Where to twist the guzheng tuning in the past The guzheng tuning is tuned, and the inside is still t

Runyang will help you answer:

Guzheng tunes the strings, twisting it in is getting closer and closer, and the outside is getting looser and looser, to match your tuner to see, if the tone is relatively low, twist it inside, and twist the pitch outside. Hope.

Guzheng tuning generally needs to prepare a tuner and a tuning wrench, turning the wrench to your body here is a loose string, in the case of the tone is already high, you need to loosen the string, make the tone low; Turning the wrench to the side away from the body is a tight string, and when the pitch is low, the 1st string is the thinnest, the 21st string is the thickest, and pushing the wrench in the direction of the 21st string is the tight string.

Take the 8th string as an example, dial the 8th string, if it shows 8a, it means that it is not far from the standard tone, look at the position of the tuner pointer and the light on the tuner, the red light on the left is on, the pointer is on the left, it means that the tone is low, and the string should be tight, if the display is 8a, the red light on the right is on, and the pointer is on the right, which means that the pitch is up.

Take the 8th string as an example, dial the 8th string, the number displayed is larger than 8, it means that the tone is low, the display is 9f, 10e, the tone is low, this time should be tight, if the 8th string comes up, it will show 6d, or 7b, it means that the tone is already high, it is higher than the standard tone of 8a, and the string has to be loosened at this time.

Zither. Tuning: Up is tight, down is loose, you need to play it, compare according to the tuner, and then choose up or down, until the pitch is fine.

Twisting in is getting closer and closer, and the outside is getting looser and looser. To match your tuner, if the pitch is low, twist it inward, and the pitch twist it outward.

The pins can be adjusted. 1. First put the guzheng on the table, and then open the box at the end of the guzheng head.

2. After opening the box at the tip of the guzheng, take out the wrench.

3. Put the wrench on the strings of the zither, and then adjust the tightness of the strings of the zither with the help of a wrench.

4. Turn the wrench forward to raise the tone, turn backward to turn the tone low, and adjust it freely as needed.

Tight strings don't crush the top, but the strings break easily. First of all, make sure that the tuner shows the key you want to tune (usually the new piano is in the key of D); whether the frequency shows 440; Whether the tone you are tuning corresponds to the number of strings displayed by the tuner.

If these are all right, and the strings are tight, you can move the saddle slightly to tune it. If the tuner is low, move the saddle a little to the right, and vice versa to the left. If it still doesn't work, it is recommended to ask the piano teacher to come to help you tune.

The strings of the guzheng have been adjusted to the tightest, but the sound still can't go up, which is usually caused by the incorrect tuning. If the saddle is not aligned, even if the string is just aligned, it is easy to go out of tune. Be sure to align the saddle perpendicular to the strings so that the strings fit into the grooves of the saddle, so that the pitch will be relatively stable.

When tuning, pay attention to the appropriate dynamics, and when playing at different strengths, the amplitude of the string vibration will also change accordingly, so the pitch of the sound will be different depending on the frequency of the string vibration.

In addition, the frequency of the string vibrations changes when playing in different positions, especially when playing the bass vigorously. It is best to tune in a relatively uniform position to ensure that the amplitude of the string vibration is also relatively the same.

The strings of the guzheng are very tight and have not yet reached the pitch, generally adjust the saddle (1 string and the front mountain 15mm distance), and then there may be a problem with the electronic sound effect, you pay attention to listen to the lower tone may be turned up, so it is best to tune the guzheng strings with your ears, and the electronic tone is attached.

Tuning the saddle, move to the right, and if you get to the end, you have to loosen it, lower the strings and put them back on.

Summary. Hello kiss <>

The zither wrench is used to lower the pitch of the zither when twisted to the left, and the zither is twisted to the right to raise the pitch. A zither wrench is a tool used to adjust the strings of the zither, which can adjust the tension of the strings, thus changing the pitch of the strings. If you want to lower the pitch of the zither, you need to reduce the tension of the strings, and then you need to twist the zither wrench to the left.

