What s going on with the computer flashing so badly The refresh rate has been adjusted

The display screen has a flickering sensation, and if you pay attention, there is a slight shaking. This is also a common problem that everyone encounters. This is caused by the low refresh rate of the display, if the refresh rate is lower than 75Hz, there will be a flickering feeling, and the eyes will be very tired when looking at the monitor like this for a long time.

Turning up your computer's refresh rate will fix the issue. Choose 85Hz or 100Hz. Workaround:

Display Properties sets the Advanced Adapter refresh speed.

In one case, the opposite is true, if the refresh rate of the display is too high, the bandwidth of the display is small, and the refresh rate is not too high, the monitor will switch between different refresh rates frequently. The switch will have a grating flickering with a sound.

In some brand phones, the resolution and refresh speed of the display do not go up, or there is no higher mode. In fact, many of these cases are due to outdated drivers that come with the brand's own machines. Workaround:

Reinstall with a new graphics driver. If a friend's monitor is undriven, you can adjust the refresh rate of the monitor by choosing a driver of a similar model.

Determine the premise of excluding voltage and external magnetic field interference.

If the problem persists, it can be considered a hardware problem.

The voltage is unstable or about to break!

Problems with voltage or graphics card drivers or displays.

If the graphics card driver is installed correctly, then you can see if the voltage is stable and unstable, and there is no problem with the voltage stability, then it is basically a problem with the display.

The voltage is seriously insufficient. or issues with graphics card drivers.

Troubleshoot the voltage and reinstall the driver.

All of the above are possible! But I'll add a very common question:

Look at what electrical appliances with magnetic fields are placed next to the monitor, for example, placing the sound bubble too close to the monitor will cause strobe!

Problems with graphics drivers or monitors.

Summary. display, the possibility of hardware failure is relatively small. Lift the display DP cable socket up, which means that the DP plug should be plugged in tightly, so that the operation can eliminate the fault, and it should be the interface contact problem.

There is no problem with 60Hz because the frequency is low and the data is relatively less susceptible to interference, while the refresh rate of 144Hz more than doubles the amount of data transmission, so it is susceptible to infection.

If you have this kind of problem, it is recommended to replace a high-quality brand DP signal cable, which should solve the problem.

Why does the refresh rate of the computer screen flash when it is turned up and it does not flash when it is turned down, and the 144 hertz that has been used all the time suddenly flashes away.

display, the possibility of hardware failure is relatively small. Lift the display DP cable socket up, which means that the DP plug should be plugged in tightly, so that the operation can eliminate the fault, and it should be the interface contact problem. There is no problem with 60Hz because the frequency is low and the data is relatively less susceptible to interference, while the refresh rate of 144Hz more than doubles the amount of data transmission, so it is susceptible to infection.

If you have this kind of problem, it is recommended to replace a high-quality brand DP signal cable, which should solve the problem.

If your monitor has a black screen and a flickering screen, one reason is that your voltage is not very stable, and another reason is that you adjust the 144Hz to be relatively high!

Hello, I am glad to serve you, and I will give you the following answers: There are many ways to solve the problem of switching to a high refresh rate splash screen on the computer, and the following is a way to simplify this list:1

First of all, open your computer's display settings, check the current refresh rate, if it's 60Hz, you can try to adjust it to 75Hz or 85Hz; 2.Then, in the display settings, adjust the display mode to "Normal" to support a higher refresh rate; 3.After that, in the display settings, update the graphics driver to the latest version to ensure that the higher refresh rate is supported.

The above is the way to solve the problem of switching high refresh rate splash screen on the computer, before changing the settings, it is recommended to back up the system first, in case of unexpected situations. Also, if you still see a flickering screen after changing your settings, you can try changing your monitor to make sure it's performing well enough to support a higher refresh rate.

Hello, I am glad to serve you and give you the following answers: Cause of the problem: 1. The refresh rate of the display is too high:

When the refresh rate of the display exceeds the maximum refresh rate of the graphics card, the screen flickering occurs. 2. Incompatible graphics card drivers: If the graphics card drivers are incompatible, there will also be a splashing screen.

Solution: 1. Reduce the refresh rate of the display: First, check whether the refresh rate of the display exceeds the maximum refresh rate of the graphics card, if it does, you need to reduce the refresh rate of the display to achieve the best display effect.

Steps: 1. Right-click on the desktop and select "Properties" before messing up; 2. In the "Properties" window, click "Settings"; 3. In the "Settings" window, click "Advanced"; 4. In the "Advanced" window, click "Display"; 5. In the "Display" window, click "Refresh Rate Hall Clear"; 6. In the "Refresh Rate" window, select a suitable refresh rate, and then click "OK". 7. Restart the computer and check whether the splash screen problem is solved. 2. Update the graphics card driver

If the graphics card driver is not compatible, you need to update the graphics card driver to achieve the best display effect. Steps: 1. Open "Device Manager"; 2. In the "Device Manager", find the graphics card, right-click, and select "Update Driver"; 3. In the "Update Driver" window, select "Search for Drivers from Local Computer"; 4. In the "Search Driver" window, select "Graphics Driver".