When the computer is turned on, the English interface appears. 100

There are several common reasons why the computer turns on and the English does not move:

The first is that there are letter prompts for F1 and F2, and you can enter the system by pressing the F1 or F2 key;

The second is to prompt the Ctrl+Alt+Del key, which is generally a system file that is corrupted and can be recovered by reinstalling the system;

The third is a prompt that starts with diskboot, which is generally that the hard disk is not found, and the hard disk data cable and power cable are replugged or replaced.

Maybe it's caused by an abnormal shutdown or other software problem, you need to restart the computer first, and press the alt+ctrl+delete key combination on the keyboard to restart.

Restart the computer while holding down the F8 of the keyboard, the computer will enter the advanced boot options, by using the up and down keys of the keyboard, select "Last correct configuration (advanced)", then the computer will start the computer from the last normal boot.

If our computer boots up normally, you can use PC Security Guard to scan your computer to check if there is a security problem. If pressing the F8 key does not enter the "Advanced Boot Options", or if the system does not boot normally after selecting "Last Correct Configuration (Advanced)", it is recommended to reinstall the system.

Analysis: This screen appears indicating that the system files are corrupted and the system needs to be reinstalled.

Processing: 1) Prepare the system CD: If you don't have it, you can go to the computer store to buy it, and you can buy the latest version of the CD of whatever system you need to install. If you have a burning CD-ROM drive, you can also go online and burn the system files in ISO format to a system CD.

2) Set the CD to boot: press the DEL key (the notebook is generally F2 or the hotkey prompted at the bottom of the screen) to enter the CMOS after booting, and set the optical drive (CD-ROM or ***-ROM) as the first boot item in the Boot tab (or Startups) (the old motherboard needs to enter the Advanced BIOS Features tab, press Enter at "1st Boot Device", and then select CD ***-ROM), Press F10 again to save and exit the reboot. Insert the system disc into the optical drive in time when you restart the computer.

3) Clone and install the system: After the disc is successfully started, the function menu will be displayed, at this time, select "Install the system to the first partition of the hard disk" in the menu, press enter to confirm and follow the prompts, or after entering the PE system, run the "one-click installation system" on the desktop, the computer will automatically run the GHOST software to automatically load the GHO file and clone and install it to the C area, the whole process basically does not require manual intervention, until the last entry into the system desktop.

Note: After the installation of the system is completed, first install security software such as 360 Security Guard plus 360 Antivirus or Kingsoft Antivirus and other security software, conduct a comprehensive check and kill Trojans and viruses, and then patch the system, install common software, and install a one-click restore tool for system backup, in case of emergency.

Summary. Hello dear and happy to answer your <>

Reasons and solutions for the English interface that cannot be entered when the computer is turned on:1After you need to restart, the cause of the problem is that the memory module or graphics card cheat is oxidized or the socket is not in good contact, which causes the computer to fail to boot up.

3. If there is a problem with the graphics card, it is recommended to replace the graphics card. Use the shortcut key to restart, and press the keyboard combination Alt+Ctrl+Delete to restart.

When the computer is turned on, the English interface appears.

Hello dear and happy to answer your <>

Reasons and solutions for the English interface that cannot be entered when the computer is turned on:1After you need to restart, the cause of the problem is that the memory module or graphics card gold finger is oxidized or the slot is not in good contact, and the guide is bent until the computer cannot be turned on.

3. If there is a problem with the graphics card, it is recommended to change the graphics card. Use the shortcut key to restart, and press Alt+Ctrl+Delete on your keyboard to resell Wise.

Hello dear to you, expand or pure acacia for you as follows <>

Reasons for the white screen of the computer boot: The reasons are: display screen problems, graphics card problems, insufficient loading of running memory, loose memory modules, poor heat dissipation of the display, dust in the machine, damage to the screen line or LCD screen, screen cable failure, LCD panel drive circuit problem, LCD panel power supply circuit problem, poor screen line contact, motherboard control circuit problem, graphics card or ** line poor contact or damage, etc.