-
Anonymous users2024-02-09Return your network card, it's not a problem with the network card, display 10m or 100m depends on the hub you use, if you use a 10m hub (hub) will display 10m, if you use a 100m switch will display 100m. This data has no effect on your internet speed at all, and a bandwidth of 1M is completely sufficient with a 10M hub. In addition**speed does not depend entirely on your network card and broadband, it depends on which server **, if you are a Netcom user, you have to go from the Netcom server**, telecom users from the telecom server**, don't just in one**test, go to a few more large**find the corresponding server**.
-
Anonymous users2024-02-081) If it is a problem with the broadband itself, first directly connect the broadband network cable to test, if it is a broadband problem, contact the broadband customer service to solve it.
2) If it's a problem with the router, if it can be used originally, it can't be used for the time being, my own practice is to disconnect the power of the router and plug it in, and I'll take a look. In there is a factory reset, it can be used from the new settings (this is under the premise of the correct physical connection, sometimes caused by the router's slow or failed IP address search, not that the router is broken).
If it can't always be solved, it is recommended to give the router's customer large size service **, they have **** guidance bends, I encounter problems that I can't solve, it is very useful to consult the advice they give, and they will give correct suggestions for your settings or operations.
3) If you turn off the wireless switch, it's on, if it's a rolling high wireless connected by software, it's normal for the software to be bad and often have problems, there's no better way, use a router. In addition, it is caused by the network card driver is not or is not suitable, and whether there is a problem with the network cable interface or network cable.
4) If it is caused by a system problem, it is recommended to restore the system or reinstall it.
5) If you have any questions, please ask me.
-
Anonymous users2024-02-07Network disabled, rebooted.
-
Anonymous users2024-02-06It's in arrears. The line is broken. The network is down. The account password is incorrect.
-
Anonymous users2024-02-05If it's just a matter of time sooner or later, you might as well right-click to disable it and then turn it on, or restart the computer will also improve.
Experience: Web Applications:[22] Limited or No Connection.
-
Anonymous users2024-02-04You have to ask the broadband company, this is not the Internet.
The local connection can't be connected, is there a red cross on the computer icon in the taskbar? Generally, the network cable is not plugged in, and another reason is that your network card is not plugged in, or the "cat" is turned off, anyway, as long as the interface of the network cable is plugged in, the light is not on or flashing, and the local connection will not be connected.
It's okay, every time you boot up, you start getting the IP locally, and then you can have a broadband connection, nothing at all.
How to disable local connections at boot.
Before shutting down, open the Control Panel Network Connections, right-click on the network you are currently using (in this case, Local Connection2), and select Disable. >>>More
According to what you said, the network card 8139 is fine, the network cable is fine, the switch is fine. >>>More
1. Has your computer been touched recently? In particular, have the ADSL modem wiring and lines been moved? Please check whether the signal light on the "cat" will flash (the cat is different, the indicator light is also different, mainly dsl, adsl, line, link, @等都是宽带信号指示灯), if you want to flash, check whether the line is connected to the pair (mainly on the separator, there are three ports, each port corresponds to a line, the connection method is the bus is the incoming line port, ** machine connected to the phone port, in addition to modem or adsl connected to the broadband cat, you can also directly connect the ** incoming line on the cat to try, This can rule out the bad separator), if the connection is still flashing, check whether the line has a joint, and the signal will not be stable if the line oxidation contact is not good (the crystal head or line of the line into the cat has a problem, which will also cause the line to be blocked. >>>More