Xiaomi Phone 2 35y Flashing Problem! Please see the question addition.

Hello, it is customized based on the series, v4 is customized according to the custom, it is native without any modifications.

2.From the update to, you need to back up the data, go to the recovery update partition, and use the line brush to upgrade.

Please follow the flashing tutorial to flash the machine, and the sixth way is line brushing.

That is, Android is the native Android system v4 is based on the modification of the habits that are very suitable for the Chinese.

You can brush it directly, just like you play a game, all kinds of versions, all kinds of systems, just understand the phone as a computer. OK.

.35Y is a standard version, the same as v4, belongs to the v4 version, and v4 is newer than the version.

0 is v4.

It is the stable version of the MIUI system for Android.

It is the native Android version of Android.

v4 points MIUI development version and stable version:

The naming convention for the development version is the date, e.g. August 31, 2012, so that.

Stable version is named after it.

If you want to flash to v4, you have to enter recovery mode to get the next partition, which is quite easy to use.

3.After partitioning, you can directly flash both versions.

If the phone fails to flash, the phone will stay in fastboot mode and press any button without responding. It can be solved as follows:

1. Uninstall the driver of the Xiaomi phone on the computer, and then install the corresponding driver with the Xiaomi mobile phone assistant software on the computer, close the antivirus software during installation, and restart the computer after installation.

2. Change the data cable and connect the Xiaomi phone to the computer again.

3. Reinstall the flashing tool of the computer, that is, the miflash software.

4. After the installation is completed, open the miflash software, wait for the software to detect the Xiaomi phone, and after connecting, flash the complete system package into the Xiaomi phone again; Generally, if the flashing fails, you can brush it several times according to this method until it is successful.

Hello, here are the reasons for the failure of flashing:

You check it to see if there is any mistake in the operation, and then you back up and clear the data, and try to flash the computer again. Flashing method:

bPlease flash according to the flashing tutorial, the 6th type of flashing tutorial is the line brush.

If you still fail to flash your phone, you can go to Mi Home and ask the staff to flash it for you for free during the three-guarantee period.

Double clear or triple clear and update the partition and then flash the system, yes, all the previous content is cleared,In fact, it is the previous system grid。

From the system upgrade to v4, you must enter the recovery and repartition before you can flash normally. ‍

If you have backed up your data before, or there is no data in your phone that needs to be backed up, it is recommended that you try to enter recovery (turn off, press and hold the volume up + power on button to enter recovery mode) to empty all data, do not restore data temporarily after booting, see if it can solve the problem, if it still can't be solved, it is recommended that you try to brush the line to the latest development version to try.

Please flash according to the flashing tutorial, of which the sixth Fangling trapped style is the line brush:

Hello! 1.Clearing data in recovery mode will erase the data in the phone, but not the data on the memory device.

2.You can use Xiaomi's built-in backup tool to back up your data in advance.

3.The Mi 2 flashes in much the same way as the Mi 1.

Please flash according to the flashing tutorial, where the line brush is different.

Address the line brush of the Xiaomi Mi 2.

1.Running flash all except data will erase all data, including the stored data in the flash memory and the data in the ROM, which is equivalent to a meter 1 after formatting the memory card.

2.Running flash all except will retain the stored data and clear the user data, exactly like the Mi1 wire brush.

3.Running flash all user data and stored data are not moving, similar to the Mi1's card swipe.

You need to select one of them and delete the other two, otherwise the default is to run flash all except data.

You are welcome to ask questions on the Xiaomi Enterprise Platform.

It's okay to back up in advance without losing packets.

Hi! Hello. If you can enter the recovery, it is recommended that the three-clear system be re-flashed according to the line brush steps.

If you can't turn it on, it is recommended that you go to Mi Home or authorized after-sales service for inspection and maintenance.

At the same time, 9 Xiaomi Home in Beijing, Shanghai, Nanjing, Wuhan, Chengdu, Hangzhou, Xi'an, Shenzhen and Guangzhou have opened maintenance services. The working hours of Mi Home nationwide are from 10:00 to 18:00 from Tuesday to Sunday.

Normal flashing steps:

1. It is recommended that you use Xiaomi Mobile Assistant to back up your important data, or you can also use third-party backup software (contacts, text messages, ** and other data).

2. After backing up the system, empty the data: in the shutdown state, press and hold the volume plus key and the shutdown button, and let go when the boot screen appears, and you can enter recovery. Go to Recovery >Chinese>> >> Clear Data >> Empty all data.

Then flash the machine according to the flashing tutorial, it is recommended to use the line brush brushing machine.

3. Please flash according to the flashing tutorial, of which the sixth way is line brushing:

Hehe, dear, not so pessimistic. Unless the firmware is damaged, it can be repaired, I don't know your specific situation, the worst can take a strong flash to restore the system.

How to brush the machine with the small Bi Potato Nami hand and grandson machine?

The main reason for the failure to flash the device is that the device cannot be started due to the operation problem of the flashing package, you can try to reflash other ROMs.

You can try card swiping: use memory cards (SD, TF, etc.) to flash the machine, card swiping process:

3. Shut down, remove the SIM card, install the memory card, and it is recommended that the important things in the memory card should be backed up.

4. When the power is off, press the power button and the Yinchang volume plus button at the same time, about ten seconds, and then let go.

5. Enter the recovery mode, i.e. REC mode.

6. Select Wipe Cache Partition to clear the cache.

7. After clearing the cache, select Wipe Data Factory and restore the factory settings.

8. Select "Install Zip from SDCARD", the power button is OK, then select Apply SDCARD:update, and the power button is OK, that is, select the flash package from the memory card to flash the machine, and wait patiently for it to be completed.