Dustproof What is the best soundproof window?

Dust and noise are a major pollution in our lives, affecting our lives and moods. In severe cases, it can also cause serious damage to our physical health. Nowadays, in general home decoration, soundproof windows will be used to deal with this problem.

Dustproof and soundproof windows:

The production principle of soundproof windows is composed of two or three layers of glass and window frames, these glasses are best of different textures and thicknesses, according to the regulations, the sound insulation effect must be at least 25 decibels or more to be regarded as a soundproof window.

At present, the best sound insulation effect of doors and windows should be: the sound insulation effect of plastic steel doors and windows is the best, the sound insulation effect of aluminum alloy doors and windows is still good, but the sound insulation and heat insulation performance of plastic steel doors and windows is better than it, therefore, generally if you don't care very much, only care about the sound insulation effect, plastic steel doors and windows are the best choice, if your budget is tight, you can choose a little worse aluminum alloy doors and windows, the effect is also good, Plastic steel doors and windows and hollow glass can greatly reduce indoor noise, and well-sealed doors and windows can also save energy.

Intelligent breathing window The intelligent --- breathing system can automatically monitor the air quality of smoke, alcohol, hydrogen, carbon dioxide, formaldehyde, ozone and other air quality around the clock. Energy-saving--- breathing window power, with 12 volts of low-voltage electricity, 24-hour operation, power consumption, only a few cents per day. Sound insulation--- do not open windows, intelligent ventilation, good air comes in, noise does not come in, sound insulation national standard level 3.

The scientific --- integrated design of the vertical structure of the respiratory system and the window solves the defects of air cross-circulation. Safe --- breathe intelligently without opening the window, and do not worry about someone entering through the window; With 12 volt low-voltage direct current, there will be no electric shock accidents. Low-carbon --- no longer open windows for 24 hours in office and home, reduce the cold air of air conditioning in summer, and lose a large amount of heat energy in winter.

The environmental protection --- avoids the outdoor rain, snow, noise, sand, insects, dust, pollen, and suspended solids from entering the room after opening the window, and the cool breeze does not blow on people's bodies, so as to realize the rapid convection of indoor and outdoor air, which can improve the good air of residential and office environments. Intelligent breathing without opening windows--- and intelligent automatic monitoring of air quality make the space comfortable and quiet, and let people enjoy life healthily. Multi-protection doors, windows and curtain walls,

For every family, everyone will consider the problem of sound insulation when choosing windows. Because in a noisy environment, we can't rest quietly at all, so in the process of choosing, we must not choose to compromise because of **, otherwise we will regret it in the end.

First, the material is different

There are many kinds of glass materials, such as ordinary glass, multi-layered glass, vacuum glass, etc., the choice is relatively wide, but I personally recommend everyone to buy vacuum glass, just like its name, it is to separate two pieces of glass, and pump the air in the middle of the air, and then form a vacuum layer between the glass, and apply the propagation principle of physical factors to sound insulation, so it is the first choice for many families. However, we need to measure the size of the installation in advance, as well as the corresponding height, which can not only save time, but also complete the installation quickly.

Second, cost-effective

Although good glass will be relatively expensive, but we definitely don't choose inferior products in order to save a little money, but choose the most suitable windows for us, so that we will not think about replacing them. Because the window has a long service life, it is generally no problem to use it for 15 years, and it is not as frequent as electronic furniture, so it is worth spending on cost-effective products, even if the amount is expensive. Our home is a good example, when we choose glass, we will specifically choose cost-effective glass, so that after installation, the finishing effect looks more high-end than ordinary glass.

In addition, the soundproof glass will also feel very comfortable to the touch, and it will not look very heavy, even if it is a square dance outside, it can be well soundproofed, so these are the benefits of high-quality glassI hope that when you choose a variety of windows, you can analyze them in combination with the actual situation.

1 is very good in performance, 2 can be used for a long time, 3 thickness is particularly thick, 4 ** is more expensive, 5 materials are rare, and because of this, it can play a sound insulation effect.

I think that the glass of the window with better sound insulation will generally be thicker, and it is particularly comfortable to the touch, and the cost performance of the soundproof window is particularly high, and it is generally more beautiful, and it will look particularly tall.

The characteristics of these windows are that the sound insulation effect is particularly good, the sealing is particularly good, the windows are very tight, the quality is also very good, and the thickness of the window frame is also relatively high.

The characteristic is that it is particularly expensive on the top, and there are some soundproof materials inside, the thickness is particularly thick, it is not easy to be damaged at all, the material is particularly environmentally friendly, and has a good thermal insulation effect.

It can prevent the sound from getting louder, the glass looks very thick but is actually very thin, you can see very clearly, the surface is very smooth, and it feels good to the touch.

The sealing is relatively good, it is also very strong, the reputation is very good, the quality of the raw materials is very good, and the quality will be better.

If you are planning to buy soundproof windows, or if you are planning to buy some other products, then we must also pay attention to the relevant issues at this time. Nowadays, many people are more pursuing their own quality of life, so we must also understand this information in life, and we can also buy soundproof glass, but we must buy some quality assurance products, so that you may also like such products very much, and you can also enjoy your own life.

What do we need to pay attention to?

We may also choose to buy such products in our daily lives, and if the house you buy is in the middle of the city, we should try to buy some windows with better sound insulation at this time, so that you may also have a better sleep, if your sleep quality is very poor, your mental state will be particularly bad at this time. Therefore, we must buy products that suit us, and we must also pay attention to related issues in life, so that you may become a little easier, so these problems also need to attract our attention.

What should we do?

