How can there be a murmur when the mobile phone YY speaks?

Normal,YY transmits audio data through the mobile phone network,And the mobile phone directly uses the microwave to send and receive sound signals is not the same,The network bandwidth directly limits the ability of the mobile phone YY to transmit data,So the sound quality will be worse than the mobile phone**,This is normal。

The phone's network is unstable, mind using it in places where there is a wireless network.

Brother tell you ... Click on the control panel - sound and audio equipment - volume device volume - advanced - options --- properties - tick the microphone --- then the microphone will appear as a block --- options --- check the advanced control - the microphone will have an advanced --- click on the advanced to see that there is no other control--- the microphone enhancement is checked and canceled directly!! Please YY strengthen this microphone and modify it.。。。

Although it was canceled on YY after clicking, it was not canceled on the computer!! That's a problem!! Open the bottom left corner of the computer, and there is a small speaker icon.

Then there's a master volume, click on the options column, there's a submenu of properties, and then you'll see that there's a mixer, you select the second one, put the master volume, waveform, software synthesizer, line volume, front mic, microphone volume, cd volume on, don't select the others, and then it's OK.

If it works for you, be prompt.

The mobile phone YY is very noisy, and the following six steps can help you solve the problem: 1. First click on the installed Tanpai YY live broadcast icon on the desktop of the mobile phone. 2Then, on the main interface of the YY live broadcast software that opens, click the ** tab at the bottom. 3. Then click on the Settings button on the right side of the Cloud toolbar.

4. Next, on the settings page that opens, click the sound effect button. 5At this time, the sound effect adjustment menu will be opened, and the vocal settings will be found. 6. Vocal noise can be canceled by dragging the slider.

[Cause Analysis]:

1.There is electromagnetic interference next to the sound output device.

2.The sound output equipment is aging.

3.Sound-related hardware acceleration setup issues.

Easy Steps]:

Solution]:

Solution 1: There is electromagnetic interference next to the sound output device, poor contact of the audio interface, etc., such as: mobile phone interference, the speaker interface is not firmly plugged in, etc.

Solution 2: The sound output equipment is aging, and if the sound is too loud, it will emit a whistling sound, and the sound output equipment such as the sound output device will be replaced.

Click [Start] - [Run].

Then enter [DXDIAG] in the run window, directly hit the [Enter] key on the keyboard, or click the [OK] button below.

After the pop-up window, select [Sound]—pull the [Sound Acceleration Level of Hardware] to the left to adjust the [Basic Acceleration].

When QQ and YY voice, how to eliminate microphone echo, noise, and noise.

That's probably because someone is talking to you at the same time, if not, you look at the microphone below YY, and see if there is an open microphone amplification (sometimes you don't pay attention to the amplification microphone) If it's not, it is recommended to check the microphone! Hope.

First of all, it may be that you use the crooked sound amplification below, and there are many people who use it and there is noise! You can put the check mark no! If there is still noise, it may be a problem with your microphone, you can try another microphone!

If it still doesn't work, it's a problem with your computer jack, you can let someone who understands this aspect see how to help you clean up the ash and check if there is a problem with the contact! That's all there should be.

The landlord saw that the microphone noise reduction was not.,Tick that one.、You can also turn off the free microphone.、It's from free speech to press f2 to speak.、Then people will feel a little better I wish the landlord a happy game.,、good luck

Hello! I'm a YY volunteer – Muxiu is happy to serve you!

We apologize for keeping you waiting! Please tell me which version of your YY you are in? Hope you mine and thank you!

Now yy is not a free microphone, you have to press f3.

When QQ and YY voice, how to eliminate microphone echo, noise, and noise.

When you turn on the reinforcement, you should also turn on the noise reduction.

When QQ and YY voice, how to eliminate microphone echo, noise, and noise.

When QQ and YY voice, how to eliminate microphone echo, noise, and noise.

1.The echo of hearing one's own speech in YY voice is mainly a problem with the software settings.

2.In YY's voice settings, select the microphone return air noise suppression answer and echo cancellation, and strengthen the microphone in front without ticking.

3.Microphone settings: A small speaker in the bottom right corner.

Right-click on the recording device, set the existing microphone as the default device during recording, and double-click the microphone or dot property.

In the level, you can adjust the volume of the microphone and the microphone reinforcement (this is adjusted appropriately, and some computers will have current sound), and select noise suppression and echo cancellation in the enhancement.

4.Select Listen to this device in the listening, you can hear your own voice, if you don't want to hear your own voice, don't check it in front of it (don't choose this normal use, some computers will be stuck or noisy).

When QQ and YY voice, how to eliminate microphone echo, noise, and noise.