How to turn C major to Bb with a capo

Updated on amusement 2024-05-12
7 answers
  1. Anonymous users2024-02-10

    BB major and C major main note difference of a major second (or minor seventh), if the two are very similar in the piano, but in the guitar, the tuned guitar is C major, we can't put the flip clip ten frets, so not only the fret becomes less and narrower and inconvenient for the left hand to press the strings, but also as the problem upstairs said, it completely destroys the most beautiful timbre of the guitar, it can also be said that such a high grade is no longer an effective range compared to the acoustic guitar, and the pronunciation is very dry and sharp. Therefore, in the guitar, we only have to adjust down to get BB major, and it is recommended that the best way for the landlord is to lower the guitar by a diatonic tune, the original six strings are 362573 (from six strings to one string), and you can get BB major by adjusting it to 251462. In fact, generally speaking, people who arrange guitars will take into account the difficult to achieve such transposition problems, and they will solve these problems through the use of chords, for example, a piece in G major will use G chord as the main chord, instead of having you clip the capo clip to the seventh fret C chord as the main chord (except for special song requirements).

  2. Anonymous users2024-02-09

    The capo clip is 10 frets, but usually no one does that, because the 1 pitch becomes too high, and the mid and high bass of the piano are not good.

    2 is also not easy to press (too crowded).

    Therefore, it is recommended to clip 3 frets and change the chord to a chord in G key (transposition means C becomes G, Am becomes EM, and that's fine.)

  3. Anonymous users2024-02-08

    Hello dear dear I am glad to solve the problem for you: how to change the key of B flat to the key of C, the answer is: to translate the key of B flat to the key of C or to change the key of B flat to the key of C.

    In the case of the former, then it is enough to turn all the notes up by a major second. In the latter case, it can be transposed using chromatic scales or genital chords. If it's a simple score, just change the key signature directly, if it's a stave, you put the G key, directly read the score in the first key, and change it to the B flat key, just pay attention to the use of some diacritical marks, such as the 1 in G key (that is, the 5 in C key) directly to the 1 in B flat (that is, the B7 in C key) The other sounds are the same.

  4. Anonymous users2024-02-07

    C is 1, B is 7, 1 and 7 are separated by half a note, that is, the standard C key of the empty strings can be lowered by half a note, that is, all 6 strings are loosened according to the regularity.

    Variation scale: A variation scale is a scale that contains rising and falling marks, which is the addition of a rising and falling semitone between each whole distance of the natural scale. 1=b2, 2=b3 These are homophones, but different names.

    There are many ways to record **, such as staves, simple staves, hexagrams, etc. For example, in the notation, the notation that records the height and length of the note is called a musical note, and it is composed of seven Arabic numerals or other symbols.

  5. Anonymous users2024-02-06

    1. C key is a natural major key that begins with the C tone, composed of C, D, E, F, G, A, B, and is a key without sharp and flat signs.

    2. D is a natural major key based on the D (re) tone, which is composed of D, E, F, G, A, B, and C. There are two sharp keys in the key signature, B minor and D minor in parallel minor.

    3. E is a natural major key based on E tones, consisting of E, F, G, A, B, C, D, and E, with four sharp signatures. The relative minor key is C sharp minor, and the parallel minor key is E minor.

    4. F is a natural major key based on the F tone, consisting of f, g, a, b, c, d, e, and f, with a flat sign in the key signature. The relative minor key is D minor, and the parallel minor key is F minor. Lowering the B note of the third line on the staff by a minor second gives the key signature of F.

    5. G is a natural major key with G as the central tone, consisting of G, A, B, C, D, E, F and G. Parallel minor is E minor, and the staff is counted as a sharp, which is equivalent to a fa in C major.

  6. Anonymous users2024-02-05

    I'll teach you how to look at this diagram. For example, if you want to convert a song that was originally in the key of G to BB to play, assuming that the chord of the original song in the key of G is G-BM-CMAj7-D7, first find these 4 letters GBCD as the ordinate in the first row of the table, and then find the key G as the abscissa from the first column on the left, and then find out that the corresponding number is Then look at the line of BB The corresponding letter is BB-D-Be-F, and finally the chord nature corresponds to BB-DM-BEMAJ7-F7, and then it is OK.

  7. Anonymous users2024-02-04

    C to flat B All notes are shifted down by a major second.

    g to flat b all notes up a minor third.

Related questions
7 answers2024-05-12

As we all know, Nero is an excellent disc burning software, and it has always been praised for its power and stability. >>>More

8 answers2024-05-12

If you just make a separate app (instead of engaging in the secondary development of the framework), qt can barely make up the number. Although it is not pure C++ (relying on MOC QML), the overall tools (build tools, designers, IDE integration including VS) are relatively high, and they also support multiple mainstream platforms (Windows, Linux, OS X, etc.), with relaxed license requirements (LGPL), optional commercial support, and relatively low risk for individual APP projects. Although the binary size that needs to be released is still on the large side, it is easier to do than the mainstream web and. >>>More

7 answers2024-05-12

#include

#include >>>More

8 answers2024-05-12

Isn't it over if you do a division of seconds?

10 answers2024-05-12

1 First of all, click [File] and select [New] to select [C++ Source File] in the file, enter the [File Name] to be created, and select the location of the file to be saved] is [browsing] Knowledge: The shortcut key for [New Deslag Removal File] is [Ctrl+N] 2 Next, you can [write a program] in the newly created file After the writing is completed, click [Compile [File Name]] in [Component (B)] Tips: The file name is as shown in the following figure [Nazhen quietly has a small asterisk, indicating that there is an unsaved part in the file, so at this time, you can press the shortcut key [Ctrl+S] to save the file.