What material is better for kitchen cabinet materials, and what materials are good for kitchen cabin

What is the best material for cabinet material? 1. Solid wood cabinets, solid wood cabinets are the cabinets we have seen more, and they are also cabinets with a very good reputation, solid wood cabinets are more high-end and environmentally friendly, but they also have their own defects, good solid wood cabinets are relatively high, and cheap solid wood cabinets are relatively cheap. 2. Plexiglass, if there are some problems in the construction process that are not perfected, it is easy to have a lot of troubles later.

Plexiglass is a relatively high-end cabinet, which looks more comfortable, easier to clean and more durable, but the construction of crystal glass cabinets is more difficult.

What material is better for the cabinet body, this is a question that everyone is concerned about, here I will briefly talk about the cabinet body has MDF, moisture-proof board (also known as melamine board and love home board}, fir integrated board, marble and stainless steel, etc. The cabinet made of fir board needs to be painted or pasted with fireproof board (easy to scrub) and the appearance must be pasted with white or veneer of the same color as the door panel, the cost is higher, the labor cost is also high, the flatness is not as good as the MDF or moisture-proof board, and the waterproof performance is better than the MDF or moisture-proof board. The cost of the cabinet made of fir integrated board is twice as high as that of MDF and moisture-proof board, or even more, and the nail holding force is worse than that of the cabinet made by the moisture-proof board, and the screws are easy to loosen, so it can only be used for cabinets with small door panels.

Relatively speaking, the cabinet made of cedar integrated board is slightly better than the cabinet made of moisture-proof board. MDF and moisture-proof board are about the same, and the moisture-proof board is slightly lower than the hard nail holding force. Marble and stainless steel can only be used as cabinets and the cost is too high, so they are rarely used.

All or moisture-proof boards are good.

1. Double veneer: The base material of the double facing cabinet is MDF, particleboard and other wood-based panels, and the outside is pasted with decorative paper of various colors and patterns impregnated with melamine.

The advantages of double veneer are that the wear resistance, corrosion resistance, and deformation resistance are very good, and the appearance of the choice is also diverse, cost-effective, so it is also the most widely used.

2. Acrylic: also known as specially treated plexiglass, with a strong three-dimensional effect. The acrylic cabinet door has good toughness and is not easy to break; Strong restorativeness, as long as you dip the toothpaste with soft foam, you can wipe the sanitary ware new; The texture is soft, and there is no cold and biting feeling in winter; The colors are bright and can meet the personality pursuit of different tastes.

3. Baking paint door: It is a substrate door panel that is heated and dried by paint in the drying room after painting. Lacquered doors are waterproof and moisture-resistant, durable, and particularly easy to clean. There is also a wide variety of color patterns.

4. Molded door: also called hollow plywood door, its material is made of MDF, and then the decorative board made of PVC film. The molded door is rich in color, the wood grain is realistic, and it does not crack or deform.

Due to the strong plasticity, there is no need to seal the edge around the molded plate, which solves the problem that the glue may be opened after the edge banding for a long time. Good waterproof performance and environmental protection.

5. Titanium plate: also known as stainless steel titanium plate, it is polished into a mirror surface with stainless steel plate, and then plated with a layer of high wear-resistant and corrosion-resistant golden titanium nitride layer with large vacuum coating equipment.

The advantages are bright color, easy to shape, strong visual impact, very beautiful and fashionable, excellent waterproof performance, strong anti-fouling ability, and easy to clean.

1.From a safety point of view, it must be fireproof board, general kitchen ecological board, particle board without paint board, or solid wood composite board. Custom cabinets are mostly particle boards.

2.Fireproof board.

The fireproof board is made of surface paper, kraft paper, and colored paper by melamine resin ingredient, which has certain fireproof performance and is not incombustible.

It is suitable for cabinets, and the doors are mostly flat shapes with rich colors. Fireproof board should choose brand famous products, small manufacturers of machine technology level may not be able to reach, quality is difficult to guarantee.

2.Eco boards.

Commonly used furniture making boards, melamine impregnated paper finish, the middle is a large core board, which is a flammable board. The moisture-proof performance is acceptable, and the fireproof performance is average, which is no different from solid wood. Good environmental protection.

3.Particle boards.

The particle board is made of wood chips hot pressed at high temperature, with small deformation coefficient, acceptable environmental protection, general moisture resistance, and general fire performance. Features are economical.

4.Other cabinet practices.

The cabinets are built with red bricks, which are strong and durable, environmentally friendly and pollution-free, fireproof and moisture-proof.

