <>

Summary. The second layer is to reverse the beam, this is because the structural composition of the ring beam is composed of two support points and a beam body, after adding the second layer, the support point will change, the beam body will also change, and the beam body will be deformed, therefore, in order to ensure the stability of the structure, the beam body must be reversed, so that the position of the support point changes, so that the deformation of the beam body will not be too large, so as to ensure the stability of the structure.

Hello dear, it is recommended to use anti-beam. Because of the high cost of dark beams. And the anti-beam is on the roof of the building.

It does not affect the interior decoration in the future. It costs a lot to build a house. So it is recommended to use anti-beams.

If you do a reverse beam, will the threshold be too high when you enter the room door?

If that's the case, then use Mingliang?

I put it on the roof of the first floor. You can ask the workers who built the house.

The reverse beam and the dark beam are stronger.

The second layer is to reverse the beam to change the boy, this is because the structural composition of the ring beam is composed of two support points and a beam body, after adding the second layer, the support point will change, the beam body will also change, and the beam body will be deformed, therefore, in order to ensure the stability of the structure, the beam body must be reversed, so that the position of the support point hand faction changes, so that the beam body deformation will not be too large, so as to ensure the stability of the structure.

Summary. Dear, hello, there is a wall on the upper floor of the self-built house that can be used for dark beams.

Dear, hello, there is a wall on the upper floor of the self-built house that can be used for dark beams.

The use of dark beams is to enhance the horizontal resistance of the shear wall or to improve the stress distribution of the local vertical concentrated load. The main function of the dark beam is to increase the integrity of the structure, strengthen the out-of-plane stiffness of the shear wall, and the purpose of setting stiffeners for the steel beam in the steel structure. It is the concrete of the wall, and the dark beam is only added to the reinforcement cage specified in the specification.

The concept of beam in building structural mechanics can be popularly understood as: flexural members that bear vertical loads. Zen smile single beam, frame Zheng mu frame beam, even beam and other beam components have such a function.

However, some components named after beams do not fully have the function of shouting and attacking the forest, and one of them is the dark beam.

6 meters span without open sorghum, can the wall be load-bearing with dark sorghum?

Dear, you can afford it.