The computer can t enter the interface, and a string of English appears

Have you ever removed your hard drive? Or have you ever attached another hard drive? If you have touched the hard drive, most likely it is because your data cable is wrong, or the power supply of the hard disk is not plugged in, if you have not touched the hard drive, recall your BIOS settings again, the initial settings or optimize the settings.

Summary. 1) The motherboard BIOS is out of power, and you can't remember the hard disk information, if your system date is incorrect, it is likely to be the reason. Solution: Replace the BIOS battery and re-enter the BIOS to detect the hard disk.

What should I do if a string of English appears on the computer and cannot enter the desktop?

1) The motherboard BIOS is out of power, and you can't remember the hard disk information, if your system date is incorrect, it is likely to be the reason. Solution: Replace the BIOS battery and re-enter the BIOS to detect the hard disk.

Can you elaborate on that a little bit more?

1) The motherboard BIOS is out of power, and you can't remember the hard disk information, if your system date is incorrect, it is likely to be the reason. Solution: Replace the BIOS battery and re-enter the BIOS to detect the hard disk.

2) The IDE cable is of poor quality or is not well plugged in. Solution: Change an IDE cable or plug the IDE cable into another IDE slot on the motherboard, do not connect the hard disk cable with other IDE devices, such as optical drives, separate the two IDE cables, and set the master and slave disks correctly.

3) The hard drive is faulty and may need to be replaced. 4) If your computer can detect the hard disk every time and cannot enter the system, reformat the hard disk completely and reinstall the system. 5) Also set the hard disk to boot to try (is it wrong).

6) There is also a situation where replugging and unplugging the memory and cleaning the gray can also solve the problem (sometimes caused by it). 7) If you can't solve it yourself, it is recommended to overhaul it. 8) The above method is to follow the general cause and solution according to the English prompt, because the computer is in your hands, and you should find out the root cause of the problem according to the situation on your computer.

Summary. 1. If the file is lost or the key driver is uninstalled, it will cause the English interface to stay for a long time when booting up, and you can't enter the system. In this case, you can press and hold F8 to restart the computer and then try to enter"The last correct configuration", and then restore the computer's system to recovery.

What should I do if a string of English appears on the computer and cannot enter the desktop?

There are several common reasons why the computer does not move in English: the first is that there are F1 and F2 letter prompts, and you can enter the system by pressing the F1 or F2 key; The second is to prompt the Ctrl+Alt+Del key, which is generally a system file that is corrupted and can be recovered by reinstalling the system; The third is a prompt that starts with diskboot, which is generally not found.

Fellow, I really didn't understand, I can be more specific.

1. If the file is lost or the key driver is uninstalled, it will cause the English interface to stay for a long time when booting up, and you can't enter the system. In this case, you can press and hold F8 to restart the computer and then try to enter"The last correct configuration", and then restore the computer's system to recovery.

Summary. Hello, this is the system scanning your hard drive, it may be a problem of your own operation, if you shut down illegally, directly power off or directly press the power to turn off, the computer will check your hardware when it is turned on, including your hard disk. There is a real hard disk problem with your computer, it is recommended that you use the disk scanning tool that comes with the computer to scan and repair, if it is more serious, use the following software to repair.

What should I do if a string of English appears on the computer and cannot enter the desktop?

Hello. Look at what's going on.

Hello, this is the system scanning your hard drive, it may be a problem of your own operation, if you shut down illegally, directly power off or directly press the power to turn off, the computer will check your hardware when it is turned on, including your hard disk. There is a real hard disk problem with your computer, it is recommended that you use the disk scanning tool that comes with the computer to scan and repair, if it is more serious, use the following software to repair.

Solution: 1. Press the delete key to enter the BIOS interface when booting up, change the first boot item to CD-ROM drive or USB disk boot in the device boot sequence management item, and then save and exit. 2. Put the disc into the optical drive or insert the boot USB disk into the computer and boot it, select the PE system when you boot into the options, and then you can partition and format the hard disk after entering the PE system, and then copy the system installation file to the partition of the computer for later use.

3. Start Ghost on the desktop of the PE system, and then mirror the system files to the system disk (C disk) and exit Ghost after the image is completed, and then restart the computer for system installation, and restart the computer when the system installation is completed. 4. After the system installation is completed, you can go to the official website of the computer driver to install, including the motherboard, sound card, graphics card, network card, etc.

What should I do if a string of English appears on the computer and cannot enter the desktop?

Hello, I'm glad to answer for you,1、Generally, when you can't turn on the machine,It will display such English,Maybe it's not a normal shutdown of the car,Or caused by other software problems,Hidden head then we need to make it work normally。 2. You need to restart the computer, at this time, you can use the shortcut key to restart, and press the key combination of Alt + Ctrl + Delete on the keyboard at the same time to restart.

3. Restart the computer while holding down the F8 key of the keyboard, the computer will enter the advanced boot option closed or, this step with the up and down keys of the keyboard, select "the last correct configuration (advanced)", then the computer will start the computer from the last normal boot. 4、After the last restart, you can boot up and enter the system normally,On 2022-05-28Grab the first like 1Next。