Steel frame tile cabinets, with aluminum alloy as cabinet frames, double tiles as compartments, partitions. Environmentally friendly, non-toxic, good fire and moisture resistance.

The above two types of cabinets require custom doors, which can be customized with mirrored stainless steel or wooden doors. The countertops are made of marble or quartz.

Stainless steel cabinets, using stainless steel to make cabinets, environmental protection and fire and moisture resistance are good. It is that the decorative effect is poor and the color is single.

5.Personal advice.

If you like wood, it is recommended to use ecological boards, or solid wood finger jointed boards. Economical selection of particle boards.

Good environmental protection, strong and durable, choose brickwork.

species, blockboard. The second type, fir planks. Type 3, MDF.

The fourth type, solid wood particle board. Type 5, solid wood multi-layer board. The sixth type, ecological paint-free board.

The 7th type, fireproof board. These 7 kinds of plates are very good, you can first understand it, and then consider it in combination with the actual situation at home. If it were me, I would personally prefer solid wood multi-layer boards, which are made of solid wood, do not contain formaldehyde, and are easy to use.

An indispensable part of kitchen decoration is to choose cabinets, and common cabinets include direct customization of wooden cabinets, wooden cabinets, aluminum alloy cabinets, and brick cabinets.

However, in the long-term use, many owners find that wooden cabinets are easy to regain moisture and mildew after a long time, and every time they are cleaned and hygienic, they are particularly troublesome.

And the decoration masters generally advocate brick cabinets, after all, they have been used for so many years and have always been loved by everyone. The so-called brick cabinet is to use ceramic tiles or red bricks to build a reasonable masonry cabinet body according to the design drawings.

After the cabinet masonry is completed, after the water pipe is reserved, the countertop of the cabinet is poured, and the countertop will be erected with ceramic tiles in the pouring process, and the steel bar support will generally be arranged in the template to increase the stability of the cement countertop after pouring.

If you are building a cabinet in your own house, it is recommended that you must do the step of arranging steel bars, and do not save money.

After the steel bar is arranged, the cement is poured, first leveled with dry slurry (semi-wet cement and sand), the large particles of debris must be picked out at the level, and the dry slurry is dried thoroughly, and then the cement slurry is pasted with marble, the purpose of using dry slurry is to reduce shrinkage and prevent marble hollowing.

Once the countertop is completely dry, you can choose to wrap the stainless steel countertop or use a whole piece of marble as the countertop.

In addition to brick cabinets, there is also a new type of cabinet practice, which is ceramic tile alloy cabinets, in general, it is 304 stainless steel countertop + ceramic tile cabinet body + crystal steel cabinet door = ceramic tile alloy cabinet.

The brick cabinet is made of ceramic tiles, which has the effect of being durable, anti-corrosion and high-temperature resistant.

The crystal steel cabinet door panel has the characteristics of high strength, hard surface, smooth, light transmission, no peculiar smell, water insulation, high temperature resistance, etc., and is not easy to foam and deform, easy to clean, and has a strong service life.

However, the cost of ceramic tile alloy cabinets is generally relatively high, and you need to make a budget for yourself in advance when you choose to do it.

There are many types of materials for kitchen cabinets, each with its own advantages, but no matter which material you choose, you must consider the following two points, so that you can make your kitchen cabinets strong, durable and never tired of looking.

1. The material should be easy to clean.

Cabinets basically have to be scrubbed every day, so we must choose materials that are easy to clean, so as to keep the kitchen tidy at all times, otherwise it will increase our workload in the later stage;

2. The material should be environmentally friendly and moisture-proof.

The cabinet has been in a high temperature and humid environment for a long time, so it is necessary to pay more attention to its moisture-proof, waterproof and high-temperature resistance in the selection of cabinet panels, and the right plate can make the cabinet life up to 30 years. When selecting cabinet materials, we should focus on the environmental protection and moisture-proof performance of the board, which must be measured by the environmental protection index of the board (at least reaching the national standard E1 level) and thickness (16-18mm).

Solid wood cabinets. We usually see the most cabinets made of solid wood, this kind of cabinet is quite recognized by consumers, its advantage is environmental protection, but generally high-end cabinets made of solid wood are more expensive, of course, the cabinets made of solid wood are cheaper.

Stainless steel cabinets.

Nowadays, the more fashionable cabinets on the market are stainless steel cabinets, which have the advantage of being easy to clean and are favored by young consumers, but its biggest disadvantage is that the heatstroke resistance is not good.

