There is a problem with the design of the Supor stainless steel pressure cooker. Old air leak

I bought the Supor good helper stainless steel pressure cooker 22cm I also changed two rubber rings, I thought it was a problem with the rubber ring, and I bought more, all of which were bought Supor** rubber rings are useless and have been leaking air can only be placed next to idle.

It's definitely a matter of design ...

How to defend your rights?

Down with the Supor stainless steel pressure cooker leaking I will never buy any Supor goods again I will also tell my friends and family to stay away from Supor to avoid being harmed!

Since there is a problem with the design, it should be recalled, bad companies, big stores bully customers!

This is a stainless steel pressure cooker, sometimes it leaks, sometimes it's fine, especially when the soup is simmered, it leaks all over the kitchen, and it is a tiring job to cook and clean for half a day. I didn't even dare to use it, but today I tried it again and did it again. This time I prepared in advance, quickly got it into the vegetable sink, and soaked it in cold water so that it didn't squirt too much.

Buying such a pressure cooker really became a heart problem. I really don't dare to use it. Where can I defend my rights?

I took the pot to the after-sales service and said it was no problem. This one is definitely a design problem. We want to defend our rights, and where can we defend our rights.

I'm having this issue too! Is there a way?

No seals are installed. Solution: This one is easy to check out. Attach the sealing ring and you're good to go. Be careful to use seals of the same size.

2.Food residue sticks to the upper end of the sealing ring or inner tank, resulting in a poor seal. Solution: Check the perimeter of the sealing ring and the upper end of the inner tank to see if there is any residue, and clean it up. The seal can also be removed and cleaned up.

3.The seal is aged and cannot be sealed. Solution: Remove the sealing ring, check it, if the elasticity is not good and a little hardened, then replace it with the sealing ring of the same specification.

4.There is a foreign object on the bottom of the rice cooker, which causes the inner tank to not lie flat. Solution: Inspect and clean the bottom of the electric pressure cooker.

5.The upper end of the inner tank is uneven. This is rare, for example, when the inner tank is broken.

How to deal with the leakage of the Supor electric pressure cooker valveHello dear, 1. Solve the deformation of the inner pot mouth: replace the inner pot 2, the inner pot cover, sealing ring, sealing fixing ring and other parts of the fault solution: repair the inner pot cover, remove the sealing fixing ring hair-stripping or replace the sealing fixing ring.

3. Ball pad rupture or size deviation solution: replace ball pad 4, rice milk or foreign body blockage caused by exhaust Solution: Regularly clean ball pad and steel ball 5, ball gasket sealing ring broken or steel banquet without ball deformation Solution:

Replace the ball gasket sealing ring or steel ball 6, the solenoid valve stem and the sealing ring against the steel ball Solution: Check whether the sealing ring is closely matched with the rod valve or replace the solenoid valve 7, check the crack of the sealing ring of the open rod or the foreign body in the hole Solution: Replace the seal ring of the stop rod or remove the foreign body 8, the hole of the stop rod is crooked or the size is too small (the stop rod can not rise normally) Solution:

Replace the inner pot cover 9, safety valve failure or safety valve seal ring rupture Solution: Replace the safety valve or its sealing ring 10, the pressure is too high due to the loss of control of the control board Solution: Check whether the relay and its related circuit components are damaged, and check whether the thermistor resistance is normal.

Hello dear, Supor pressure cooker pressure early shot balance valve non-stop spitting is the cause of the failure phenomenon: Supor electric pressure cooker in steaming rice, the lid is on top of the handle part of the position is a little leaky, the most important thing is in the pressure holding state time limit pressure valve in the sealed state 2, fault solving: the electric pressure cooker has a leakage fault, check your electric pressure cooker's land limit to do the pressure valve silicone sealing ring and float valve silicone sealing ring, if there is no problem, that is the problem of the pressure switch, adjust the pressure switch to reduce the pressure.

An electric pressure cooker with a leak will cook rice. And the body is prone to high temperatures, which will burn out a lot of things, don't force him to use it, take it for repair as soon as possible.

1. The inner pot mouth is deformed.

Solution: Replace the inner pot.

2. Failure of the inner pot cover, sealing ring, sealing fixing ring and other parts.

Solution: Repair the inner pot lid, remove the hair-stripping of the sealing ring or replace the sealing ring.

3. Ball pad rupture or size deviation.

Solution: Replace the ball pad.

4. Blockage of rice milk or foreign bodies caused by exhaust.

Solution: Clean the ball pad and steel ball regularly.

5. The ball gasket sealing ring is broken or the steel ball is deformed.

Solution: Replace the ball gasket seal ring or steel ball.

The overflow phenomenon of electric pressure cooker is due to the displacement of the pressure switch in the pot, resulting in the working air pressure in the pot exceeding the limit pressure of the lid of the pot, and the overflowing pot will occur. Or the sealing ring of the lid is broken, and the pot will overflow.

If there is an overflowing pot, for safety reasons, the cause should be found in time for treatment. If you can't solve the electric pressure cooker you just bought, it is recommended to contact the after-sales staff for testing, repair or replacement of accessories.

Supor sounds very good, I personally experienced, the Supor soybean milk machine I bought in the middle of 11 years was used until the Spring Festival of 11 years and was not used. Until today, I put it for more than a year, and when I found it out today, it didn't heat it up! Put.

Ridiculous, you say? Look for after-sales service and listen to the heater may be broken, and it will be almost 70 if you change it! It's really black, a quarter of the whole machine!

This model of electric pressure cooker, if the stop valve overflows, you check whether there is something stuck in the stop valve, the stop valve does not fall, and the stop valve will not overflow again, I hope it will be useful to you.

This pressure limiting valve has no high and low gear, it can be placed in a sealed state when working, and it is necessary to check the check valve there, this position will be exhausted when it is lower than 4kpa, this process is called exhaust air conditioning, in order to make the relationship between temperature and pressure in the pot more real, here you need to check whether the check valve can rise and fall smoothly, check whether the hole of the stop plate is out of place with the check valve, under normal circumstances, the check valve should pass through the hole, rise to achieve the purpose of sealing pressure,

Reasons for the leakage of the old pressure cooker of Supor code:

1. The sealing rubber ring is aging and needs to be replaced.

2. The exhaust nozzle is loose and can be tightened.

3. Replace the gasket if the seal is bad.

4. The inner tank side is collided and deformed, and it is directly replaced.

5. Replace the exhaust valve pin if it is damaged.

6. Air leakage caused by overpressure needs to be sent for repair to measure the pressure.

The electric pressure cooker is an upgraded product of the traditional pressure cooker and the rice cooker, which combines the advantages of the pressure cooker and the rice cooker, completely solves the safety problem of the pressure cooker, and relieves the safety hazards that have plagued consumers for many years with ordinary pressure cookers, and its thermal efficiency is greater than 80%, saving time and electricity.

Causes of Supor electric pressure cooker leakage:

1. The sealing rubber ring is aging and needs to be replaced.

2. The exhaust nozzle is loose and can be tightened.

3. The sealing gasket is rough and bad, and it should be replaced.

4. The inner liner is collided and deformed, and it is directly replaced.

5. Replace the exhaust valve pin if it is damaged.

6. Air leakage caused by overpressure needs to be sent for repair to measure the pressure.

The electric pressure cooker is an upgraded product of the traditional pressure cooker and the rice cooker, which combines the advantages of the pressure cooker and the rice cooker, completely solves the safety problem of the pressure cooker, and relieves the potential safety hazards that have plagued consumers for many years with ordinary pressure cookers, and its thermal efficiency is greater than 80%, saving time and electricity.