-
Anonymous users2024-02-09The trumpet knife is 1 to 1 to 2 to 1
The No. 5 knife is 1 to 1
The No. 1 cutter bowl cam is 2 to 1 to 3 to 1, the plate cam is 3 to 1, the tailstock punch bowl cam is 1 to 1
-
Anonymous users2024-02-08234 is 1 to 1;
2 to 3 to 1 for the first knife;
The number five is 1-1;
Punching is more than 1;
-
Anonymous users2024-02-07Ningjiang automatic lathe: give you a drawing and cam, how to put it ,..
-
Anonymous users2024-02-06Summary. The proportional adjustment of the punching cam of the automatic lathe needs to carry out the key calibration and program adjustment of the machine tool, and the specific method needs to be adjusted in combination with the lathe equipment manual.
How to adjust the ratio of automatic lathe punching cam 1:2.
The proportional adjustment of the punching cam of the automatic lathe needs to carry out the key calibration and program adjustment of the machine tool, and the specific method needs to be adjusted in combination with the lathe equipment manual.
Excuse me, but please go into more detail?
The ratio of the punching cam of the automatic lathe refers to the ratio of the height and length of the bulge of each cam. If you want to adjust the ratio of the cam to 1:2, you need the following steps:
First of all, the height of the bulge and the length of the limbs of each cam are determined, and the ratio value is calculated whether the ratio is 1:2. If it does not meet the requirements, it is necessary to adjust the speed of the lathe, the feed rate and the position of the tool to increase or decrease the amount of material removed from the cam, so as to achieve the purpose of adjusting the cam proportion.
In the adjustment process, it should be noted that the change of cutting parameters will also have a certain impact on the size and shape of the mess, so it is necessary to accurately position and adjust. Eventually, it is adjusted repeatedly until a 1:2 cam ratio is reached.
-
Anonymous users2024-02-05Cam type automatic lathe is a rapid burning through the cam to control the processing of acres such as the program of the automatic section of the processing machine tool, in the machining automation machine tool is widely used, characterized by fast processing speed, high processing accuracy, automatic feeding, automatic shutdown after the material, one person can operate multiple machine tools.
-
Anonymous users2024-02-04The feeding automation and the automatic movement of the cutting tool are controlled by cams. Cam type automatic lathe uses two kinds of cams: one is a cylindrical form, after its end face is processed into various forms, the cam rotates, and the rotary motion of the cam becomes the linear motion of the tool holder through the connection of the transmission connecting rod and the rocker arm.
This cam is called a bowl cam and is mainly used for the axial cutting direction of the machined parts. the other is a circular plate-like form, which is processed into the desired shape around its periphery, and then the rotary motion of the cam becomes the linear motion of the tool through the transmission rod connected with the tool holder; This cam is mainly used in the radial cutting direction of the machined part. By combining the left-right, forward-and-back movements of these two cams, the tool can be walked in an inclined or curved direction.
FANUC CNC machine time adjustment, in MDI mode, found"offset"Key to open the program to modify, change "0" to "1" and then press to turn the page until you find the time to adjust, and then modify the time The parameters of the time are different for different brands, it is best to look directly at the manual of the model to operate. >>>More
x=2r(1-tgq 2)tgq r is the radius of the tip tgq is the angle of the chamfer thief 45° is 45 30 is 30 z=r(1-tgq 2) to give you an example, the length of the chamfer 45 is the chamfer of c1 The outer yard turning tool The outer diameter of the bar with an outer diameter of 20 is x=2* is approximately equal to This is the knife to make up and then the chamfer of C1 1*2+ The outer diameter minus z=r ( is approximately equal to Then the chamfer of C1 1+ The program is z0 So so. However, in general programming, just cutting chamfer outer diameter There must be a reserve in the program, which is the z distance before cutting to the end face, which is generally the distance that must be added in the program, for example: or the chamfer of C1 x=2(x1+x2)+2r(1-tgq 2)tgq=2(1+program: >>>More
Very simple. If the school uses a main network cable, it is connected to each dormitory. >>>More
You can craft a variety of mechanical items, take the drill bit as an example- >>>More
This material is soft and flexible. It is more difficult to process soft materials than hard materials. The best way is to machine white steel cutters with high-speed steel turning tools. >>>More