-
Anonymous users2024-02-10I don't know which model of product you are, it is recommended to call the manufacturer directly.
I've done 602's :
Press the "0" button, more than 3 seconds, the screen displays "pw0", enter the project password (default 000000), display "menu", press "3", display "card", and enter the programming of the registered IC ID card.
The first type: card number registration: press "1" again, display "rgen", directly enter the ID card number (enter the first three digits first, display the --- and then enter the last five digits), press " " to confirm.
The second type: credit card registration: press "2", display "REG", rely on IC card.
Read the card and display the card number "**
Press "*" to exit.
Be sure to look at your product model and consult the manufacturer, what card, IC or ID, this is very important.
-
Anonymous users2024-02-091.Find the information to check the model, find the corresponding manual and read, there are instructions for making the mother card.
3 If there is no network, change to an access controller, re-register all cards, and let the newly bought access control manufacturer register.
4.Don't think about software card issuance,You have been useless community,It is estimated that the intercom access control linkage is almost broken,If there is no software,Buy a software are on thousands,It's not worth it。
-
Anonymous users2024-02-08Hello, it is a pleasure to serve you and give you the following answers:1Call the other owner number Bizhi Code:
1) First of all, log in to the network access control system, and find the owner number to be dialed in the "owner management"; (2) Then, click the "Dial" button and enter the owner number you want to dial; (3) If you regret Zheng Min the most, click the "OK" button to call the number of other owners. 2.Causes of the problem:
1) Improper setting of the network access control system; (2) The software of the network access control system is malfunctioning; (3) The hardware of the network access control system fails. 3.Workaround and Procedure Steps:
1) Check the settings of the network access control system to make sure the settings are correct; (2) Check the software of the network access control system to ensure that the software is operating normally; (3) Check the hardware of the network access control system to ensure the normal operation of the hardware cong hail; (4) If none of the above checks find any problems, you can try to reinstall the software of the network access control system to ensure the normal operation of the system. 4.Personal Tips:
When using a network access control system, you should regularly check the system's settings, software, and hardware to ensure that the system is functioning properly, as well as to identify and resolve issues in a timely manner.
With embedded microcontroller electronics as the core, it is necessary to master circuit hardware and software programming.
Main items: building intercom equipment, including host, extension, fence machine, decoder, power supply, networking function, as well as networking, management center machine. >>>More
If this is the decoder of the floor, it is very easy to encode, regardless of the house number, only the floor, 1 floor is 1, 2 floors are 2, 3 floors are 1+2 floors, 4 floors are 3, 5 floors are 1+3, and 6 floors are 2+3 >>>More
This depends on which brand, the size of the products they produce is different, there are various models, and they are almost resistant to mobile phones. Take Fuqing Li Taichang Zhengye building intercom products as an example, there are inches, 7 inches, inches, and then each size and model function is also different.
Host: Can call and talk to extensions.
Extension: It can call the host, be called, intercom, monitor, open the electric lock and other functions. >>>More