Specifically, when we are facing the guzheng, we can lower the pitch of the guzheng by twisting the guzheng wrench to the left; Twisting the zither wrench to the right can raise the pitch of the zither. It should be noted that in the process of adjusting the pitch of the guzheng, each string should be adjusted one by one to ensure that the pitch of the entire guzheng is accurate.

Which way the zither wrench is adjusted is lowered.

Hello kiss <>

The zither wrench is twisted to the left to lower the pitch of the zither, while the right twist is to raise the sturf of the branch. A zither wrench is a tool used to adjust the strings of the zither, which can adjust the tension of the strings, thus changing the pitch of the strings. If you want to lower the pitch of the zither, you need to reduce the tension of the strings, and then you need to twist the zither wrench to the left.

Specifically, when we are facing the guzheng, we can lower the pitch of the guzheng by twisting the guzheng wrench to the left; Twisting the zither wrench to the right can raise the pitch of the zither. It should be noted that in the process of adjusting the pitch of the guzheng, it is necessary to adjust each qin one by one to ensure that the pitch of the entire guzheng is accurate.

Is it lower to sit in front of the guzheng and twist it to your side?

Yes, kiss.

The steps for transposing the guzheng in the playing are as follows:

The modulation of the guzheng refers to raising or lowering the original key to change it into another key. Specifically, the pitch positions of the 21 strings were rearranged. Guzheng is a pentatonic scale to set the strings, and the commonly used keys are to "shift the column" to achieve the purpose of "transposing".

For example, on the basis of the D key, move all the "3" of the D key to the right and raise the semitone; Moving the saddle of the first string towards the mountain, all four strings are raised by semitones, and the scale of each octave becomes the key of G.

Guzheng usually uses a close relationship transposition, that is, the relationship between two tones is only one sharp or one falling tone.

Guzheng is a pentatonic scale to set the strings, and the commonly used keys are to "shift the column" to achieve the purpose of "transposing". The transposition order of the commonly used tonal characteristics of the guzheng is as follows: f <-b <-e <-a <-d --g --c --f --bb --be

You can quickly shift the frame, but at most move one or two, for example, sometimes C to G or D to G to an octave only need to move one... There are many restrictions on fast frame shifting, and it is generally not possible to transfer. Either press the strings to transpose, press the strings with the left hand to raise the specific note, and the hand is faster.

Think about how that could be. Guzheng modulation needs to tune the piano yard, string shaft, and listen to the pitch is right, how to do it without stopping?

Who told you that you can transpose while playing the guzheng? If you don't understand it, it's just **.

Fast frame shifting. It has to be very fast and the amplitude is accurate. If the yard falls, it will be miserable! I've done it! Don't listen to the nonsense from upstairs!

It is recommended to use a tuner for beginners, and the ears will naturally hear it after turning too much.

Generally, there is a number label of 1-21 on each piano yard, and it is placed from 1-21 in order from bottom to top. The distance in each saddle should be suitable for the timbre match, neither too wide nor too narrow

The first string should be about 16 cm away from Mount Maedake, the eighth string should be about 32 cm, the thirteenth string should be about 49 cm, and the twenty-first string should be about 45 cm away from Mount Houyue. This is the result of special research by experts. The Zheng yard is placed too close to Yueshan, it is difficult to adjust to the standard pitch and it is easy to jump the code, and it is too far away from Yueshan that the left hand is not easy to press the strings; Fourth, the height of Yueshan Mountain.

If the mountain is too high, it seems that the height of the zither yard is not enough. These factors will affect the playing of the guzheng, and it is easy to produce code hopping.

In addition, generally speaking, the first three strings are closer to each other, and the fourth string is far ahead. You can start with a 5 (the green one if it's a d) and then slowly tune the other notes