When we buy soundproof windows, or when we buy soundproof glass, we must go to offline physical stores to have a look. You must not buy such products on the Internet, because these products are not guaranteed, so these products may not be suitable for you, then we must pay attention to these problems in our daily life, and we can also ask others in advance, others will also give us some suggestions, so we don't want to feel too anxious, and we should also make relevant preparations in advance.

Summary. We must also pay attention to these problems in our daily life, and we must also let ourselves have a good quality of sleep. So you can buy soundproof windows, and usually in life, we can also buy some soundproof glass.

Windows with better sound insulation need to work the selection of window frames for soundproof windows. Broken bridge aluminum is a common window frame on the market. Compared with ordinary aluminum alloy, broken bridge aluminum is disconnected from the middle, and the broken aluminum alloy is connected with hard plastic, and the cavity formed has better sound insulation and heat insulation effect.

To observe the sealing seal on the window, we must understand the production process of the window, we must choose a good sound insulation effect, and the sound insulation volume must reach more than 40db. Because these data can check whether the sound insulation effect of this window is good, if the situation is not particularly good, the window should be replaced in time.

It depends on the number of layers of the window, the quality of the glass, the noise reduction mode of the window, and the material of the window. Because the sound insulation effect of windows of different materials is different.

There are many users who live next to the road or on the first floor will consider the problem of sound insulation, if you want better sound insulation, you need to pay special attention to the choice of windows, and you must look at the window frame and window glass when choosing a window with better sound insulation.

1. What points do you need to look at for windows with better sound insulation?

1. Choose the window frame of the window. Generally, the material of the window frame mainly includes broken bridge aluminum, solid wood, plastic steel and aluminum alloy, among which the sound insulation effect of broken bridge aluminum is the best, but it is similar to that of solid wood, and it is usually recommended to choose broken bridge aluminum, because although the sound insulation effect of solid wood is also relatively good, but the heat insulation will be poorer, and the sound insulation effect of the window frame of Suzhou steel is medium, but the effect of heat insulation is not bad, and the window frame of aluminum alloy is usually not recommended, because the sound insulation effect is very general.

2. Choose the glass of the window. Now the classification of glass is more, and the worst sound insulation effect is single-layer glass, but single-layer glass is now rarely used, slightly better is double-layer laminated glass, this kind of glass is sandwiched into the glue between two layers of glass, the main role is used for heat insulation and shock absorption, and the effect of sound insulation is also slightly improved, the best glass for sound insulation is vacuum glass, that is, on the basis of insulating glass, the two pieces of glass are made into a vacuum, and the sound propagation speed in the vacuum is almost 0, So the sound insulation effect is naturally better. <>

2. What are the benefits of soundproof glass?

The main function of soundproof glass is to reduce noise and prevent the transmission of sound, so that it can achieve the decibel of weakening sound, can provide people with a quieter space, and soundproof glass can effectively block the damage of ultraviolet rays, and can also prevent indoor furniture from deteriorating and fading, etc., generally soundproof glass has good airtightness, so it is difficult for the outside sand and dust to enter the house, so that it can provide a more clean and comfortable living space for the family. <>

Look at whether more soundproof cotton is added in the middle of the glass, try to choose plastic steel windows for the material of glass windows, and depending on the properties of the glass, try to choose vacuum glass, so that you can have the best sound insulation effect, and try to choose casement windows. This is because when these structures are combined, they can achieve the best sound insulation.

You need to see if the window is strong, you also need to look at the quality of the window, and you also need to see if the window will be damaged casually. Because the window must be strong, so the sound insulation is better, which is the advantage, if the window is not strong, it may break down at any time, even if the sound insulation is good, it is useless.

It is necessary to look at the firmness of the window, the thickness of the glass, whether the glass is double, the choice of sound insulation materials, and the size of the window, because these problems will affect the sound insulation effect.

It can be plasticized steel windows or added with sealing strips.

1. Plasticized steel windows. On the basis of the original window, add a layer of ordinary plastic steel windows, if the space of the original window is redundant, the sound insulation effect of the two-story window is better than that of the single-layer window.

2. Add a sealing strip. Affix glass sound insulation film or sound insulation sealing strip, sound insulation film is like a mobile phone film, which can be directly attached to the glass of the window without affecting the exposure of light. In the gaps of the windows, soundproof seals can be attached to block the entry of noise.

The best way to insulate windows is to make plastic steel windows, soundproof windows, and soundproof curtains.

1. Make plastic steel windows.

If the window sill is relatively large, you can install a layer of plastic steel window with good sealing inside or outside the window, which is good but needs to be separated from the original window by more than 10 cm, but only when the noise is not particularly large.

2. Make soundproof windows.

The soundproof window is composed of double or triple layer glass and window frame, so it is thicker than ordinary window glass, and the filling attraction material inside can absorb the sound waves of transparent glass well, and the sound insulation effect is better.

3. Soundproof curtains.

Replace the original ordinary curtains with soundproof curtains, and also use an environment where the dry noise is not very large, the short linter on the soundproof curtains can absorb some noise, and the soundproof curtains are thicker than the general curtains, which can also reduce the noise.

Soundproof doors and windows

It is made of plastic steel, aluminum alloy, carbon steel, and cold steel plate building hardware materials, extruded into forming materials, and then made into door and window frame sashes by cutting, welding or screwing, and equipped with sealant strips, wool tops, hardware, glass, dust lead PU, suction cotton, wood plates, steel plates, asbestos plates, galvanized iron sheets and other environmentally friendly sound-absorbing and sound-absorbing materials.

At the same time, in order to enhance the rigidity of the profile, the cavity of the profile exceeding a certain length needs to be filled with steel lining (reinforcing ribs), and the doors and windows made in this way are called soundproof doors and windows.