PVC cabinets.

The well-known blister board cabinet is often called PVC cabinet, the advantage of this cabinet is that it is more waterproof and moisture-proof, but because it cannot withstand high temperatures, it is quite easy to deform.

Plexiglass cabinets.

One of the most high-end cabinets is the plexiglass cabinet, which is comfortable, easy to clean and durable, but it can be a hassle to install and can cause a lot of trouble if something goes wrong.

laminate cabinets.

The laminate cabinet, listen to the name, you know that it is resistant to high temperature, and the color is quite bright and beautiful, but its quality is difficult to guarantee, if it is not used well, it is easy to degum and deform.

Melamine board cabinets.

Compared with the previous cabinets, the comprehensive quality of the cabinet made of melamine board is a little better, although its waterproof performance is not very good, but it has the advantages of friction resistance, impact resistance, high temperature resistance, heat resistance, acid and alkali resistance.

The knowledge of cabinet materials is introduced here, I believe that everyone knows what materials are used in cabinets after reading the above introduction, no matter what kind of cabinets are purchased, it is the most important thing to use them handily.

The cabinet moisture-proof board is very good to choose ***, now there is stainless steel, there are also stone, the latest and Hexiang board, zero formaldehyde, the door panel has solid wood, paint, blister, crystal, etc After a long time of stainless steel, the pad plate below is deformed, and he will change it, and it can't be repaired, and now there is a high point of anti-cracking stone, but it will not burst.

Each kind of kitchen cabinet material has its own advantages and disadvantages, and when choosing building materials, we should take the principle of minimizing the harm to the body, on this basis, taking into account the beauty and practicality, so as to choose the best kitchen cabinet building materials for us. Here are some examples of the advantages and disadvantages of kitchen cabinet materials:

1. Double veneer, double veneer (also known as ammonia) is based on particleboard, and the ammonia veneer on both sides is made by hot pressing by the plate manufacturer at one time, and the material performance is stable.

Due to the stable properties of this material, it generally does not release substances that are harmful to the human body. The advantages of double veneer are natural color, smooth surface, good wear resistance, this kind of plate is pressed by the manufacturer at one time, provided to the manufacturer of the formed plate, the technical performance is stable and not easy to deform. The disadvantage of double veneer is that there are fewer décor colors and there is not much room for color selection.

2. Fireproof board door panel, fireproof board door panel (also known as fire-resistant board), it is made of particleboard as the base material, and then selected different brands of fireproof veneer, pressed with 30-50 tons of cold press.

The advantages of fireproof board are that the surface is relatively flat, not easy to deform, and has a long service life. The surface is resistant to high temperature, not afraid of heat, not afraid of scalding, instantaneous high temperature resistance can reach 280 degrees, and the cigarette butt is directly extinguished on it, and the surface will not be burned. The moisture-proof and seepage-proof performance is also relatively good.

Because this material is resistant to high temperatures, it is a better choice for cabinets. The disadvantage of fireproof board is that it must be edge-banded, and it can only be made of flat plates, which cannot meet your needs in pursuit of modeling.

3. Solid wood door panels, the frames of solid wood door panels are solid wood, and there are two kinds of door core panels, one is solid wood board, and the other is veneer on MDF, and then plugged into the frame.

The advantage of solid wood door panels is that the shape is rich, the color is real, it is the first choice for classical decoration style, and can make the kitchen full of a noble atmosphere. The disadvantage of solid wood door panel is that it is high, the process is difficult to control, there are too few good solid wood door panels on the market, and deformation and cracking are the most prone problems of solid wood door panels. One of the most fatal shortcomings of solid wood door panels is flammable and damp, and it is not recommended to use solid wood door panels as a building material for kitchens, where water is often seen and fires are often seen.

The choice of kitchen cabinet materials is closely related to each of our families, and what kind of kitchen cabinets to choose should be selected according to the family's aesthetic taste, economic strength and other comprehensive considerations. However, we can learn about this aspect of Simi Cabinets, which are imported from Austria with Blum door hinges, top integrated damping system, soft and silent, and smooth switches.

Simi cabinets are made of cold-rolled steel with nickel plating, with a load capacity of 30kg and durability; After 48 hours of salt spray test, it has reached a grade 10 oxidation and corrosion resistance level, and the wear-resistant nylon material treatment technology is used inside, which can be opened normally 200,000 times, opened and closed 28 times a day, and can be used for more than 25 years.