Sweeper manufacturers What do you need to pay attention to when purchasing workshop sweepers?

Factory sweepers.

1. Choose different types of sweepers according to the size of the factory workshop. If the factory workshop area is less than 3000 square meters, the area is relatively small, you can choose a small walk-behind sweeper; If the workshop area is more than 5,000 square meters, it is necessary to choose a driving sweeper with higher cleaning efficiency. The ride-on sweeper and the walk-behind sweeper work the same, both of which concentrate the garbage and dust in the middle of the equipment through the side brush, and then throw the garbage into the trash can through the main brush; The fine dust particles are sucked into the trash can through the fan, and the working principle is basically the same, but the volume and working efficiency of the equipment are still very different.

2. Choose according to the environment of the factory workshop. Generally, if the workshop area is relatively small, it is recommended to buy a hand-pushed sweeper, and it is recommended to buy a driving sweeper with a relatively large and empty cleaning area. If the dust in the factory workshop is too large, you can choose a sweeper with sprinkler function, which has the effect of dust reduction, which can avoid secondary dust and cause secondary pollution.

3. Choose the right sweeper according to the type of ground in the factory workshop. The floor on the factory floor is mostly concrete, terrazzo and other similar floors, and walk-behind and ride-on sweepers are usually used on these hard floors.

Whether it is to buy a sweeper or other things, the brand is at least reassuring, the brand can be a household name, indicating that the strength of the enterprise is very strong, there is no doubt about this, so that the after-sales service will also be guaranteed.

Everyone must pay attention to the above three points when buying a sweeper. The last point of the sweeper is to choose high quality, the quality of the sweeper is the title that buyers are very concerned about, the quality of the quality is directly related to the maintenance cost of the sweeper in the later stage, the service life of high-quality sweepers is long, and the maintenance frequency of sweepers is lower.

First, it should be considered from the brand and quality. Most of the strength of the manufacturer determines the quality of the product, so if you want to buy cleaning equipment, you can search the whole network, learn about the major brands of electric sweepers, do analysis, and then choose one to go to the field.

2. Consider whether the performance and parameters of the product can meet your needs. For example, the sweeping width of the electric sweeper, whether the motor power of the electric sweeper can ensure its work efficiency, and whether the applicability of the electric sweeper is suitable for the ground material, area and garbage type you are sweeping.

Third, the consideration is the after-sales service of the sweeper manufacturer. No matter what product you buy, choose a manufacturer that offers good after-sales service. Because mechanical products have been used for a long time, there will always be large and small problems, which need to be solved after sales.

Therefore, we must choose a sweeper manufacturer with a perfect after-sales service system, so that the majority of users can buy with confidence.

Fourth, than **. For **, in general, the market is the same, the brand of sweepers is not much different, it is important to choose and understand the quality of accessories, battery brand, product performance and after-sales service.

In order to ensure the cleaning effect and service life of this large sweeper, the operator needs to learn how to maintain the sweeper's motor.

1. At the end of each day, the display prompts 20-30% of the remaining power, and it is necessary to charge it in time, because excessive discharge will affect the battery life.

2. When the charger cannot be replaced, the matching charger should be used for charging.

3. For the newly purchased sweeper from Kuaiba, do not charge it at will for the first time. After using the charge, you should recharge it and saturate it a few times before charging.

4. When charging the battery, please make sure that the socket power supply is in good contact and the charger plug is in good contact with the battery plug. Bad contact may cause damage to the charger and failure of the battery.

5. The charging voltage of the large sweeper to be highlighted must be kept in a stable state. This will easily lead to damage to the cleaning battery or reduce the life of the battery.

6. After using the battery power, it should be charged within 24 hours. If the battery is not charged for a long time, it will also shorten the life of the battery.

7. If it is not used for a long time, the sweeper should be charged every two months to ensure that the battery will not damage the battery life for a long time without using electricity.

First check the integrity and wear degree of each brush seal of the hand-pushed workshop sweeper, replace the seal and roller brush with severe wear, and check the tension of the connection part when replacing it together, and use the corresponding thing to tension it.

Open the cover of the hand-pushed workshop sweeper, and we also need to borrow a special cleaning agent to clean the parts with serious oil stains.

Do a good job in the maintenance and cleaning of the dust box and filter of the sweeper in the hand-pushed workshop, clean the parts with serious pollution, and replace and adjust the damage of the filter.

