The triode 78L05 is not withdrawn like other transistors

Updated on technology 2024-05-23
5 answers
  1. Anonymous users2024-02-11

    It's not a triode, it's a three-terminal.

    78L05 Description;

    The 78L05 is a fixed voltage (5V) three-terminal integrated regulator that is suitable for a wide range of applications. As in the case of single-point regulation, it is necessary to limit noise and solve distribution problems in in-card regulation. In addition, they can be used in conjunction with other power transfer devices to form a regulated power supply with high currents, such as regulators that can drive output currents up to 100 mA.

    Its excellent internal current limit and thermal shutdown characteristics make it particularly suitable for overload situations. When used to replace the traditional Zener diode-resistor bank, the output impedance is effectively improved and the bias current is greatly reduced.

    This paragraph. 78L05 characteristics.

    Three-terminal regulator.

    The output current can reach 100mA

    No external components are required.

    Internal thermal overload protection.

    Internal short-circuit current limit.

    Since the end of 2004, all types of packaging forms provided are lead-free packaging products.

    This paragraph. 78L05 Application Notes.

    If the regulator is some distance away from the power filter, CIN is required and CO is optional for stability, but it does improve transient response.

    This paragraph. 78L05 Applications;

    Networking products. ***-rom,cd-rom。

    Sound card and computer motherboard.

    Linear regulated source.

    Controller. This paragraph.

    78L05 Typical Circuit Diagram;

    Concentrate; (1) To determine the output voltage value, select the voltage value suffix (xx)2) For the best stability and transient response, it is recommended to use a side capacitor and install it next to the circuit as much as possible.

    This paragraph. 78L05 internal circuit diagram;

    78L05 internal circuit diagram;

    This paragraph. 78L05** Analysis:

    The three-terminal voltage regulator 78L05 has a high degree of attention on the web page, and the number of inquiries and ** appears frequently. There are also certain differences in the ** reported by different packages, and the average ** of ST brand's TO-92 package format is meta PCS; The packaging format of SOT89 is relatively high, with an average of yuan PCS. According to the analysis of Huaqiangbei index analysts, refer to Huaqiangbei market.

  2. Anonymous users2024-02-10

    It's definitely different, you'll know for yourself.

  3. Anonymous users2024-02-09

    78L05 is not a triode, it is generally used in the protection circuit of DC circuit, which plays the role of voltage reduction and voltage stabilization. The input voltage is generally not too large, less than 36V, and the back is often out of the oak L or H or blank to represent the rated current.

    78L05 and 7805 are three-terminal regulator integrated circuits, the number behind 78 or 79 in the series of integrated voltage regulator IC models represents the output voltage of the three-terminal integrated voltage regulator circuit, such as 7806 means that the output voltage is positive 6V, and 7909 means that the output voltage is negative 9V.

  4. Anonymous users2024-02-08

    The 78L05 is not a triode, but a three-terminal regulated integrated circuit with an input voltage of about 10V and a stable output of 5V. Commonly known as three-terminal voltage regulation, 7805 generation can be used.

  5. Anonymous users2024-02-07

    78L05 is not a triode, 78L05 and 7805 are three-terminal regulated integrated circuits, the output voltage is 5 volts, the only difference is that the output current is different, the maximum output current of the former is only 100 mA, and the maximum output current of the latter can reach ampere. They don't have the same pinout, and for the 78L05, you face the model, and from left to right the pins are output, ground, and input.

Related questions
14 answers2024-05-23

In order to make the transistor work in the amplified state, a bias resistance and a collector resistance are set in the triode circuit, and the output voltage is obtained by dividing the voltage of two resistors, which is a fixed bias amplification circuit, and there is a partial bias amplification circuit. I've been studying lately, so I can only explain that, and there's a lot more to come. It's complicated.

7 answers2024-05-23

Forward bias: The voltage at the p-terminal is higher than that at the n-terminus. >>>More

7 answers2024-05-23

The tube voltage drop UCE means that the voltage between the collector and the emitter is normal.

6 answers2024-05-23

Choose Huaxin Optoelectronics, the company's product range mainly covers LED lighting, LED lighting, LED lights, LED backlight drivers, smart homes, LED displays, etc., our company launched a driver-free dimmable constant current driver IC, high efficiency, high PFC, widely used in integrated photoelectric modules, COB products, improve the reliability of LED lighting products, improve the production efficiency of products, and provide a core solution for solid-state lighting.

16 answers2024-05-23

The inventor of the vacuum triode was the American scientist Lee de Forest (1873 - 1961). In 1904, Fleming invented the first electron tube by adding a plate pole in front of the wire (filament) heated in a vacuum He called this kind of electron tube with two poles diode Using the newly invented electron tube, the current can be rectified, so that the ** receiver or other recording device can work Nowadays, when we turn on an ordinary tube radio, we can easily see the tube with the filament burned red It is the heart of the work of electronic equipment and the starting point of the development of the electronics industry.