Can E3200 be used as a server?

The overall performance of the JTTI server is very good, with CN2 GIA+BGP optimized line, multiple nodes are optional, **The configuration supports customization, after the evaluation of the third-party webmaster, it has been unanimously recognized by the webmaster and customers, whether it is hardware performance, network lines, or bandwidth quality, it can meet the needs of mainland users, the following is a summary of JTTI's server evaluation: Triple network outbound and return trip: Telecom outbound and return are two-way CN2 GIA direct connection lines; China Unicom's outbound and return trips are two-way AS9929 optimized lines; The outbound and return trips are on the mobile two-way CMI direct connection line.

In terms of local ping and global network data graphs, the latency is low, and there is basically no packet loss, with a ping value of 50ms in Hong Kong and 77ms in Singapore

If you don't recognize it, just flash to the latest BIOS, and it should be fine. After the 945 refreshes the BIOS, you can generally go to the E5200

The 965 motherboard supports the full range of older generation Cores, which is the 65nm generation. For example, 2160, E4300, E6600, Q6600 and the like. The new 45nm U can only be supported by the P31, P33, and P35 generation motherboards.

The old 965 needs to flash the BIOS to update the CPU micro ** inside the BIOS in order to recognize the latest CPU and get it working properly.

fat32 NTFS commonly used can be, but it can't be a linux server, linux is generally win2000, win2003 can be stable.

When you make a ghost, it will be installed in the most appropriate format, you don't have to worry about this, the current computer configuration is very good, no matter how much better than the previous product, what the old computer can do, the current computer is OK, so do the server.

In the configuration of the landlord, it is recommended to buy a 9500GT and DDR3 reference**280-330

If the budget is high, you can consider 9600GT and the reference price is 400-600, and it is not recommended to be higher

Won't get stuck. It's definitely not normal to account for 50% when you don't use anything, so it's better to find a better system and redo it. Wish.

1. It's good to pull all the external frequencies directly. 233 is just over this point, and it's good to go directly, and you don't have to move anything else.

ASUS motherboard general overclocking has automatic overclocking options, you can look for it, she is overclocked according to the %, generally a small overclocking can be set to 5% or 10%, her other hardware will automatically set it for you, the speed improvement is more obvious, if you use your own separate overclocking, which will be full of trouble, direct overclocking is not possible, and finally you will find that the CPU is overclocked but the speed is not fast but will decline, generally set overclocking separately to lock the graphics card frequency to 100 or 101,After that, you can super CPU,Generally, if the memory is good, you can also be small and super below,If not,The memory is also to lock the frequency,You can set the memory after the CPU is overpowered,It's best to add it little by little when you exceed the CPU,Because if you add more, you have to add voltage, otherwise it will be unstable。 Therefore, it is best to choose automatic proportional overclocking to increase the speed steadily.

The CPU is obviously lagging its feet, at least change to a Core quad-core with a 775 interface, the Q8200 kind.

Hello! According to your question, it is recommended that you call the 10000 manual service on your mobile phone for inquiry, and the telecom mobile phone dial 10000 is free. Have a great day! I hope my answer will be helpful to you, and you can log in to Hubei 10000 for more questions!

Problem type: The system sets Hualu E3200 to receive dozens of SMS, it prompts that the SMS storage is full, and the memory says that it can store 1000 messages, do you believe it? He said that when the 1000 articles are full, do you believe it? One of the easiest ways to do it.

As long as it is 775 U, it can be replaced. A screwdriver at home will do.

It's definitely E3200 Okay,My board is also G31,Same as you,I'm using 420 now,And it's also overclocked,Two years ago, it felt OK.,Now there's pressure to open more web pages.,If you want to upgrade.,E3200Don't think about it.,Just get a second-hand,At least the E5 series,It's best to do it directly on the E7 series.,It's more than three hundred.。

That's a lot more powerful.

The 775 platform, which is now almost obsolete. If you have enough budget, you can consider SNB1155 platform processors such as G530. 45 nm. Within 250 yuan and want to match a discrete graphics card, you can consider (second-hand G43100 yuan).

Why don't you choose the U of the I or A series...