For the electric hand-pushed workshop sweeper, we should focus on the overhaul and maintenance of its controller and motor, and find professional technicians for maintenance of the hand-pushed workshop sweeper that is not operating properly and is too noisy.

As the main power source of the sweeper, we need to do a good job in its maintenance, and first check whether it is normal after one year of use.

The factory workshop is suitable for small sweepers, and the GM-Minis mini electric sweeper is recommended, with a sweeping efficiency of up to 4200 square meters per hour. Suitable for workshops, exhibition halls, squares, campuses, parks, etc. Small and exquisite, can clean the garbage in a small area, ** more moderate, this sweeper, quite popular in the market.

Hope solves your problem, hope.

What kind of sweeper is used in the factory floor depends on the area of the workshop, the type of dust and waste in the workshop, and so on.

In general, the workshop uses a small sweeper.

1. Grasp the principle of practicality. Be sure to choose the style and performance of the walk-behind sweeper that suits your situation.

2. Be sure to hang a cost-effective sweeper. Hand-pushed industrial sweepers are not as good as other daily necessities, although they are not very high, but they are not cheap. What's more, the purchase of walk-behind sweepers is often used for large-scale floor cleaning, and quality is an element to be considered.

At present, there are many domestic hand-pushed sweeper brands, and they are relatively low, and they can afford to maintain and replace the accessories after wear, and they should pay attention to the quality of the machine, after all, they get what they pay for, and high cost performance is a good choice.

3. See if you have good after-sales service. When purchasing a hand-pushed sweeper, you should pay attention to whether it is a sun-modified imitation of whether it has after-sales service or service stations, because when the hand-driven sweeper you purchased fails, you need to give a timely solution and follow-up normal maintenance.

See what makes it work.

The electric sweeper in the community mainly concentrates the garbage in the place where the roller brush can not be swept into the area where the main brush can reach through the side brush from the outside to the inside; The roller brush then rolls and sweeps the garbage, even the larger garbage, to the garbage storage bin; The air extraction system located at the front of the sweeper can generate a very large suction power, and then filter out the dust through the filtration system to avoid the exhaust gas polluting the environment and causing harm to the health of the sweeper operator.

Cost of use. The cost of use is composed of two parts, that is, the first cost of the electric sweeper in the community and the replacement cost of wearing parts. The wearing parts are the side brush and the main brush, which need to be replaced if the wear is serious.

Applicable place floor.

The electric sweeper in the community can clean the ground such as cement, asphalt, plastic, marble, etc., as long as it is a hard and flat ground can be used, the ground is potholed or has speed bumps, and the loss of Li should be avoided as much as possible, and the ground with water accumulation also needs to be used with caution. The use of electric sweepers in the community is quite extensive, and can be used in factory workshops, property communities, scenic spots, squares, etc.

The type of garbage that can be used to clean up garbage.

Common household garbage can be cleaned, such as cigarette butts, leaves and branches, small stones, sediment, etc., and industrial iron filings, wood chips and other dust garbage can be cleaned. However, the electric sweeper in the community cannot sweep the corrosive garbage and the garbage with chemical reagents.

1. As a pure electric drive machine, the sweeper does not need to produce oil and gasoline and other first-class energy, does not produce exhaust emissions, and will not bring air pollution and other problems, and it is also affordable in use, only the daily electricity cost and maintenance and repair costs.

Second, it is suitable for a wide range of ground, most of the factory hard ground is suitable for: wood, marble, floor tiles, rubber, polished cement floor and so on. It is easy to use, saves time and effort, and can be used anytime, anywhere.

3. The design of the side brush and the main brush is adopted, and the side brush can make the garbage collect to the main brush, which can clean the dirt in an all-round way. Dust, sand, hair, paper scraps, iron chips, etc., generated by the factory, can be well handled. The floor swept by the sweeper is as smooth as new, and with a simple push, you can bring garbage and debris into the dust box.

Fourth, improve the cleaning efficiency of the factory, to a certain extent reduce the cleaning work, originally needed several cleaners to complete, now only need one person a sweeper to complete, greatly saving costs.

1. Time-saving, labor-saving and efficient cleaning and collection are completed at the same time, and the sweeping efficiency is 4-6 times that of manual work.

2.The wear-resistant machine is made of engineering plastics, which is corrosion-resistant, aging-resistant, and does not change the shape of the machine.

3.The machine only needs to be pushed by manpower to complete the cleaning work, and Baochang Xiao has proved the efficiency of the work!